<abstract xmlns="http://www.w3.org/1999/xhtml"><p>For achieving a long service life of stamping dies for new types of steel sheets intended for the automotive industry, the tribosystem must be optimally designed. One of the possible solutions is its optimization by coatings. More modern coating technologies for stamping dies include PVD (physical vapor deposition) and CVD (chemical vapor deposition) methods. The properties of PVD TiCN and DLC (diamond-like carbon) coatings deposited on ledeburitic high-alloy Cr–Mo–V steel were analyzed by standard tests (coating adhesion by both the scratch and Rockwell C tests, microhardness by Vickers method and coating thickness by Calotest) and developed tribo-meter of the “friction jaw-roller” type at drawing double-sided hot-dip galvanized steel sheet. The obtained results showed better tribological behavior of the DLC coating.</p></abstract>

For achieving a long service life of stamping dies for new types of steel sheets intended for the automotive industry, the tribosystem must be optimally designed. One of the possible solutions is its optimization by coatings. More modern coating technologies for stamping dies include PVD (physical vapor deposition) and CVD (chemical vapor deposition) methods. The properties of PVD TiCN and DLC (diamond-like carbon) coatings deposited on ledeburitic high-alloy Cr–Mo–V steel were analyzed by standard tests (coating adhesion by both the scratch and Rockwell C tests, microhardness by Vickers method and coating thickness by Calotest) and developed tribo-meter of the “friction jaw-roller” type at drawing double-sided hot-dip galvanized steel sheet. The obtained results showed better tribological behavior of the DLC coating.

Evaluation of selected properties of coatings in respect of risk elimination of surface damage of stamped parts

Ústav materiálového výskumu SAV, Košice

KOM – Corrosion and Material Protection Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

For achieving a long service life of stamping dies for new types of steel sheets intended for the automotive industry, the tribosystem must be optimally...

Evaluation of selected properties of coatings in respect of risk elimination of surface damage of stamped parts

Publié en ligne: 24 janv. 2020

Pages: 159 - 166

DOI: https://doi.org/10.2478/kom-2019-0021

© 2019 Tkáčová J. et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.