This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Bachmatiuk, A. (2008). Badania nad technologią otrzymywania i właściwościami nanorurek węglowych [Unpublished doctoral dissertation]. Politechnika Szczecińska, Wydział technologii i Inżynierii Chemicznej.BachmatiukA. (2008). [Unpublished doctoral dissertation]. Politechnika Szczecińska, Wydział technologii i Inżynierii Chemicznej.Search in Google Scholar
Bakar Sulong, A., Muhamad, N., Sahari, J., Ramli, R., Md Deros, B., & Park, J. (2009). Electrical Conductivity Behaviour of Chemical Functionalized MWCNTs Epoxy Nanocomposites. European Journal of Scientific Research, 29(1), 13–21.Bakar SulongA.MuhamadN.SahariJ.RamliR.Md DerosB.ParkJ. (2009). Electrical Conductivity Behaviour of Chemical Functionalized MWCNTs Epoxy Nanocomposites. , 29(1), 13–21.Search in Google Scholar
Barros, E. B., Jorio, A., Samsonidze, G. G., Capaz, R. B., Souza Filho, A. G., Mendes Filho, J., Dresselhaus, G., & Dresselhaus, M. S. (2006). Review on the symmetry-related properties of carbon nanotubes. Physics Reports, 431(6), 261–302.BarrosE. B.JorioA.SamsonidzeG. G.CapazR. B.Souza FilhoA. G.Mendes FilhoJ.DresselhausG.DresselhausM. S. (2006). Review on the symmetry-related properties of carbon nanotubes. , 431(6), 261–302.Search in Google Scholar
Baughman, R. H., Shacklette, J. M., Zakhidov, A. A., & Stafström, S. (1998). Negative Poisson’s ratios as a common feature of cubic metals. Nature, 392(6674), 362–365.BaughmanR. H.ShackletteJ. M.ZakhidovA. A.StafströmS. (1998). Negative Poisson’s ratios as a common feature of cubic metals. , 392(6674), 362–365.Search in Google Scholar
Bielanski, A. (1980). Chemia Fizyczna. Państwowe Wydawnictwo Naukowe PWN.BielanskiA. (1980). . Państwowe Wydawnictwo Naukowe PWN.Search in Google Scholar
Borowiak-Palen, E., Pichler, T., Liu, X., Knupfer, M., Graff, A., Jost, O., Pompe, W., Kalenczuk, R. J., & Fink, J. (2002). Reduced diameter distribution of single-wall carbon nanotubes by selective oxidation. Chemical Physics Letters, 363(5-6), 567–572.Borowiak-PalenE.PichlerT.LiuX.KnupferM.GraffA.JostO.PompeW.KalenczukR. J.FinkJ. (2002). Reduced diameter distribution of single-wall carbon nanotubes by selective oxidation. , 363(5-6), 567–572.Search in Google Scholar
Cardona-Uribe, N., Betancur, M., & Martínez, J. D. (2021). Towards the chemical upgrading of the recovered carbon black derived from pyrolysis of end-of-life tires. Sustainable Materials and Technologies, 28, Article e00287.Cardona-UribeN.BetancurM.MartínezJ. D. (2021). Towards the chemical upgrading of the recovered carbon black derived from pyrolysis of end-of-life tires. , 28, Article e00287.Search in Google Scholar
Ciecierska, E., Boczkowska, A., Chabera, P., Wisniewski, T., & Kubiś, M. (2015). Epoxy composites with carbon fillers. Structure and properties Kompozyty żywicy epoksydowej z napełniaczami węglowymi. Struktura i właściwości. Przemysł Chemiczny, 1(11), 159–163.CiecierskaE.BoczkowskaA.ChaberaP.WisniewskiT.KubiśM. (2015). Epoxy composites with carbon fillers. Structure and properties Kompozyty żywicy epoksydowej z napełniaczami węglowymi. Struktura i właściwości. , 1(11), 159–163.Search in Google Scholar
Domun, N., Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G. H., & Vahid, S. (2015). Improving the fracture toughness and the strength of epoxy using nanomaterials – a review of the current status. Nanoscale, 7(23), 10294–10329.DomunN.HadaviniaH.ZhangT.SainsburyT.LiaghatG. H.VahidS. (2015). Improving the fracture toughness and the strength of epoxy using nanomaterials – a review of the current status. , 7(23), 10294–10329.Search in Google Scholar
Dydek, K., Boczkowska, A., Kozera, R., Durałek, P., Sarniak, Ł., Wilk, M., & Login, W. (2021). Effect of SWCNT-Tuball Paper on the Lightning Strike Protection of CFRPs and Their Selected Mechanical Properties. Materials, 14(11), 3140.DydekK.BoczkowskaA.KozeraR.DurałekP.SarniakŁ.WilkM.LoginW. (2021). Effect of SWCNT-Tuball Paper on the Lightning Strike Protection of CFRPs and Their Selected Mechanical Properties. , 14(11), 3140.Search in Google Scholar
Frigione, M., Naddeo, C., & Acierno, D. (2001). Cold-Curing Epoxy Resins: Aging and Environmental Effects. I - Thermal Properties. Journal of Polymer Engineering, 21(1).FrigioneM.NaddeoC.AciernoD. (2001). Cold-Curing Epoxy Resins: Aging and Environmental Effects. I - Thermal Properties. , 21(1).Search in Google Scholar
Ganesh, M., Lavenya, K., Kirubashini, K., Ajeesh, G., Bhowmik, S., Epaarachchi, J., & Yuan, X. (2017). Electrically conductive nano adhesive bonding: Futuristic approach for satellites and electromagnetic interference shielding. Advances in Aircraft and Spacecraft Science, 4(6), 729–744.GaneshM.LavenyaK.KirubashiniK.AjeeshG.BhowmikS.EpaarachchiJ.YuanX. (2017). Electrically conductive nano adhesive bonding: Futuristic approach for satellites and electromagnetic interference shielding. , 4(6), 729–744.Search in Google Scholar
Gardea, F., & Lagoudas, D. C. (2014). Characterization of electrical and thermal properties of carbon nanotube/epoxy composites. Composites Part B: Engineering, 56, 611–620.GardeaF.LagoudasD. C. (2014). Characterization of electrical and thermal properties of carbon nanotube/epoxy composites. , 56, 611–620.Search in Google Scholar
Geipel, T., Meinert, M., Kraft, A., & Eitner, U. (2018). Optimization of Electrically Conductive Adhesive Bonds in Photovoltaic Modules. IEEE Journal of Photovoltaics, 8(4), 1074–1081.GeipelT.MeinertM.KraftA.EitnerU. (2018). Optimization of Electrically Conductive Adhesive Bonds in Photovoltaic Modules. , 8(4), 1074–1081.Search in Google Scholar
Gogurla, N., Roy, B., Park, J.-Y., & Kim, S. (2019). Skin-contact actuated singleelectrode protein triboelectric nanogenerator and strain sensor for biomechanical energy harvesting and motion sensing. Nano Energy, 62, 674–681.GogurlaN.RoyB.ParkJ.-Y.KimS. (2019). Skin-contact actuated singleelectrode protein triboelectric nanogenerator and strain sensor for biomechanical energy harvesting and motion sensing. , 62, 674–681.Search in Google Scholar
Gojny, F. H., Wichmann, M. H. G., Köpke, U., Fiedler, B., & Schulte, K. (2004). Carbon nanotube-reinforced epoxy-composites: Enhanced stiffness and fracture toughness at low nanotube content. Composites Science and Technology, 64(15), 2363–2371.GojnyF. H.WichmannM. H. G.KöpkeU.FiedlerB.SchulteK. (2004). Carbon nanotube-reinforced epoxy-composites: Enhanced stiffness and fracture toughness at low nanotube content. , 64(15), 2363–2371.Search in Google Scholar
Hagita, K., & Morita, H. (2019). Effects of polymer/filler interactions on glass transition temperatures of filler-filled polymer nanocomposites. Polymer, 178, 121615.HagitaK.MoritaH. (2019). Effects of polymer/filler interactions on glass transition temperatures of filler-filled polymer nanocomposites. , 178, 121615.Search in Google Scholar
Hall, L. J., Coluci, V. R., Galvao, D. S., Kozlov, M. E., Zhang, M., Dantas, S. O., & Baughman, R. H. (2008). Sign Change of Poisson’s Ratio for Carbon Nanotube Sheets. Science, 320(5875), 504–507.HallL. J.ColuciV. R.GalvaoD. S.KozlovM. E.ZhangM.DantasS. O.BaughmanR. H. (2008). Sign Change of Poisson’s Ratio for Carbon Nanotube Sheets. , 320(5875), 504–507.Search in Google Scholar
Huczko, A. (2004). Nanorurki Weglowe. Czarne diamenty XXI wieku. BEL STUDIO.HuczkoA. (2004). . BEL STUDIO.Search in Google Scholar
Iijima, S. (2002). Carbon nanotubes: past, present, and future. Physica B: Condensed Matter, 323(1-4), 1–5.IijimaS. (2002). Carbon nanotubes: past, present, and future. , 323(1-4), 1–5.Search in Google Scholar
Krainoi, A., Johns, J., Kalkornsurapranee, E., & Nakaramontri, Y. (2021). Carbon Nanotubes Reinforced Natural Rubber Composites. In P. Ghosh, K. Datta, & A. Rushi (Eds.), Carbon Nanotubes - Redefining the World of Electronics. IntechOpen.KrainoiA.JohnsJ.KalkornsurapraneeE.NakaramontriY. (2021). Carbon Nanotubes Reinforced Natural Rubber Composites. In GhoshP.DattaK.RushiA. (Eds.), . IntechOpen.Search in Google Scholar
Królikowski, W., & Rosłaniec, Z. (2004). Nanokompozyty polimerowe. Kompozyty, 4(9), 3–15.KrólikowskiW.RosłaniecZ. (2004). Nanokompozyty polimerowe. , 4(9), 3–15.Search in Google Scholar
Kumar, V., Alam, M. N., Manikkavel, A., Song, M., Lee, D.-J., & Park, S.-S. (2021). Silicone Rubber Composites Reinforced by Carbon Nanofillers and Their Hybrids for Various Applications: A Review. Polymers, 13(14), 2322.KumarV.AlamM. N.ManikkavelA.SongM.LeeD.-J.ParkS.-S. (2021). Silicone Rubber Composites Reinforced by Carbon Nanofillers and Their Hybrids for Various Applications: A Review. , 13(14), 2322.Search in Google Scholar
Kumar, V., Kumar, A., Han, S. S., & Park, S.-S. (2020). RTV silicone rubber composites reinforced with carbon nanotubes, titanium-di-oxide and their hybrid: Mechanical and piezoelectric actuation performance. Nano Materials Science.KumarV.KumarA.HanS. S.ParkS.-S. (2020). RTV silicone rubber composites reinforced with carbon nanotubes, titanium-di-oxide and their hybrid: Mechanical and piezoelectric actuation performance. .Search in Google Scholar
Kumar, V., Kumar, A., Song, M., Lee, D.-J., Han, S.-S., & Park, S.-S. (2021). Properties of Silicone Rubber-Based Composites Reinforced with Few-Layer Graphene and Iron Oxide or Titanium Dioxide. Polymers, 13(10), 1550.KumarV.KumarA.SongM.LeeD.-J.HanS.-S.ParkS.-S. (2021). Properties of Silicone Rubber-Based Composites Reinforced with Few-Layer Graphene and Iron Oxide or Titanium Dioxide. , 13(10), 1550.Search in Google Scholar
Kumar, V., & Lee, D.-J. (2016). Studies of nanocomposites based on carbon nanomaterials and RTV silicone rubber. Journal of Applied Polymer Science, 134(4).KumarV.LeeD.-J. (2016). Studies of nanocomposites based on carbon nanomaterials and RTV silicone rubber. , 134(4).Search in Google Scholar
Kumar, V., Lee, G., Monika, Choi, J., & Lee, D.-J. (2020). Studies on composites based on HTV and RTV silicone rubber and carbon nanotubes for sensors and actuators. Polymer, 190, 122221.KumarV.LeeG.MonikaChoiJ.LeeD.-J. (2020). Studies on composites based on HTV and RTV silicone rubber and carbon nanotubes for sensors and actuators. , 190, 122221.Search in Google Scholar
Lakes, R. (1987). Foam Structures with a Negative Poisson’s Ratio. Science, 235(4792), 1038–1040.LakesR. (1987). Foam Structures with a Negative Poisson’s Ratio. , 235(4792), 1038–1040.Search in Google Scholar
Latko-Durałek, P., Kozera, R., Macutkevič, J., Dydek, K., & Boczkowska, A. (2020). Relationship between Viscosity, Microstructure and Electrical Conductivity in Copolyamide Hot Melt Adhesives Containing Carbon Nanotubes. Materials, 13(20), 4469.Latko-DurałekP.KozeraR.MacutkevičJ.DydekK.BoczkowskaA. (2020). Relationship between Viscosity, Microstructure and Electrical Conductivity in Copolyamide Hot Melt Adhesives Containing Carbon Nanotubes. , 13(20), 4469.Search in Google Scholar
Lee, J.-Y., Kumar, V., Tang, X.-W., & Lee, D.-J. (2017). Mechanical and electrical behavior of rubber nanocomposites under static and cyclic strain. Composites Science and Technology, 142, 1–9.LeeJ.-Y.KumarV.TangX.-W.LeeD.-J. (2017). Mechanical and electrical behavior of rubber nanocomposites under static and cyclic strain. , 142, 1–9.Search in Google Scholar
Li, C., Chen, X., & Zhimin, D. (2004). A New Relationship of Rock Compressibility with Porosity. Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, October 2004.LiC.ChenX.ZhiminD. (2004). . Paper presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, October 2004.Search in Google Scholar
Limpert, E., & Stahel, W. A. (2011). Problems with Using the Normal Distribution – and Ways to Improve Quality and Efficiency of Data Analysis. PLoS ONE, 6(7), Article e21403.LimpertE.StahelW. A. (2011). Problems with Using the Normal Distribution – and Ways to Improve Quality and Efficiency of Data Analysis. , 6(7), Article e21403.Search in Google Scholar
Liu, Q., Lomov, S. V., & Gorbatikh, L. (2020). Enhancing Strength and Toughness of Hierarchical Composites through Optimization of Position and Orientation of Nanotubes: A Computational Study. Journal of Composites Science, 4(2), 34.LiuQ.LomovS. V.GorbatikhL. (2020). Enhancing Strength and Toughness of Hierarchical Composites through Optimization of Position and Orientation of Nanotubes: A Computational Study. , 4(2), 34.Search in Google Scholar
Liu, Q., Shi, W., Chen, Z., Li, K., Liu, H., & Li, S. (2019). Rubber accelerated ageing life prediction by Peck model considering initial hardness influence. Polymer Testing, 80, 106132.LiuQ.ShiW.ChenZ.LiK.LiuH.LiS. (2019). Rubber accelerated ageing life prediction by Peck model considering initial hardness influence. , 80, 106132.Search in Google Scholar
Lopes, P., Moura, D., Freitas, D., Proença, M., Figueiredo, R., Alves, H., & Paiva, M. (2019). Advanced electrically conductive adhesives for high complexity PCB assembly. AIP Conf. Proc. 22 January 2019, 2055(1), 090009.LopesP.MouraD.FreitasD.ProençaM.FigueiredoR.AlvesH.PaivaM. (2019). Advanced electrically conductive adhesives for high complexity PCB assembly. , 2055(1), 090009.Search in Google Scholar
Ma, P.-C., Mo, S.-Y., Tang, B.-Z., & Kim, J.-K. (2010). Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites. Carbon, 48(6), 1824–1834.MaP.-C.MoS.-Y.TangB.-Z.KimJ.-K. (2010). Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites. , 48(6), 1824–1834.Search in Google Scholar
Mucha, M., Krzyzak, A., Kosicka, E., Coy, E., Kościński, M., Sterzyński, T., & Sałaciński, M. (2020). Effect of MWCNTs on Wear Behavior of Epoxy Resin for Aircraft Applications. Materials, 13(12), 2696.MuchaM.KrzyzakA.KosickaE.CoyE.KościńskiM.SterzyńskiT.SałacińskiM. (2020). Effect of MWCNTs on Wear Behavior of Epoxy Resin for Aircraft Applications. , 13(12), 2696.Search in Google Scholar
Nicolau-Kuklińska, A., Latko-Durałek, P., Nakonieczna, P., Dydek, K., Boczkowska, A., & Grygorczuk, J. (2017). A new electroactive polymer based on carbon nanotubes and carbon grease as compliant electrodes for electroactive actuators. Journal of Intelligent Material Systems and Structures, 29(7), 1520–1530.Nicolau-KuklińskaA.Latko-DurałekP.NakoniecznaP.DydekK.BoczkowskaA.GrygorczukJ. (2017). A new electroactive polymer based on carbon nanotubes and carbon grease as compliant electrodes for electroactive actuators. , 29(7), 1520–1530.Search in Google Scholar
Nobile, M. R. (2011). Rheology of polymer–carbon nanotube composites melts. In T. McNally & P. Pötschke (Eds.), Polymer–Carbon Nanotube Composites (pp. 428–481). Woodhead Publishing.NobileM. R. (2011). Rheology of polymer–carbon nanotube composites melts. In McNallyT.PötschkeP. (Eds.), (pp. 428–481). Woodhead Publishing.Search in Google Scholar
Plagge, J., & Lang, A. (2021). Filler-polymer interaction investigated using graphitized carbon blacks: Another attempt to explain reinforcement. Polymer, 218, 123513.PlaggeJ.LangA. (2021). Filler-polymer interaction investigated using graphitized carbon blacks: Another attempt to explain reinforcement. , 218, 123513.Search in Google Scholar
Przygocki, W., & Włochowicz, A. (2001). Fulereny i nanorurki – Właściwosci i zastosowanie. Wydawnictwo Naukowo – Techniczne.PrzygockiW.WłochowiczA. (2001). . Wydawnictwo Naukowo – Techniczne.Search in Google Scholar
Rodríguez-Prieto, A., Primera, E., Frigione, M., & Camacho, A. M. (2021). Reliability Prediction of Acrylonitrile O-Ring for Nuclear Power Applications Based on Shore Hardness Measurements. Polymers, 13(6), 943.Rodríguez-PrietoA.PrimeraE.FrigioneM.CamachoA. M. (2021). Reliability Prediction of Acrylonitrile O-Ring for Nuclear Power Applications Based on Shore Hardness Measurements. , 13(6), 943.Search in Google Scholar
Rosca, I. D., & Hoa, S. V. (2009). Highly conductive multiwall carbon nanotube and epoxy composites produced by three-roll milling. Carbon, 47(8), 1958–1968.RoscaI. D.HoaS. V. (2009). Highly conductive multiwall carbon nanotube and epoxy composites produced by three-roll milling. , 47(8), 1958–1968.Search in Google Scholar
Sajith, S. (2019). Investigation on effect of chemical composition of bio-fillers on filler/matrix interaction and properties of particle reinforced composites using FTIR. Composites Part B: Engineering, 166, 21–30.SajithS. (2019). Investigation on effect of chemical composition of bio-fillers on filler/matrix interaction and properties of particle reinforced composites using FTIR. , 166, 21–30.Search in Google Scholar
Sivaselvi, K., Varma, V. S., Harikumar, A., Jayaprakash, A., Sankar, S., Krishna, C. Y., & Gopal, K. (2021). Improving the mechanical properties of natural rubber composite with carbon black (N220) as filler. Materials Today: Proceedings, 42, 921–925.SivaselviK.VarmaV. S.HarikumarA.JayaprakashA.SankarS.KrishnaC. Y.GopalK. (2021). Improving the mechanical properties of natural rubber composite with carbon black (N220) as filler. , 42, 921–925.Search in Google Scholar
Smoleń, P., Czujko, T., Komorek, Z., Grochala, D., Rutkowska, A., & Osiewicz-Powęzka, M. (2021). Mechanical and Electrical Properties of Epoxy Composites Modified by Functionalized Multiwalled Carbon Nanotubes. Materials, 14(12), 3325.SmoleńP.CzujkoT.KomorekZ.GrochalaD.RutkowskaA.Osiewicz-PowęzkaM. (2021). Mechanical and Electrical Properties of Epoxy Composites Modified by Functionalized Multiwalled Carbon Nanotubes. , 14(12), 3325.Search in Google Scholar
Terranova, M. L., Sessa, V., & Rossi, M. (2006). The World of Carbon Nanotubes: An Overview of CVD Growth Methodologies. Chemical Vapor Deposition, 12(6), 315–325.TerranovaM. L.SessaV.RossiM. (2006). The World of Carbon Nanotubes: An Overview of CVD Growth Methodologies. , 12(6), 315–325.Search in Google Scholar
Yadav, S. G., Guntur, N. P. R., N., R., & Gopalan, S. (2021). Effect of titanium carbide powder as a filler on the mechanical properties of silicone rubber. Materials Today: Proceedings, 46, 665–671.YadavS. G.GunturN. P. R.N., R.GopalanS. (2021). Effect of titanium carbide powder as a filler on the mechanical properties of silicone rubber. , 46, 665–671.Search in Google Scholar
Yang, H., Yao, X., Zheng, Z., Gong, L., Yuan, L., Yuan, Y., & Liu, Y. (2018). Highly sensitive and stretchable graphene-silicone rubber composites for strain sensing. Composites Science and Technology, 167, 371–378.YangH.YaoX.ZhengZ.GongL.YuanL.YuanY.LiuY. (2018). Highly sensitive and stretchable graphene-silicone rubber composites for strain sensing. , 167, 371–378.Search in Google Scholar
Yeganeh-Haeri, A., Weidner, D. J., & Parise, J. B. (1992). Elasticity of agr-Cristobalite: A Silicon Dioxide with a Negative Poisson’s Ratio. Science, 257(5070), 650–652.Yeganeh-HaeriA.WeidnerD. J.PariseJ. B. (1992). Elasticity of agr-Cristobalite: A Silicon Dioxide with a Negative Poisson’s Ratio. , 257(5070), 650–652.Search in Google Scholar
Zhang, X., Cai, L., He, A., Ma, H., Li, Y., Hu, Y., Zhang, X., & Liu, L. (2021). Facile strategies for green tire tread with enhanced filler-matrix interfacial interactions and dynamic mechanical properties. Composites Science and Technology, 203, 108601.ZhangX.CaiL.HeA.MaH.LiY.HuY.ZhangX.LiuL. (2021). Facile strategies for green tire tread with enhanced filler-matrix interfacial interactions and dynamic mechanical properties. , 203, 108601.Search in Google Scholar