Morpho-molecular identification of the bark beetle Hylesinus macmahoni (Stebbing, 1909) (Coleoptera: Curculionidae: Scolytinae) infesting Olea europaea subsp. cuspidata (Wall. & G.Don) Cif., along with a brief biological synopsis

During the survey of various host trees in 2018–2019, the bark beetle H. macmahoni was collected from the olive nurseries located in Salamabad (34° 05.186′ N and 074° 01.765′ E) and Govindpora (33° 07.053′ N and 075° 18.967′ E) regions of Jammu and Kashmir (Fig. 1). The host trees showed positive signs of Hylesinus infestation (emergence holes and frass coming out of the active gallery systems) on both the live trees as well as the pruned logs. The infested branches were examined, and the adult forms were collected after debarking the galleries. The specimens were then preserved in ethanol (96%) for subsequent taxonomic treatment.

Figure 1.

For identification, we follow the nomenclature used by Wood and Bright (1992) as well as later taxonomic and systematic adjustments (e.g. Maiti and Saha 2009; Knížek 2011; Bright 2021). Then, the specimens were morphologically examined under a Leica M205A Stereozoom microscope (Leica Microsystems GmbH, Wetzlar, Germany). The images were taken with a Leica DFC295 camera attached to the microscope and having LAS Montage Multifocus Software (version 4.10). Measurements of the specimens were also taken using Leica Automontage Software. The specimens are deposited in the Museum, Department of Zoology, University of Kashmir, Srinagar and some specimens are deposited in Milos Knížek Collection, Prague.

The samples for DNA extraction were preserved in extra pure (96%) ethanol and stored at −20°C. Adult specimens were carefully crushed and DNA was extracted using Nucleospin Insect DNA kit (Macherey-Nagel, Düren, Germany) following the manufacturer's protocol. The amplification of the DNA was carried out in 25μl reactions containing 5μl Q5 reaction buffer, 0.5μl deoxynucleoside triphosphates (dNTPs), 0.5μl of each primer: LCO-1490 5′-GGTCAACAAATCATAAAGATATTGG-3′ (forward) and HCO-2198 5′-TAAACTTCAGGGTGACCAAAAAATCA-3′ (reverse) (Folmer et al. 1994), 3μl of template DNA, 0.25μl Q5 high-fidelity DNA polymerase, 5μl Q5 high GC enhancer and 10.25μl of nuclease-free water. The amplifications were carried out with an initial denaturation step of one cycle of 2 min at 95°C, 35 cycles for 20 sec at 95°C, 40 sec at 52°C, 2 min at 72°C and a final elongation cycle of 10 min at 72°C. The amplified products were separated on 2% agarose stained with ethidium bromide and visualised using a UV trans-illuminator. The sequence reactions were performed in both directions on a thermal cycler using Applied Biosystems BigDye Terminator V3.1 Cycle sequencing kit. The sequencing products were loaded on Applied Biosystems 3130 Genetic Analyser at GeneOmbio Technologies Pvt. Ltd. (Pune, India). The sequences of the haplotypes derived from this study were deposited in the Gene Bank with accession numbers: MW715433 H. macmahoni HT-1 and MW715434 H. macmahoni HT-2.

The DNA sequence alignment (for cytochrome oxidase subunit I [COI] genes) was performed by ClustalX (Thompson et al. 1997) using default setting. Distance analysis and construction of trees were performed by the Neighbor-Joining (NJ) algorithm (Saitu and Nei 1987) as it is implemented in the MEGA-11 (Tamura et al. 2021). For comparison, the GenBank entries of desired Scolytine species including outgroup were taken in the analyses.

To study the biological parameters, the branches infested with H. macmahoni were cut into logs of specific size range (30–40 cm length and 8–10 cm in diameter). The logs were then brought to the rearing laboratory and placed in rearing boxes of similar design with dimensions of 70 × 30 × 35 cm and 40 × 30 × 30 cm, made up of glass fitted with a muslin cloth on their top end. To maintain the culture, some fresh branches (30–40 cm long and 8–10 cm in diameter) were placed with the naturally infested branches inside the rearing boxes as soon as the adults started emerging. The fresh branches at their cut ends were sealed with wax. The mating system, gallery pattern and the number of generations were recorded.

Frons somewhat flat and feebly impressed above epistomal margin; surface finely reticulate, with close punctures of irregular shape and size and dense stout setae, except on median smooth, impunctate area; vertex convex, finely reticulate and with minute punctures; eyes elongate and entire; antennal scape long, funicle with seven segments, club conical with three distinct sutures; pronotum 1.5 times as wide as long, widest at base, lateral sides rounded and gradually incurved from the base, with distinct antero-lateral constriction; anterior margin sub-rounded; surface rugosely punctate, punctures more prominent, shallow and irregular towards the basal half; asperities of different sizes on the lateral margins more prominent anteriorly; scale-like setae on the pronotal surface, somewhat longer laterally and recumbent towards the basal margin; elytra two times as long as pronotum, lateral sides sub parallel on basal two-fifths, gradually narrowing posteriorly with broadly rounded apex; basal margin each with 12–13 transverse crenulations; striae impressed and narrow with somewhat indistinct punctures; interstriae much wider than striae; interstrial vestiture with three to four rows of scale-like setae, scales blunt at the apex; pale scales form a wide band from the postero-lateral part of elytra to scutellum, with a further pale area on elytral declivity; rows of tuberculations visible on interstriae more prominent towards the elytral base; declivity convex, moderately steep with second interstriae somewhat depressed; colour blackish brown; body length 2.9 mm. Males are distinct from females in having broadly impressed frons.

Figure 2.

Figure 3.

Figure 4.

Remarks: H. macmahoni is very similar to H. tupolevi Stark, 1936 in the elytral colouration, but the setae on the elytra in H. tupolevi are rather sharply pointed and in H. macmahoni, the setae are blunt. The species is also very similar to H. cingulatus Blandford 1894, but differs from it again mainly in the elytral setae, which are very short, somewhat rounded and blunt in H. cingulatus.

Syntypes in F.R.I. Dehradun

New records: India: Kashmir, Baramulla, Salamabad (34° 05.186′ N, 074° 01.765′ E, 4415 ft.), A.A. Buhroo, 30.09.2017 (KUIC). Jammu, Ramban, Govindpora (33° 07.053′ N, 075° 18.967′ E, 5420 ft.), A.A. Buhroo and R.M. Zubair, 10.05.2018 (KUIC)

India: Jammu and Kashmir

Fraxinus excelsior, F. floribunda, Olea europaea subsp. cuspidata

Phylogenetic analysis of H. macmahoni, H. varius (Fabricius, 1775), H. crenatus (Fabricius, 1787), H. fraxini Panzer, 1799 and H. wachtli orni Fuchs, 1906, along with the out-group Hylurgus ligniperda (Fabricius, 1787) resulted in the formation of clades having bootstrap values greater than 90% (Fig. 5). H. macmahoni was separately monophyletic within the group with well-supported sister clades, and its haplotypes were displayed in a single clade with high bootstrap values (100%). The nucleotide difference between the haplotypes of H. macmahoni was 2.2% (Table 1). The interspecific nucleotide divergence was evident and well above the set criteria (6.1%) for Ips sister species (Cognato and Sun 2007). It ranged 13.1%–13.8% between H. macmahoni and H. varius, 12.3%–14.6% between H. macmahoni and H. wachtli and 14.7%–16% between H. macmahoni and H. crenatus. The earlier systematic adjustments (Knížek 2011, Bright 2021) have put H. fraxini under the synonymy of H. varius. However, the consensus tree also showed that H. varius and H. fraxini formed one clade with 100% bootstrap values, which also supports their synonymy being morphologically similar species.

Figure 5.

H. macmahoni excavates a characteristic transverse mother gallery in the phloem and sapwood under the bark. Because of polygamous mating system, the mother galleries are mostly bi-armed, unequal in length and run opposite to each other on the two sides of nuptial chamber (Fig. 6). The adjacent mother galleries run parallel to one another and are evenly spaced. The length of the mother gallery ranged from 2.7 to 8 cm with a mean of 5.61 (±1.87 standard deviation [SD]) cm (Tab. 2). The larval mines were around 50–55 in number radiating from both margins of the mother gallery. They were wavy and completely separated, running up and down, with the middle ones being straight while the outer ones radiated straight at first and then bent outwards, away from the mother gallery. The larval mines measured 4.4–7.0 cm in length with a mean of 5.25 (±0.74 SD) cm, with increasing dimensions as they moved away. The adults emerged through the exit holes, forming a specific pattern on the bark surface and leaving a characteristic impression in the inner bark specific to a species.

Figure 6.

The female locates a suitable host tree and then bores into the bark, excavating a small depression called as nuptial chamber meant for mating. This was evident by the presence of females in most of the newly constructed galleries containing solitary individuals. The female then girdles out transverse single- or double-armed mother gallery (Fig. 6). Single-armed galleries were few, and majority of the galleries were bi-armed with unequal length of the arms; probably, these gallery systems are initially the work of a single female to which the secondarily arriving male later attracts the second female, resulting in two-armed gallery with equal or unequal arm lengths. About 55 (±5 SD, n = 10) eggs were deposited at regular intervals in small individual niches along the whole length on both sides of the mother gallery. After hatching out from the eggs, the larvae ate out distinct wavy and completely separated mines, running up and down, the middle ones straight while the outer ones radiated straight at first and then bent outwards. The larval mines ended up in pupal chambers, where adults matured and finally emerged straight through the exit holes, forming a specific pattern on the bark surface.

During the field surveys and laboratory observations, it was found (Fig. 7) that this species overwintered in larval and pupal stages inside the galleries from the last week of October onwards. The overwintering generation resumed its activity in spring of the following year from the first week of March onwards. The first swarming adults appeared from the first week of April. The adults again searched fresh and suitable trees to continue the life cycle. The second swarming of adults emerged in the later part of June. Emergence of adults was again seen in September of the year. This showed that there were two complete and a third partial generation per year in Jammu and Kashmir.

Figure 7.