<abstract xmlns="http://www.w3.org/1999/xhtml"><p> To effectively produce clean heat energy from biomass, microwave (mw) pre-processing of its different types - pelletized wood (spruce), herbaceous biomass (reed canary grass) and their mixture (50:50) - was carried out at the 2.45 GHz frequency with different durations of biomass exposure to high-frequency oscillations. To estimate the mw pre-processing effect on the structure, composition and fuel characteristics of biomass, its thermogravimetric (TG), infrared spectroscopy (FTIR) measurements and elemental analysis were made. The pre-processing is shown to enhance the release of moisture and low-calorific volatiles and the partial destruction of biomass constituents (hemicelluloses, cellulose), promoting variations in the elemental composition and heating values of biomass. The field-enhanced variations of biomass characteristics and their influence on its gasification and combustion were studied using an integrated system of a biomass gasifier and a combustor with swirl-enhanced stabilization of the flame reaction zone. The results show that the mw pre-processing of biomass pellets provides a faster weight loss at the gasification, and, therefore, faster ignition and combustion of the activated pellets along with increased output of heat energy at their burnout</p></abstract>

To effectively produce clean heat energy from biomass, microwave (mw) pre-processing of its different types - pelletized wood (spruce), herbaceous biomass (reed canary grass) and their mixture (50:50) - was carried out at the 2.45 GHz frequency with different durations of biomass exposure to high-frequency oscillations. To estimate the mw pre-processing effect on the structure, composition and fuel characteristics of biomass, its thermogravimetric (TG), infrared spectroscopy (FTIR) measurements and elemental analysis were made. The pre-processing is shown to enhance the release of moisture and low-calorific volatiles and the partial destruction of biomass constituents (hemicelluloses, cellulose), promoting variations in the elemental composition and heating values of biomass. The field-enhanced variations of biomass characteristics and their influence on its gasification and combustion were studied using an integrated system of a biomass gasifier and a combustor with swirl-enhanced stabilization of the flame reaction zone. The results show that the mw pre-processing of biomass pellets provides a faster weight loss at the gasification, and, therefore, faster ignition and combustion of the activated pellets along with increased output of heat energy at their burnout

Effect of Microwave Pre-Processing of Pelletized Biomass on its Gasification and Combustion / Mikroviļnu Priekšapstrādes Ietekme Uz Granulētas Biomasas Gazifikācijas Un Degšanas Procesiem

Institute of Physics, University of Latvia, 32 Miera Str., Salaspils, LV-2169, LATVIA

Latvian Institute of Wood Chemistry, 27 Dzerbenes Str., Riga, LV-1006, LATVIA

Latvian Journal of Physics and Technical Sciences

To effectively produce clean heat energy from biomass, microwave (mw) pre-processing of its different types - pelletized wood (spruce), herbaceous biomass...

Effect of Microwave Pre-Processing of Pelletized Biomass on its Gasification and Combustion / Mikroviļnu Priekšapstrādes Ietekme Uz Granulētas Biomasas Gazifikācijas Un Degšanas Procesiem

Publié en ligne: 17 sept. 2013

Pages: 34 - 47

DOI: https://doi.org/10.2478/lpts-2013-0024

This content is open access.