<abstract xmlns="http://www.w3.org/1999/xhtml"> The long-term performance of a structural member is determined by its durability and deformation with time. The bending creep behaviour of modified wood was assessed experimentally over a period of 35 days (840 hours). Four chemical modification processes were used: 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU), mmethylated melamine formaldehyde resin (MMF), tetraethoxysilane (TEOS) and amid wax (WA). Wood stakes with 20.10.200 mm RTL dimensions of Portuguese Maritime pine (Pinus pinaster Ait.) from sapwood part of the stem were used for evaluated the primary creep. Experiments were conducted at bending stresses amounting to 0.1, 0.2, 0.4 of the mean immediate wood bending strength obtained at equilibrium moisture content (EMC). Applying the same stress level (SL, 0.2), wood creep was also determined at the constant low and high moisture content. As results: Between low and medium SL (8 and 16 N/mm2), unmodified wood at indoors conditions did not show any effect in the creep factors (kc). However, at high SL (35 N/mm2) a slight increase (not significant) in the kc was found. It seems that the kc was nearly independent of the SL. In the lumen fill modification (TEOS and wax), the deposited material has not affected the creep behaviour under various SL. The cell wall modification (with DMDHEU and MMF resins) did not show any differences in the kc for low and medium SL (8 and 16 N/mm2). However, resin modification under high SL (35 N/mm2) has shown a significant reduction related to unmodified wood. Between both types of resin (DMDHEU and MMF) and levels of modification (WPG), significant effect was not found. At saturated conditions, lumen fill modification (TEOS and wax) did not show any effect on creep. In the cell wall modification (DMDHEU and MMF resin), significant reduction was recorded due to the embrittlement effect imparted by the modification (deposit of resin in the cell wall).</abstract>

The long-term performance of a structural member is determined by its durability and deformation with time. The bending creep behaviour of modified wood was assessed experimentally over a period of 35 days (840 hours). Four chemical modification processes were used: 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU), mmethylated melamine formaldehyde resin (MMF), tetraethoxysilane (TEOS) and amid wax (WA). Wood stakes with 20.10.200 mm RTL dimensions of Portuguese Maritime pine (Pinus pinaster Ait.) from sapwood part of the stem were used for evaluated the primary creep. Experiments were conducted at bending stresses amounting to 0.1, 0.2, 0.4 of the mean immediate wood bending strength obtained at equilibrium moisture content (EMC). Applying the same stress level (SL, 0.2), wood creep was also determined at the constant low and high moisture content. As results: Between low and medium SL (8 and 16 N/mm2), unmodified wood at indoors conditions did not show any effect in the creep factors (kc). However, at high SL (35 N/mm2) a slight increase (not significant) in the kc was found. It seems that the kc was nearly independent of the SL. In the lumen fill modification (TEOS and wax), the deposited material has not affected the creep behaviour under various SL. The cell wall modification (with DMDHEU and MMF resins) did not show any differences in the kc for low and medium SL (8 and 16 N/mm2). However, resin modification under high SL (35 N/mm2) has shown a significant reduction related to unmodified wood. Between both types of resin (DMDHEU and MMF) and levels of modification (WPG), significant effect was not found. At saturated conditions, lumen fill modification (TEOS and wax) did not show any effect on creep. In the cell wall modification (DMDHEU and MMF resin), significant reduction was recorded due to the embrittlement effect imparted by the modification (deposit of resin in the cell wall).

Bending creep of Maritime pine wood (Pinus pinaster Ait.) chemically modified

School of Engineering – Polytechnic of Porto, Rua Dr. António Bernardino de Almeida 431, 4200-072 Porto, Portugal, phone: +351228340500, fax: +351228321159

Wood Biology and Wood Products, Büsgenweg 4 - 37077, Germany

Folia Forestalia Polonica

{"article-title":"Bending creep of Maritime pine wood (Pinus pinaster Ait.) chemically modified"}

The long-term performance of a structural member is determined by its durability and deformation with time. The bending creep behaviour of modified wood was...

Bending creep of Maritime pine wood (Pinus pinaster Ait.) chemically modified

Publié en ligne: 31 déc. 2013

Pages: 120 - 131

DOI: https://doi.org/10.2478/ffp-2013-00013

Mots clés
chemical modification, creep factor, indoor climate, saturated conditions

This content is open access.

Bending creep of Maritime pine wood (Pinus pinaster Ait.) chemically modified

Publié en ligne: 31 déc. 2013

Pages: 120 - 131

DOI: https://doi.org/10.2478/ffp-2013-00013

Mots cléschemical modification, creep factor, indoor climate, saturated conditions

This content is open access.

Mots clés
chemical modification, creep factor, indoor climate, saturated conditions