<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this paper, a novel design method for quad-band Wilkinson power dividers is proposed. The design method is based on using a quad-band microstrip line. In comparison with other design methods, the proposed method has the advantages of simplicity and low insertion loss. To validate the proposed method, an equal quad-band power divider operating at four bands of 0.7, 1.2, 1.78, and 2.28 GHz was simulated and measured. Good agreement between measured results and simulated ones is obtained. The measured results show that the developed quad-band power divider features low insertion loss of less than 0.75 dB, isolation greater than 20.92 dB, and return loss better than 18 dB at four operating bands.</p>
</abstract>

In this paper, a novel design method for quad-band Wilkinson power dividers is proposed. The design method is based on using a quad-band microstrip line. In comparison with other design methods, the proposed method has the advantages of simplicity and low insertion loss. To validate the proposed method, an equal quad-band power divider operating at four bands of 0.7, 1.2, 1.78, and 2.28 GHz was simulated and measured. Good agreement between measured results and simulated ones is obtained. The measured results show that the developed quad-band power divider features low insertion loss of less than 0.75 dB, isolation greater than 20.92 dB, and return loss better than 18 dB at four operating bands.

A simple design of low-loss quad-band Wilkinson power dividers

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"A simple design of low-loss quad-band Wilkinson power dividers"}

In this paper, a novel design method for quad-band Wilkinson power dividers is proposed. The design method is based on using a quad-band microstrip line. In...

A simple design of low-loss quad-band Wilkinson power dividers

Publié en ligne: 10 févr. 2024

Pages: 63 - 71

Reçu: 04 déc. 2023

DOI: https://doi.org/10.2478/jee-2024-0009

Mots clés
Wilkinson power divider, low-loss, multiband, quad-band, microstrip coupler

© 2024 Nguyen Minh Giang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

A simple design of low-loss quad-band Wilkinson power dividers

Publié en ligne: 10 févr. 2024

Pages: 63 - 71

Reçu: 04 déc. 2023

DOI: https://doi.org/10.2478/jee-2024-0009

Mots clésWilkinson power divider, low-loss, multiband, quad-band, microstrip coupler

© 2024 Nguyen Minh Giang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
Wilkinson power divider, low-loss, multiband, quad-band, microstrip coupler