<abstract xmlns="http://www.w3.org/1999/xhtml">
<p>This study initially examines the various sources of flow resistance in sand-bed (lowland) and gravel-bed (mountainous) rivers along with the limitations of traditional estimation methods. The nondimensional hydraulic geometry approach, relating dimensionless flow discharge (<italic>q</italic><sup>*</sup>) to the Darcy-Weisbach friction factor (<italic>f</italic>), has demonstrated good performance for both river types, covering shallow to moderately deep flows. However, accuracy in estimating <italic>f</italic> is affected by simplifications like assuming uniform and deep flow, neglecting bed load transport and vegetation effects, which require further evaluation. To address these issues, the proposed method is evaluated using data from four sand-bed rivers in Slovakia (with vegetation), and three gravel-bed rivers in Iran (dominated by cobbles and boulders). Bedforms prove to be significant resistance sources in all studied rivers. The approach yields separate predictors for each river type, showing a satisfactory agreement between observed and calculated values within a maximum deviation of ±20% error bands. These predictors are further validated using field data and established equations from rivers with similar physiographic characteristics. Results indicate the method performs well in predicting flow resistance in sand-bed rivers, slightly overestimating overall (+40%). It effectively captures riverbed features and vegetation influence under small-scale roughness conditions. However, the predictor’s validity for gravel-bed rivers is somewhat limited due to high variability in water-surface profiles, making it challenging to accurately capture flow dynamics under large-scale roughness conditions. Addressing complex characteristics of gravel-bed riverbeds, including boulders and local energy extraction, is crucial for improving the estimation of water-surface profile variations and flow resistance using the hydraulic geometry approach.</p>
</abstract>

This study initially examines the various sources of flow resistance in sand-bed (lowland) and gravel-bed (mountainous) rivers along with the limitations of traditional estimation methods. The nondimensional hydraulic geometry approach, relating dimensionless flow discharge (q*) to the Darcy-Weisbach friction factor (f), has demonstrated good performance for both river types, covering shallow to moderately deep flows. However, accuracy in estimating f is affected by simplifications like assuming uniform and deep flow, neglecting bed load transport and vegetation effects, which require further evaluation. To address these issues, the proposed method is evaluated using data from four sand-bed rivers in Slovakia (with vegetation), and three gravel-bed rivers in Iran (dominated by cobbles and boulders). Bedforms prove to be significant resistance sources in all studied rivers. The approach yields separate predictors for each river type, showing a satisfactory agreement between observed and calculated values within a maximum deviation of ±20% error bands. These predictors are further validated using field data and established equations from rivers with similar physiographic characteristics. Results indicate the method performs well in predicting flow resistance in sand-bed rivers, slightly overestimating overall (+40%). It effectively captures riverbed features and vegetation influence under small-scale roughness conditions. However, the predictor’s validity for gravel-bed rivers is somewhat limited due to high variability in water-surface profiles, making it challenging to accurately capture flow dynamics under large-scale roughness conditions. Addressing complex characteristics of gravel-bed riverbeds, including boulders and local energy extraction, is crucial for improving the estimation of water-surface profile variations and flow resistance using the hydraulic geometry approach.

Flow resistance at lowland and mountainous rivers

Institute of Hydrology, Slovak Academy of Sciences

Departamento de Engenharia Civil, Faculdadede Engenharia

Universidade do Porto, Rua Dr. Roberto Frias

Department of Civil Engineering, Iran University of Science and Technology

Journal of Hydrology and Hydromechanics

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Flow resistance at lowland and mountainous rivers"}

This study initially examines the various sources of flow resistance in sand-bed (lowland) and gravel-bed (mountainous) rivers along with the limitations of...

Flow resistance at lowland and mountainous rivers

Publié en ligne: 14 nov. 2023

Pages: 464 - 474

Reçu: 30 mars 2023

Accepté: 15 juin 2023

DOI: https://doi.org/10.2478/johh-2023-0023

Mots clés
Flow resistance, Hydraulic geometry, Gravel-bed river, Sand-bed river, Field data, River engineering.

© 2023 Saeid Okhravi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Flow resistance at lowland and mountainous rivers

Publié en ligne: 14 nov. 2023

Pages: 464 - 474

Reçu: 30 mars 2023

Accepté: 15 juin 2023

DOI: https://doi.org/10.2478/johh-2023-0023

Mots clésFlow resistance, Hydraulic geometry, Gravel-bed river, Sand-bed river, Field data, River engineering.

© 2023 Saeid Okhravi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
Flow resistance, Hydraulic geometry, Gravel-bed river, Sand-bed river, Field data, River engineering.