<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper presents a compact implantable antenna’s design, fabrication, and measurement for biotelemetry applications. The proposed design with the size of 255 mm<sup>3</sup> provides a triple-band operation that covers all the Medical Implant Communication Service (MICS: 402 MHz), Medical Device Radiocommunications Service (MedRadio: 405 MHz), and Industrial, Scientific, and Medical (ISM: 433, 915 and 2450 MHz) bands simultaneously. The compact structure with triple- band performance is essentially achieved by using a spiral-like radiator loaded with meandered and internal gear-shaped elements excited by a vertical coaxial probe feed. Also, the slots-loaded partial ground plane is utilized to improve impedance matching at the desired frequency bands. The design and analysis of the antenna were carried out using the Ansoft HFSS software in a homogenous skin model and the CST Microwave Studio in a realistic human model. The proposed antenna was fabricated to validate the simulated results, and characteristics of its return loss and radiation patterns were measured in minced pork meat. Moreover, realized gains and specific absorption rate (SAR) values of the antenna were numerically computed using the simulators. Based on the simulated and measured results, the proposed antenna performance was found to be comparable to the limited number of multiband implantable antenna designs reported in the recent literature.</p>
</abstract>

This paper presents a compact implantable antenna’s design, fabrication, and measurement for biotelemetry applications. The proposed design with the size of 255 mm3 provides a triple-band operation that covers all the Medical Implant Communication Service (MICS: 402 MHz), Medical Device Radiocommunications Service (MedRadio: 405 MHz), and Industrial, Scientific, and Medical (ISM: 433, 915 and 2450 MHz) bands simultaneously. The compact structure with triple- band performance is essentially achieved by using a spiral-like radiator loaded with meandered and internal gear-shaped elements excited by a vertical coaxial probe feed. Also, the slots-loaded partial ground plane is utilized to improve impedance matching at the desired frequency bands. The design and analysis of the antenna were carried out using the Ansoft HFSS software in a homogenous skin model and the CST Microwave Studio in a realistic human model. The proposed antenna was fabricated to validate the simulated results, and characteristics of its return loss and radiation patterns were measured in minced pork meat. Moreover, realized gains and specific absorption rate (SAR) values of the antenna were numerically computed using the simulators. Based on the simulated and measured results, the proposed antenna performance was found to be comparable to the limited number of multiband implantable antenna designs reported in the recent literature.

Compact triple-band implantable antenna for multitasking medical devices

Department of Electronics and Communications Engineering

Department of Electrical-Electronics Engineering

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Compact triple-band implantable antenna for multitasking medical devices"}

This paper presents a compact implantable antenna’s design, fabrication, and measurement for biotelemetry applications. The proposed design with the size of...

Compact triple-band implantable antenna for multitasking medical devices

Publié en ligne: 11 juil. 2022

Pages: 166 - 173

Reçu: 20 mars 2022

DOI: https://doi.org/10.2478/jee-2022-0022

Mots clés
biotelemetry applications, implantable antennas, ISM bands, MedRadio bands, triple-band antennas

© 2022 Ömer Faruk Çelik et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Compact triple-band implantable antenna for multitasking medical devices

Publié en ligne: 11 juil. 2022

Pages: 166 - 173

Reçu: 20 mars 2022

DOI: https://doi.org/10.2478/jee-2022-0022

Mots clésbiotelemetry applications, implantable antennas, ISM bands, MedRadio bands, triple-band antennas

© 2022 Ömer Faruk Çelik et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
biotelemetry applications, implantable antennas, ISM bands, MedRadio bands, triple-band antennas