<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Telemetry data is the important data for the ground station to obtain the working status and environmental parameters of the aircraft system. Its fusion processing is the key technology to select the best selection of multiple channels of data and improve the reliability and accuracy of the entire recording. Due to the large amount of telemetry data, there is a delay error in the transmission process, and the phenomenon of frame loss and code error is accompanied by severe challenges for the alignment and optimization of data fusion. The research starts from the application background of fusion technology, introduces and analyzes the characteristics of telemetry data and the difficulties of fusion technology; outlines the current alignment and optimization related research results and development process, according to engineering requirements and technical points, from real-time and after-event From the perspective, the alignment algorithms and quality evaluation algorithms involved are classified and analyzed in detail; finally, the shortcomings of the existing methods are summarized, and the future development direction is looked forward to provide references for related researchers.</p>
</abstract>

Telemetry data is the important data for the ground station to obtain the working status and environmental parameters of the aircraft system. Its fusion processing is the key technology to select the best selection of multiple channels of data and improve the reliability and accuracy of the entire recording. Due to the large amount of telemetry data, there is a delay error in the transmission process, and the phenomenon of frame loss and code error is accompanied by severe challenges for the alignment and optimization of data fusion. The research starts from the application background of fusion technology, introduces and analyzes the characteristics of telemetry data and the difficulties of fusion technology; outlines the current alignment and optimization related research results and development process, according to engineering requirements and technical points, from real-time and after-event From the perspective, the alignment algorithms and quality evaluation algorithms involved are classified and analyzed in detail; finally, the shortcomings of the existing methods are summarized, and the future development direction is looked forward to provide references for related researchers.

Research on Real-Time Fusion Technology of Range Telemetry Data

Information Technology Center of Xi'an Technological University

International Journal of Advanced Network, Monitoring and Controls

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Research on Real-Time Fusion Technology of Range Telemetry Data"}

Telemetry data is the important data for the ground station to obtain the working status and environmental parameters of the aircraft system. Its fusion...

Research on Real-Time Fusion Technology of Range Telemetry Data

Publié en ligne: 28 mai 2023

Pages: 132 - 149

DOI: https://doi.org/10.2478/ijanmc-2022-0010

Mots clés
Telemetry Data, Data Fusion, Alignment, Optimization

© 2022 Hanghang Zhou et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Research on Real-Time Fusion Technology of Range Telemetry Data

Publié en ligne: 28 mai 2023

Pages: 132 - 149

DOI: https://doi.org/10.2478/ijanmc-2022-0010

Mots clésTelemetry Data, Data Fusion, Alignment, Optimization

© 2022 Hanghang Zhou et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
Telemetry Data, Data Fusion, Alignment, Optimization