This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.
Adner, R., & Kapoor, R. (2010). Value creation in innovation ecosystems: How the structure of technological interdependence affects firm performance in new technology generations. Strategic Management Journal 31(3), 306-333.AdnerR.&KapoorR.2010Value creation in innovation ecosystems: How the structure of technological interdependence affects firm performance in new technology generations313306–33310.1002/smj.821Search in Google Scholar
Alaeddin, O., Altounjy, R., Zainudin, Z., & Kamarudin, F. (2018). From physical to digital: investigating consumer behaviour of switching to mobile wallet. Polish Journal of Management Studies 17(2), 18-30.AlaeddinO.AltounjyR.ZainudinZ.&KamarudinF.2018From physical to digital: investigating consumer behaviour of switching to mobile wallet17218–3010.17512/pjms.2018.17.2.02Search in Google Scholar
Albers, A., Gladysz, B., Pinner, T., Butenko, V., & Stürmlinger, T. (2016). Procedure for defining the system of objectives in the initial phase of an industry 4.0 project focusing on intelligent quality control systems. Procedia CIRP 52, 262-267.AlbersA.GladyszB.PinnerT.ButenkoV.&StürmlingerT.2016Procedure for defining the system of objectives in the initial phase of an industry 4.0 project focusing on intelligent quality control systems52262–26710.1016/j.procir.2016.07.067Search in Google Scholar
Ali, A., & Haseeb, M. (2019). Radio frequency identification (RFID) technology as a strategic tool towards higher performance of supply chain operations in textile and apparel industry of Malaysia. Uncertain Supply Chain Management 7(2), 215-226.AliA.&HaseebM.2019Radio frequency identification (RFID) technology as a strategic tool towards higher performance of supply chain operations in textile and apparel industry of Malaysia72215–22610.5267/j.uscm.2018.10.004Search in Google Scholar
Almada-Lobo, F. (2016). The Industry 4.0 revolution and the future of manufacturing execution systems (MES). Journal of Innovation Management 3(4), 16-21.Almada-LoboF.2016The Industry 4.0 revolution and the future of manufacturing execution systems (MES)3416–2110.24840/2183-0606_003.004_0003Search in Google Scholar
Aral, S., & Weill, P. (2007). IT assets, organizational capabilities, and firm performance: How resource allocations and organizational differences explain performance variation. Organization Science 18(5), 763-780.AralS.&WeillP.2007IT assets, organizational capabilities, and firm performance: How resource allocations and organizational differences explain performance variation185763–78010.1287/orsc.1070.0306Search in Google Scholar
Bagheri, B., Yang, S., Kao, H.-A., & Lee, J. (2015). Cyber-physical systems architecture for self-aware machines in industry 4.0 environment. IFAC-PapersOnLine 48(3), 1622-1627.BagheriB.YangS.KaoH.-A.&LeeJ.2015Cyber-physical systems architecture for self-aware machines in industry 4.0 environment4831622–162710.1016/j.ifacol.2015.06.318Search in Google Scholar
Benitez-Amado, J., & Walczuch, R. M. (2012). Information technology, the organizational capability of proactive corporate environmental strategy and firm performance: a resource-based analysis. European Journal of Information Systems 21(6), 664-679.Benitez-AmadoJ.&WalczuchR. M.2012Information technology, the organizational capability of proactive corporate environmental strategy and firm performance: a resource-based analysis216664–67910.1057/ejis.2012.14Search in Google Scholar
Berre, A.-J., Elvesæter, B., Figay, N., Guglielmina, C., Johnsen, S. G., Karlsen, D., Knothe, T., & Lippe, S. (2007). The ATHENA interoperability framework. In Gonçalves, R. J., Müller, J. P., Mertins, K., & Zelm, M. (Eds.), Enterprise Interoperability II (pp. 569-580). London, United Kingdom: Springer.BerreA.-J.ElvesæterB.FigayN.GuglielminaC.JohnsenS. G.KarlsenD.KnotheT.&LippeS.2007The ATHENA interoperability frameworkGonçalvesR. J.MüllerJ. P.MertinsK.&ZelmM.569–580London, United KingdomSpringer10.1007/978-1-84628-858-6_62Search in Google Scholar
Biao, W., Zhao, J.-Y., Wan, Z.-G., Hong, L., & Jian, M. (2016). Lean Intelligent Production System and Value Stream Practice. DEStech Transactions on Economics, Business and Management (ICEM)BiaoW.ZhaoJ.-Y.WanZ.-G.HongL.&JianM.2016Lean Intelligent Production System and Value Stream PracticeSearch in Google Scholar
Bondar, S., Hsu, J. C., Pfouga, A., & Stjepandić, J. (2017). Agile digital transformation of System-of-Systems architecture models using Zachman framework. Journal of Industrial Information Integration 7, 33-43.BondarS.HsuJ. C.PfougaA.&StjepandićJ.2017Agile digital transformation of System-of-Systems architecture models using Zachman framework733–4310.1016/j.jii.2017.03.001Search in Google Scholar
Bornman, D. A. J. & Puth, G. (2017). Investigating employee perceptions of leadership communication: A South African study. Journal of Contemporary Management 14(1), 1-23.BornmanD. A. J.&PuthG.2017Investigating employee perceptions of leadership communication: A South African study1411–23Search in Google Scholar
Branger, J. (2015). Standardization perspectives of communication infrastructure of future homes: from automated home to sustainable, healthy and manufacturing home.BrangerJ.2015Search in Google Scholar
Branger, J., & Pang, Z. (2015). From automated home to sustainable, healthy and manufacturing home: a new story enabled by the Internet-of-Things and Industry 4.0. Journal of Management Analytics 2(4), 314-332.BrangerJ.&PangZ.2015From automated home to sustainable, healthy and manufacturing home: a new story enabled by the Internet-of-Things and Industry 4.024314–33210.1080/23270012.2015.1115379Search in Google Scholar
Brettel, M., Friederichsen, N., Keller, M., & Rosenberg, M. (2014). How virtualization, decentralization and network building change the manufacturing landscape: An Industry 4.0 Perspective. International Journal of Mechanical, Industrial Science and Engineering 8(1), 37-44.BrettelM.FriederichsenN.KellerM.&RosenbergM.2014How virtualization, decentralization and network building change the manufacturing landscape: An Industry 4.0 Perspective8137–44Search in Google Scholar
Bryson, J. R., & Ronayne, M. (2014). Manufacturing carpets and technical textiles: routines, resources, capabilities, adaptation, innovation and the evolution of the British textile industry. Cambridge Journal of Regions, Economy and Society 7(3), 471-488.BrysonJ. R.&RonayneM.2014Manufacturing carpets and technical textiles: routines, resources, capabilities, adaptation, innovation and the evolution of the British textile industry73471–48810.1093/cjres/rsu018Search in Google Scholar
Cao, B., Wang, Z., Shi, H., & Yin, Y. (2015). Research and practice on Aluminum Industry 4.0 Paper presented at the 2015 Sixth International Conference on Intelligent Control and Information Processing (ICICIP).CaoB.WangZ.ShiH.&YinY.2015Paper presented at the 2015 Sixth International Conference on Intelligent Control and Information Processing (ICICIP)10.1109/ICICIP.2015.7388226Search in Google Scholar
Chen, D., Doumeingts, G., & Vernadat, F. (2008). Architectures for enterprise integration and interoperability: Past, present and future. Computers in Industry 59(7), 647-659.ChenD.DoumeingtsG.&VernadatF.2008Architectures for enterprise integration and interoperability: Past, present and future597647–65910.1016/j.compind.2007.12.016Search in Google Scholar
Chen, Z., & Xing, M. (2015). Upgrading of textile manufacturing based on Industry 4.0 Paper presented at the 5th International Conference on Advanced Design and Manufacturing Engineering.ChenZ.&XingM.2015Paper presented at the 5th International Conference on Advanced Design and Manufacturing Engineering10.2991/icadme-15.2015.400Search in Google Scholar
Chu, W.-S., Kim, M.-S., Jang, K.-H., Song, J.-H., Rodrigue, H., Chun, D.-M., … & Cha, S. W. (2016). From design for manufacturing (DFM) to manufacturing for design (MFD) via hybrid manufacturing and smart factory: A review and perspective of paradigm shift. International Journal of Precision Engineering and Manufacturing-Green Technology 3(2), 209-222.ChuW.-S.KimM.-S.JangK.-H.SongJ.-H.RodrigueH.ChunD.-M.… &ChaS. W.2016From design for manufacturing (DFM) to manufacturing for design (MFD) via hybrid manufacturing and smart factory: A review and perspective of paradigm shift32209–22210.1007/s40684-016-0028-0Search in Google Scholar
Colombo, J. A., Loncan, T. R., & Caldeira, J. F. (2018). Do foreign portfolio capital flows affect domestic investment? Evidence from Brazil. International Journal of Finance & EconomicsColomboJ. A.LoncanT. R.&CaldeiraJ. F.2018Do foreign portfolio capital flows affect domestic investment?10.1002/ijfe.1695Search in Google Scholar
Comrey, A., & Lee, H. (1992). A First Course in Factor Analysis (2nd edn.) Lawrence Earlbaum Associates. New Jersey, United States: Hillsdale.ComreyA.&LeeH.1992(2nd edn.) Lawrence Earlbaum AssociatesNew Jersey, United StatesHillsdaleSearch in Google Scholar
Creswell, J. W. (2009). Research designs: Qualitative, quantitative, and mixed methods approaches Thousand Oaks, United States: Sage Publications.CreswellJ. W.2009Thousand Oaks, United StatesSage PublicationsSearch in Google Scholar
Dabas, N., Yadav, K. K., Ganguli, A. K., & Jha, M. (2019). New process for conversion of hazardous industrial effluent of ceramic industry into nanostructured sodium carbonate and their application in textile industry. Journal of Environmental Management 240, 352-358.DabasN.YadavK. K.GanguliA. K.&JhaM.2019New process for conversion of hazardous industrial effluent of ceramic industry into nanostructured sodium carbonate and their application in textile industry240352–35810.1016/j.jenvman.2019.03.06630953988Search in Google Scholar
Davis, J., Edgar, T., Porter, J., Bernaden, J., & Sarli, M. (2012). Smart manufacturing, manufacturing intelligence and demand-dynamic performance. Computers & Chemical Engineering 47, 145-156.DavisJ.EdgarT.PorterJ.BernadenJ.&SarliM.2012Smart manufacturing, manufacturing intelligence and demand-dynamic performance47145–15610.1016/j.compchemeng.2012.06.037Search in Google Scholar
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017). The role of additive manufacturing in the era of industry 4.0. Procedia Manufacturing 11, 545-554.DilberogluU. M.GharehpapaghB.YamanU.&DolenM.2017The role of additive manufacturing in the era of industry 4.011545–55410.1016/j.promfg.2017.07.148Search in Google Scholar
Durana, P., Kral, P., Stehel, V., Lazaroiu, G., &Sroka, W. (2019) Quality Culture of Manufacturing Enterprises: A Possible Way to Adaptation to Industry 4.0. Social Sciences 8, 124.DuranaP.KralP.StehelV.LazaroiuG.&SrokaW.2019Quality Culture of Manufacturing Enterprises: A Possible Way to Adaptation to Industry 4.0812410.3390/socsci8040124Search in Google Scholar
Fornell, C., & Larcker, D. F. (1981). Evaluating structural equation models with unobservable variables and measurement error. Journal of Marketing Research 39-50.FornellC.&LarckerD. F.1981Evaluating structural equation models with unobservable variables and measurement error39–5010.1177/002224378101800104Search in Google Scholar
Gentner, S. (2016). Industry 4.0: Reality, Future or just Science Fiction? How to Convince Today’s Management to Invest in Tomorrow’s Future! Successful Strategies for Industry 4.0 and Manufacturing IT. CHIMIA International Journal for Chemistry 70(9), 628-633.GentnerS.2016Industry 4.0: Reality, Future or just Science Fiction? How to Convince Today’s Management to Invest in Tomorrow’s Future! Successful Strategies for Industry 4.0 and Manufacturing IT709628–63310.2533/chimia.2016.62827646544Search in Google Scholar
Georgakopoulos, D., Jayaraman, P. P., Fazia, M., Villari, M., & Ranjan, R. (2016). Internet of Things and edge cloud computing roadmap for manufacturing. IEEE Cloud Computing 3(4), 66-73.GeorgakopoulosD.JayaramanP. P.FaziaM.VillariM.&RanjanR.2016Internet of Things and edge cloud computing roadmap for manufacturing3466–7310.1109/MCC.2016.91Search in Google Scholar
Geraci, A., Katki, F., McMonegal, L., Meyer, B., Lane, J., Wilson, P., … & Springsteel, F. (1991). IEEE standard computer dictionary: Compilation of IEEE standard computer glossaries IEEE Press.GeraciA.KatkiF.McMonegalL.MeyerB.LaneJ.WilsonP.… &SpringsteelF.1991IEEE PressSearch in Google Scholar
Ghani, T., Armstrong, M., Auth, C., Bost, M., Charvat, P., Glass, G., … & Klaus, J. (2003). A 90nm high volume manufacturing logic technology featuring novel 45nm gate length strained silicon CMOS transistors Paper presented at the IEEE International Electron Devices Meeting 2003.GhaniT.ArmstrongM.AuthC.BostM.CharvatP.GlassG.… &KlausJ.2003Paper presented at the IEEE International Electron Devices Meeting 2003Search in Google Scholar
Gorecky, D., Schmitt, M., Loskyll, M., & Zühlke, D. (2014). Human-machine-interaction in the industry 4.0 era Paper presented at the 2014 12th IEEE International Conference on Industrial Informatics (INDIN).GoreckyD.SchmittM.LoskyllM.&ZühlkeD.2014Paper presented at the 2014 12th IEEE International Conference on Industrial Informatics (INDIN)10.1109/INDIN.2014.6945523Search in Google Scholar
Gorkhali, A., & Xu, L. D. (2016). Enterprise application integration in industrial integration: a literature review. Journal of Industrial Integration and Management 1(04), 1650014.GorkhaliA.&XuL. D.2016Enterprise application integration in industrial integration: a literature review104165001410.1142/S2424862216500147Search in Google Scholar
Gray, B. J., & Hooley, G. J. (2002). Guest editorial: market orientation and service firm performance – a research agenda. European Journal of Marketing 36(9/10), 980-989.GrayB. J.&HooleyG. J.2002Guest editorial: market orientation and service firm performance – a research agenda369/10980–98910.1108/03090560210437280Search in Google Scholar
Gürdür, D., El-Khoury, J., Seceleanu, T., & Lednicki, L. (2016). Making interoperability visible: Data visualization of cyber-physical systems development tool chains. Journal of Industrial Information Integration 4, 26-34.GürdürD.El-KhouryJ.SeceleanuT.&LednickiL.2016Making interoperability visible: Data visualization of cyber-physical systems development tool chains426–3410.1016/j.jii.2016.09.002Search in Google Scholar
Hair F. J., Sarstedt, M., Hopkins, L., & Kuppelwieser, V. G. (2014). Partial least squares structural equation modeling (PLS-SEM) An emerging tool in business research. European Business Review 26(2), 106-121.HairF. J.SarstedtM.HopkinsL.& KuppelwieserGV.2014Partial least squares structural equation modeling (PLS-SEM) An emerging tool in business research262106–12110.1108/EBR-10-2013-0128Search in Google Scholar
Hair, J. F., Black, W. C., Babin, B. J., Anderson, R. E., & Tatham, R. (2010). Multivariate data analysis Upper Saddle River, United States: Pearson Prentice Hall.HairJ. F.BlackW. C.BabinB. J.AndersonR. E.&TathamR.2010Upper Saddle River, United StatesPearson Prentice HallSearch in Google Scholar
Hair, J. F., Black, W. C., Babin, B. J., Anderson, R. E., & Tatham, R. L. (2006). Multivariate data analysis Upper Saddle River, United States: Pearson Prentice Hall.HairJ. F.BlackW. C.BabinB. J.AndersonR. E.&TathamR. L.2006Upper Saddle River, United StatesPearson Prentice HallSearch in Google Scholar
Hair, J., Hollingsworth, C. L., Randolph, A. B., & Chong, A. Y. L. (2017). An updated and expanded assessment of PLS-SEM in information systems research. Industrial Management & Data Systems 117(3), 442-458.HairJ.HollingsworthC. L.RandolphA. B.&ChongA. Y. L.2017An updated and expanded assessment of PLS-SEM in information systems research1173442–45810.1108/IMDS-04-2016-0130Search in Google Scholar
Harrison, R., Vera, D., & Ahmad, B. (2016). Engineering methods and tools for cyber–physical automation systems. Proceedings of the IEEE 104(5), 973-985.HarrisonR.VeraD.&AhmadB.2016Engineering methods and tools for cyber–physical automation systems1045973–98510.1109/JPROC.2015.2510665Search in Google Scholar
Haseeb, M., Hussain, H.I., Slusarcyzk, B. & Jermsittiparsert, K. (2019). Industry 4.0: A Solution towards Technology Challenges of Sustainable Business Performance. Social Sciences 8(5), 154.HaseebM.HussainH.I.SlusarcyzkB.&JermsittiparsertK.2019Industry 4.0: A Solution towards Technology Challenges of Sustainable Business Performance8515410.3390/socsci8050154Search in Google Scholar
Hettiarachchi, K., Talu, E., Longo, M. L., Dayton, P. A., & Lee, A. P. (2007). On-chip generation of microbubbles as a practical technology for manufacturing contrast agents for ultrasonic imaging. Lab on a Chip 7(4), 463-468.HettiarachchiK.TaluE.LongoM. L.DaytonP. A.&LeeA. P.2007On-chip generation of microbubbles as a practical technology for manufacturing contrast agents for ultrasonic imaging74463–46810.1039/b701481n225366317389962Search in Google Scholar
Hong, Y.-P., Kim, Y., & Cin, B. C. (2015). Product-service system and firm performance: The mediating role of product and process technological innovation. Emerging Markets Finance and Trade 51(5), 975-984.HongY.-P.KimY.&CinB. C.2015Product-service system and firm performance: The mediating role of product and process technological innovation515975–98410.1080/1540496X.2015.1061388Search in Google Scholar
Hounshell, D. (1985). From the American system to mass production, 1800-1932: The development of manufacturing technology in the United States Baltimore, United States: JHU Press.HounshellD.1985Baltimore, United StatesJHU PressSearch in Google Scholar
Hu, Q., & Huang, C. D. (2005). Aligning IT with firm business strategies using the balance scorecard system Paper presented at the null.HuQ.&HuangC. D.2005Paper presented at the nullSearch in Google Scholar
IARC - International Agency for Research on Cancer (1990). Some flame retardants and textile chemicals, and exposures in the textile manufacturing industry. IARC Monographs on the Evaluation of Carcinogenic Risks to Humans 48.IARC - International Agency for Research on Cancer 1990 Some flame retardants and textile chemicals, and exposures in the textile manufacturing industry48Search in Google Scholar
Ivanov, D., Dolgui, A., Sokolov, B., Werner, F., & Ivanova, M. (2016). A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0. International Journal of Production Research 54(2), 386-402.IvanovD.DolguiA.SokolovB.WernerF.&IvanovaM.2016A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0542386–40210.1080/00207543.2014.999958Search in Google Scholar
Ivanov, D., Sokolov, B., & Ivanova, M. (2016). Schedule coordination in cyber-physical supply networks Industry 4.0. IFAC-PapersOnLine, 49(12), 839-844.IvanovD.SokolovB.&IvanovaM.20164912839–84410.1016/j.ifacol.2016.07.879Search in Google Scholar
Jazdi, N. (2014). Cyber physical systems in the context of Industry 4.0 Paper presented at the 2014 IEEE International Conference on Automation, Quality and Testing, Robotics.JazdiN.2014Paper presented at the 2014 IEEE International Conference on Automation, Quality and Testing, Robotics10.1109/AQTR.2014.6857843Search in Google Scholar
Jiang, P., Ding, K., & Leng, J. (2016). Towards a cyber-physical-social-connected and service-oriented manufacturing paradigm: Social Manufacturing. Manufacturing Letters 7, 15-21.JiangP.DingK.&LengJ.2016Towards a cyber-physical-social-connected and service-oriented manufacturing paradigm: Social Manufacturing715–2110.1016/j.mfglet.2015.12.002Search in Google Scholar
Kastalli, I. V., & van Looy, B. (2013). Servitization: Disentangling the impact of service business model innovation on manufacturing firm performance. Journal of Operations Management 31(4), 169-180.KastalliI. V.&van LooyB.2013Servitization: Disentangling the impact of service business model innovation on manufacturing firm performance314169–18010.1016/j.jom.2013.02.001Search in Google Scholar
Kobara, K. (2016). Cyber physical security for industrial control systems and IoT. IEICE Transactions on Information and Systems 99(4), 787-795.KobaraK.2016Cyber physical security for industrial control systems and IoT994787–79510.1587/transinf.2015ICI0001Search in Google Scholar
Kokuryo, D., Kaihara, T., Suginouchi, S., & Kuik, S. (2016). A study on value co-creative design and manufacturing system for tailor-made rubber shoes production – Construction of value co-creative smart factory Paper presented at the 2016 International Symposium on Flexible Automation (ISFA).KokuryoD.KaiharaT.SuginouchiS.&KuikS.2016Paper presented at the 2016 International Symposium on Flexible Automation (ISFA)10.1109/ISFA.2016.7790155Search in Google Scholar
Kolberg, D., & Zühlke, D. (2015). Lean automation enabled by industry 4.0 technologies. IFAC-PapersOnLine 48(3), 1870-1875.KolbergD.&ZühlkeD.2015Lean automation enabled by industry 4.0 technologies4831870–187510.1016/j.ifacol.2015.06.359Search in Google Scholar
Küsters, D., Praß, N., & Gloy, Y. S. (2017). Textile Learning Factory 4.0–Preparing Germany’s Textile Industry for the Digital Future. Procedia Manufacturing 9, 214-221.KüstersD.PraßN.&GloyY. S.2017Textile Learning Factory 4.0–Preparing Germany’s Textile Industry for the Digital Future9214–22110.1016/j.promfg.2017.04.035Search in Google Scholar
Lalic, B., Majstorovic, V., Marjanovic, U., Delić, M., & Tasic, N. (2017). The effect of industry 4.0 concepts and e-learning on manufacturing firm performance: evidence from transitional economy Paper presented at the IFIP International Conference on Advances in Production Management Systems.LalicB.MajstorovicV.MarjanovicU.DelićM.&TasicN.2017Paper presented at the IFIP International Conference on Advances in Production Management SystemsSearch in Google Scholar
Lasi, H., Fettke, P., Kemper, H.-G., Feld, T., & Hoffmann, M. (2014). Industry 4.0. Business & information systems engineering 6(4), 239-242.LasiH.FettkeP.KemperH.-G.FeldT.&HoffmannM.2014Industry 4.064239–24210.1007/s12599-014-0334-4Search in Google Scholar
Lee, J., Ardakani, H. D., Yang, S., & Bagheri, B. (2015). Industrial big data analytics and cyber-physical systems for future maintenance & service innovation. Procedia CIRP 38, 3-7.LeeJ.ArdakaniH. D.YangS.&BagheriB.2015Industrial big data analytics and cyber-physical systems for future maintenance & service innovation383–710.1016/j.procir.2015.08.026Search in Google Scholar
Lee, J., Bagheri, B., & Kao, H.-A. (2015). A cyber-physical systems architecture for industry 4.0-based manufacturing systems. Manufacturing Letters 3, 18-23.LeeJ.BagheriB.&KaoH.-A.2015A cyber-physical systems architecture for industry 4.0-based manufacturing systems318–2310.1016/j.mfglet.2014.12.001Search in Google Scholar
Lom, M., Pribyl, O., & Svitek, M. (2016). Industry 4.0 as a part of smart cities Paper presented at the 2016 Smart Cities Symposium Prague (SCSP).LomM.PribylO.&SvitekM.2016Paper presented at the 2016 Smart Cities Symposium Prague (SCSP)Search in Google Scholar
Longo, F., Nicoletti, L., & Padovano, A. (2017). Smart operators in industry 4.0: A human-centered approach to enhance operators’ capabilities and competencies within the new smart factory context. Computers & Industrial Engineering 113, 144-159.LongoF.NicolettiL.&PadovanoA.2017Smart operators in industry 4.0: A human-centered approach to enhance operators’ capabilities and competencies within the new smart factory context113144–15910.1016/j.cie.2017.09.016Search in Google Scholar
Lu, Y. (2017). Industry 4.0: A survey on technologies, applications and open research issues. Journal of Industrial Information Integration 6, 1-10.LuY.2017Industry 4.0: A survey on technologies, applications and open research issues61–1010.1016/j.jii.2017.04.005Search in Google Scholar
Luftman, J. N., Lewis, P. R., & Oldach, S. H. (1993). Transforming the enterprise: The alignment of business and information technology strategies. IBM Systems Journal 32(1), 198-221.LuftmanJ. N.LewisP. R.&OldachS. H.1993Transforming the enterprise: The alignment of business and information technology strategies321198–22110.1147/sj.321.0198Search in Google Scholar
Magnani, C., Comba, P., Ferraris, F., Ivaldi, C., Meneghin, M., & Terracini, B. (1993). A case-control study of carcinomas of the nose and paranasal sinuses in the woolen textile manufacturing industry. Archives of Environmental Health: An International Journal 48(2), 94-97.MagnaniC.CombaP.FerrarisF.IvaldiC.MeneghinM.&TerraciniB.1993A case-control study of carcinomas of the nose and paranasal sinuses in the woolen textile manufacturing industry48294–9710.1080/00039896.1993.99384018476310Search in Google Scholar
Mao, J., Zhou, Q., Sarmiento, M., Chen, J., Wang, P., Jonsson, F., … & Zou, Z. (2016). A hybrid reader tranceiver design for industrial internet of things. Journal of Industrial Information Integration 2, 19-29.MaoJ.ZhouQ.SarmientoM.ChenJ.WangP.JonssonF.… &ZouZ.2016A hybrid reader tranceiver design for industrial internet of things219–2910.1016/j.jii.2016.05.001Search in Google Scholar
Meyer, N., & Meyer, D. F. (2016). The relationship between the creation of an enabling environment and economic development: A comparative analysis of management at local government sphere. Polish Journal of Management Studies 14(2), 150-160.MeyerN.&MeyerD. F.2016The relationship between the creation of an enabling environment and economic development: A comparative analysis of management at local government sphere142150–16010.17512/pjms.2016.14.2.14Search in Google Scholar
Mo, Y., & Sinopoli, B. (2016). On the performance degradation of cyber-physical systems under stealthy integrity attacks. IEEE Transactions on Automatic Control 61(9), 2618-2624.MoY.&SinopoliB.2016On the performance degradation of cyber-physical systems under stealthy integrity attacks6192618–262410.1109/TAC.2015.2498708Search in Google Scholar
Monostori, L., Kádár, B., Bauernhansl, T., Kondoh, S., Kumara, S., Reinhart, G., … & Ueda, K. (2016). Cyber-physical systems in manufacturing. Cirp Annals 65(2), 621-641.MonostoriL.KádárB.BauernhanslT.KondohS.KumaraS.ReinhartG.… &UedaK.2016Cyber-physical systems in manufacturing652621–64110.1016/j.cirp.2016.06.005Search in Google Scholar
Müller, J. M., Kiel, D., & Voigt, K.-I. (2018). What drives the implementation of industry 4.0? The role of opportunities and challenges in the context of sustainability. Sustainability 10(1), 247.MüllerJ. M.KielD.&VoigtK.-I.2018What drives the implementation of industry 4.0? The role of opportunities and challenges in the context of sustainability10124710.3390/su10010247Search in Google Scholar
Muzekenyi, M. M., Zuwarimwe, J. Z., Kilonzo, B. M. & Nheta, D. S. (2019). An assessment of the role of real exchange rate on economic growth in South Africa. Journal of Contemporary Management 16(1), 40-159.MuzekenyiM. M.ZuwarimweJ. Z.KilonzoB. M.&NhetaD. S.2019An assessment of the role of real exchange rate on economic growth in South Africa16140–15910.35683/jcm18067.0008Search in Google Scholar
Nagy, J., Oláh, J., Erdei, E., Máté, D., & Popp, J. (2018). The Role and Impact of Industry 4.0 and the Internet of Things on the Business Strategy of the Value Chain – The Case of Hungary. Sustainability 10(10), 3491.NagyJ.OláhJ.ErdeiE.MátéD.&PoppJ.2018The Role and Impact of Industry 4.0 and the Internet of Things on the Business Strategy of the Value Chain – The Case of Hungary1010349110.3390/su10103491Search in Google Scholar
Nii, J., Earl, M., & Ross, J. (1996). Eight imperatives for the new IT organisation. Sloan Management Review 38(1), 43-55.NiiJ.EarlM.&RossJ.1996Eight imperatives for the new IT organisation38143–55Search in Google Scholar
Oesterreich, T. D., & Teuteberg, F. (2016). Understanding the implications of digitisation and automation in the context of Industry 4.0: A triangulation approach and elements of a research agenda for the construction industry. Computers in industry 83, 121-139.OesterreichT. D.&TeutebergF.2016Understanding the implications of digitisation and automation in the context of Industry 4.0: A triangulation approach and elements of a research agenda for the construction industry83121–13910.1016/j.compind.2016.09.006Search in Google Scholar
Oses, N., Legarretaetxebarria, A., Quartulli, M., García, I., & Serrano, M. (2016). Uncertainty reduction in measuring and verification of energy savings by statistical learning in manufacturing environments. International Journal on Interactive Design and Manufacturing (IJIDeM) 10(3), 291-299.OsesN.LegarretaetxebarriaA.QuartulliM.GarcíaI.&SerranoM.2016Uncertainty reduction in measuring and verification of energy savings by statistical learning in manufacturing environments103291–29910.1007/s12008-016-0302-ySearch in Google Scholar
Paelke, V. (2014). Augmented reality in the smart factory: Supporting workers in an industry 4.0. environment Paper presented at the Proceedings of the 2014 IEEE emerging technology and factory automation (ETFA).PaelkeV.2014Paper presented at the Proceedings of the 2014 IEEE emerging technology and factory automation (ETFA)10.1109/ETFA.2014.7005252Search in Google Scholar
Pang, Y. L., & Abdullah, A. Z. (2013). Current status of textile industry wastewater management and research progress in Malaysia: a review. Clean–Soil, Air, Water 41(8), 751-764.PangY. L.&AbdullahA. Z.2013Current status of textile industry wastewater management and research progress in Malaysia: a review418751–76410.1002/clen.201000318Search in Google Scholar
Pang, Z., Zhengb, L., Tianb, J., Walterc-Kao, S., Dubrovab, E., & Chen, Q. (2015). Design of a terminal solution for integration of in-home health care devices and services towards the Internet-of-things. Enterprise Information Systems 9, 86-116.PangZ.ZhengbL.TianbJ.Walterc-KaoS.DubrovabE.&ChenQ.2015Design of a terminal solution for integration of in-home health care devices and services towards the Internet-of-things986–11610.1080/17517575.2013.776118Search in Google Scholar
Park, K. T., Kang, Y. T., Yang, S. G., Zhao, W. B., Kang, Y. S., Im, S. J., …. & Do Noh, S. (2019). Cyber Physical Energy System for Saving Energy of the Dyeing Process with Industrial Internet of Things and Manufacturing Big Data. International Journal of Precision Engineering and Manufacturing-Green Technology 1-20.ParkK. T.KangY. T.YangS. G.ZhaoW. B.KangY. S.ImS. J. ….&Do NohS.2019Cyber Physical Energy System for Saving Energy of the Dyeing Process with Industrial Internet of Things and Manufacturing Big Data1–2010.1007/s40684-019-00084-7Search in Google Scholar
Pérez, F., Irisarri, E., Orive, D., Marcos, M., & Estevez, E. (2015). A CPPS Architecture approach for Industry 4.0 Paper presented at the 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).PérezF.IrisarriE.OriveD.MarcosM.&EstevezE.2015Paper presented at the 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)10.1109/ETFA.2015.7301606Search in Google Scholar
Pisching, M. A., Junqueira, F., Santos Filho, D. J., & Miyagi, P. E. (2015). Service composition in the cloud-based manufacturing focused on the industry 4.0 Paper presented at the Doctoral Conference on Computing, Electrical and Industrial Systems.PischingM. A.JunqueiraF.Santos FilhoD. J.&MiyagiP. E.2015Paper presented at the Doctoral Conference on Computing, Electrical and Industrial Systems10.1007/978-3-319-16766-4_7Search in Google Scholar
Posada, J., Toro, C., Barandiaran, I., Oyarzun, D., Stricker, D., de Amicis, R., Pinto, E. B., Eisert, P., Döllner, J., & Vallarino, I. (2015). Visual computing as a key enabling technology for industrie 4.0 and industrial internet. IEEE Computer Graphics and Applications 35(2), 26-40.PosadaJ.ToroC.BarandiaranI.OyarzunD.StrickerD.de AmicisR.PintoE. B.EisertP.DöllnerJ.&VallarinoI.2015Visual computing as a key enabling technology for industrie 4.0 and industrial internet35226–4010.1109/MCG.2015.4525807506Search in Google Scholar
Rai, H. S., Bhattacharyya, M. S., Singh, J., Bansal, T., Vats, P., & Banerjee, U. (2005). Removal of dyes from the effluent of textile and dyestuff manufacturing industry: a review of emerging techniques with reference to biological treatment. Critical Reviews in Environmental Science and Technology 35(3), 219-238.RaiH. S.BhattacharyyaM. S.SinghJ.BansalT.VatsP.&BanerjeeU.2005Removal of dyes from the effluent of textile and dyestuff manufacturing industry: a review of emerging techniques with reference to biological treatment353219–23810.1080/10643380590917932Search in Google Scholar
Reich, B. H., & Benbasat, I. (2000). Factors that influence the social dimension of alignment between business and information technology objectives. MIS Quarterly 81-113.ReichB. H.&BenbasatI.2000Factors that influence the social dimension of alignment between business and information technology objectives81–11310.2307/3250980Search in Google Scholar
Rivard, S., Raymond, L., & Verreault, D. (2006). Resource-based view and competitive strategy: An integrated model of the contribution of information technology to firm performance. The Journal of Strategic Information Systems 15(1), 29-50.RivardS.RaymondL.&VerreaultD.2006Resource-based view and competitive strategy: An integrated model of the contribution of information technology to firm performance15129–5010.1016/j.jsis.2005.06.003Search in Google Scholar
Roblek, V., Meško, M., & Krapež, A. (2016). A complex view of industry 4.0. SAGE Open 6(2), 1-11.RoblekV.MeškoM.&KrapežA.2016A complex view of industry 4.0621–1110.1177/2158244016653987Search in Google Scholar
Romero, D., & Vernadat, F. (2016). Enterprise information systems state of the art: Past, present and future trends. Computers in Industry 79, 3-13.RomeroD.&VernadatF.2016Enterprise information systems state of the art: Past, present and future trends793–1310.1016/j.compind.2016.03.001Search in Google Scholar
Rüßmann, M., Lorenz, M., Gerbert, P., Waldner, M., Justus, J., Engel, P., & Harnisch, M. (2015). Industry 4.0: The future of productivity and growth in manufacturing industries. Boston Consulting Group 9(1), 54-89.RüßmannM.LorenzM.GerbertP.WaldnerM.JustusJ.EngelP.&HarnischM.2015Industry 4.0: The future of productivity and growth in manufacturing industries9154–89Search in Google Scholar
Saeidi, S. P., Sofian, S., Saeidi, P., Saeidi, S. P., & Saaeidi, S. A. (2015). How does corporate social responsibility contribute to firm financial performance? The mediating role of competitive advantage, reputation, and customer satisfaction. Journal of Business Research 68(2), 341-350.SaeidiS. P.SofianS.SaeidiP.SaeidiS. P.&SaaeidiS. A.2015How does corporate social responsibility contribute to firm financial performance? The mediating role of competitive advantage, reputation, and customer satisfaction682341–35010.1016/j.jbusres.2014.06.024Search in Google Scholar
Sandengen, O. C., Estensen, L. A., Rødseth, H., & Schjølberg, P. (2016). High Performance Manufacturing-An Innovative Contribution towards Industry 4.0 Paper presented at the 6th International Workshop of Advanced Manufacturing and Automation.SandengenO. C.EstensenL. A.RødsethH.&SchjølbergP.2016Paper presented at the 6th International Workshop of Advanced Manufacturing and Automation10.2991/iwama-16.2016.3Search in Google Scholar
Sanders, A., Elangeswaran, C., & Wulfsberg, J. P. (2016). Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing. Journal of Industrial Engineering and Management (JIEM) 9(3), 811-833.SandersA.ElangeswaranC.&WulfsbergJ. P.2016Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing93811–83310.3926/jiem.1940Search in Google Scholar
Scheuermann, C., Verclas, S., & Bruegge, B. (2015). Agile factory-an example of an industry 4.0 manufacturing process Paper presented at the 2015 IEEE 3rd International Conference on Cyber-Physical Systems, Networks, and Applications.ScheuermannC.VerclasS.&BrueggeB.2015Paper presented at the 2015 IEEE 3rd International Conference on Cyber-Physical Systems, Networks, and ApplicationsSearch in Google Scholar
Schlechtendahl, J., Keinert, M., Kretschmer, F., Lechler, A., & Verl, A. (2015). Making existing production systems Industry 4.0-ready. Production Engineering 9(1), 143-148.SchlechtendahlJ.KeinertM.KretschmerF.LechlerA.&VerlA.2015Making existing production systems Industry 4.0-ready91143–14810.1007/s11740-014-0586-3Search in Google Scholar
Schmidt, R., Möhring, M., Härting, R.-C., Reichstein, C., Neumaier, P., & Jozinović, P. (2015). Industry 4.0-potentials for creating smart products: empirical research results Paper presented at the International Conference on Business Information Systems.SchmidtR.MöhringM.HärtingR.-C.ReichsteinC.NeumaierP.&JozinovićP.2015Paper presented at the International Conference on Business Information SystemsSearch in Google Scholar
Schuh, G., Gartzen, T., Rodenhauser, T., & Marks, A. (2015). Promoting work-based learning through industry 4.0. Procedia CIRP 32, 82-87.SchuhG.GartzenT.RodenhauserT.&MarksA.2015Promoting work-based learning through industry 4.03282–8710.1016/j.procir.2015.02.213Search in Google Scholar
Schumacher, A., Erol, S., & Sihn, W. (2016). A maturity model for assessing Industry 4.0 readiness and maturity of manufacturing enterprises. Procedia CIRP 52, 161-166.SchumacherA.ErolS.&SihnW.2016A maturity model for assessing Industry 4.0 readiness and maturity of manufacturing enterprises52161–16610.1016/j.procir.2016.07.040Search in Google Scholar
Schuster, K., Plumanns, L., Groß, K., Vossen, R., Richert, A., & Jeschke, S. (2015). Preparing for Industry 4.0 –Testing Collaborative Virtual Learning Environments with Students and Professional Trainers. International Journal of Advanced Corporate Learning (iJAC) 8(4), 14-20.SchusterK.PlumannsL.GroßK.VossenR.RichertA.&JeschkeS.2015Preparing for Industry 4.0 –Testing Collaborative Virtual Learning Environments with Students and Professional Trainers8414–2010.3991/ijac.v8i4.4911Search in Google Scholar
Shafiq, S. I., Sanin, C., Szczerbicki, E., & Toro, C. (2016). Virtual engineering factory: Creating experience base for industry 4.0. Cybernetics and Systems 47(1-2), 32-47.ShafiqS. I.SaninC.SzczerbickiE.&ToroC.2016Virtual engineering factory: Creating experience base for industry 4.0471-232–4710.1080/01969722.2016.1128762Search in Google Scholar
Shafiq, S. I., Sanin, C., Toro, C., & Szczerbicki, E. (2015). Virtual engineering object (VEO): Toward experience-based design and manufacturing for industry 4.0. Cybernetics and Systems 46(1-2), 35-50.ShafiqS. I.SaninC.ToroC.&SzczerbickiE.2015Virtual engineering object (VEO): Toward experience-based design and manufacturing for industry 4.0461-235–5010.1080/01969722.2015.1007734Search in Google Scholar
Ślusarczyk, B. (2018). Industry 4.0 – Are we ready? Polish Journal of Management Studies 17(1), 232-248.ŚlusarczykB.2018Industry 4.0 – Are we ready?171232–24810.17512/pjms.2018.17.1.19Search in Google Scholar
Smirnov, A., Sandkuhl, K., Shilov, N., & Kashevnik, A. (2013). “Product-Process-Machine” System Modeling: Approach and Industrial Case Studies Paper presented at the IFIP Working Conference on The Practice of Enterprise Modeling.SmirnovA.SandkuhlK.ShilovN.&KashevnikA.2013Paper presented at the IFIP Working Conference on The Practice of Enterprise Modeling10.1007/978-3-642-41641-5_18Search in Google Scholar
Sowell, P. K. (2006). The C4ISR Architecture Framework: History, Status, and Plans for Evolution MITRE CORP MCLEAN VA.SowellP. K.2006MITRE CORP MCLEAN VA10.21236/ADA456187Search in Google Scholar
Stoel, M. D., & Muhanna, W. A. (2009). IT capabilities and firm performance: A contingency analysis of the role of industry and IT capability type. Information & Management 46(3), 181-189.StoelM. D.&MuhannaW. A.2009IT capabilities and firm performance: A contingency analysis of the role of industry and IT capability type463181–18910.1016/j.im.2008.10.002Search in Google Scholar
Sun, K.-A., & Kim, D.-Y. (2013). Does customer satisfaction increase firm performance? An application of American Customer Satisfaction Index (ACSI). International Journal of Hospitality Management 35, 68-77.SunK.-A.&KimD.-Y.2013Does customer satisfaction increase firm performance? An application of American Customer Satisfaction Index (ACSI)3568–7710.1016/j.ijhm.2013.05.008Search in Google Scholar
Tang, Z. W. (2015). The industrial robot is in conjunction with homework and system integration Paper presented at the 5th International Conference on Information Engineering for Mechanics and Materials.TangZ. W.2015Paper presented at the 5th International Conference on Information Engineering for Mechanics and Materials10.2991/icimm-15.2015.312Search in Google Scholar
Teo, T. S., & Ang, J. S. (1999). Critical success factors in the alignment of IS plans with business plans. International Journal of Information Management 19(2), 173-185.TeoT. S.&AngJ. S.1999Critical success factors in the alignment of IS plans with business plans192173–18510.1016/S0268-4012(99)00007-9Search in Google Scholar
Thames, L., & Schaefer, D. (2016). Software-defined cloud manufacturing for industry 4.0. Procedia CIRP 52, 12-17.ThamesL.&SchaeferD.2016Software-defined cloud manufacturing for industry 4.05212–1710.1016/j.procir.2016.07.041Search in Google Scholar
Theorin, A., Bengtsson, K., Provost, J., Lieder, M., Johnsson, C., Lundholm, T., & Lennartson, B. (2017). An event-driven manufacturing information system architecture for Industry 4.0. International Journal of Production Research 55(5), 1297-1311.TheorinA.BengtssonK.ProvostJ.LiederM.JohnssonC.LundholmT.&LennartsonB.2017An event-driven manufacturing information system architecture for Industry 4.05551297–131110.1080/00207543.2016.1201604Search in Google Scholar
Thoben, K.-D., Busse, M., Denkena, B., & Gausemeier, J. (2014). System-integrated Intelligence – New Challenges for Product and Production Engineering in the Context of Industry 4.0. Procedia Technology 15, 1-4.ThobenK.-D.BusseM.DenkenaB.&GausemeierJ.2014System-integrated Intelligence – New Challenges for Product and Production Engineering in the Context of Industry 4.0151–410.1016/j.protcy.2014.09.028Search in Google Scholar
Tonelli, F., Demartini, M., Loleo, A., & Testa, C. (2016). A novel methodology for manufacturing firms value modeling and mapping to improve operational performance in the industry 4.0 era. Procedia CIRP 57, 122-127.TonelliF.DemartiniM.LoleoA.&TestaC.2016A novel methodology for manufacturing firms value modeling and mapping to improve operational performance in the industry 4.0 era57122–12710.1016/j.procir.2016.11.022Search in Google Scholar
Tortorella, G. L., & Fettermann, D. (2018). Implementation of Industry 4.0 and lean production in Brazilian manufacturing companies. International Journal of Production Research 56(8), 2975-2987.TortorellaG. L.&FettermannD.2018Implementation of Industry 4.0 and lean production in Brazilian manufacturing companies5682975–298710.1080/00207543.2017.1391420Search in Google Scholar
Tracey, M., Vonderembse, M. A., & Lim, J.-S. (1999). Manufacturing technology and strategy formulation: keys to enhancing competitiveness and improving performance. Journal of Operations Management 17(4), 411-428.TraceyM.VonderembseM. A.&LimJ.-S.1999Manufacturing technology and strategy formulation: keys to enhancing competitiveness and improving performance174411–42810.1016/S0272-6963(98)00045-XSearch in Google Scholar
Wang, S., Wan, J., Zhang, D., Li, D., & Zhang, C. (2016). Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination. Computer Networks 101, 158-168.WangS.WanJ.ZhangD.LiD.&ZhangC.2016Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination101158–16810.1016/j.comnet.2015.12.017Search in Google Scholar
Witkowski, J. Cheba, K., & Kiba-Janiak, M. (2017). The macro-and micro-environmental factors of decisions of production facility location by Japanese companies in Poland. Forum Scientiae Oeconomia 5, 43-56.WitkowskiJ. Cheba, K.&Kiba-JaniakM.2017The macro-and micro-environmental factors of decisions of production facility location by Japanese companies in Poland543–56Search in Google Scholar
Yan, H., Xu, L. D., Bi, Z., Pang, Z., Zhang, J., & Chen, Y. (2015). An emerging technology – wearable wireless sensor networks with applications in human health condition monitoring. Journal of Management Analytics 2(2), 121-137.YanH.XuL. D.BiZ.PangZ.ZhangJ.&ChenY.2015An emerging technology – wearable wireless sensor networks with applications in human health condition monitoring22121–13710.1080/23270012.2015.1029550Search in Google Scholar
Zawra, L. M., Mansour, H. A., Eldin, A. T., & Messiha, N. W. (2017). Utilizing the internet of things (IoT) technologies in the implementation of industry 4.0 Paper presented at the International Conference on Advanced Intelligent Systems and Informatics.ZawraL. M.MansourH. A.EldinA. T.&MessihaN. W.2017Utilizing the internet of things (IoT) technologies in the implementation of industry 4.010.1007/978-3-319-64861-3_75Search in Google Scholar
Zhai, C., Zou, Z., Chen, Q., Xu, L., Zheng, L.-R., & Tenhunen, H. (2016). Delay-aware and reliability-aware contention-free MF–TDMA protocol for automated RFID monitoring in industrial IoT. Journal of Industrial Information Integration 3, 8-19.ZhaiC.ZouZ.ChenQ.XuL.ZhengL.-R.&TenhunenH.2016Delay-aware and reliability-aware contention-free MF–TDMA protocol for automated RFID monitoring in industrial IoT38–1910.1016/j.jii.2016.06.002Search in Google Scholar
Zhang, Y., Qian, C., Lv, J., & Liu, Y. (2017). Agent and cyber-physical system based self-organizing and self-adaptive intelligent shopfloor. IEEE Transactions on Industrial Informatics 13(2), 737-747.ZhangY.QianC.LvJ.&LiuY.2017Agent and cyber-physical system based self-organizing and self-adaptive intelligent shopfloor132737–74710.1109/TII.2016.2618892Search in Google Scholar
Zhao, M., Dröge, C., & Stank, T. P. (2001). The effects of logistics capabilities on firm performance: customer‐focused versus information‐focused capabilities. Journal of Business Logistics 22(2), 91-107.ZhaoM.DrögeC.&StankT. P.2001The effects of logistics capabilities on firm performance: customer‐focused versus information‐focused capabilities22291–10710.1002/j.2158-1592.2001.tb00005.xSearch in Google Scholar
Zheng, P., Sang, Z., Zhong, R. Y., Liu, Y., Liu, C., Mubarok, K., & Xu, X. (2018). Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives. Frontiers of Mechanical Engineering 13(2), 137-150.ZhengP.SangZ.ZhongR. Y.LiuY.LiuC.MubarokK.&XuX.2018Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives132137–15010.1007/s11465-018-0499-5Search in Google Scholar
Zug, S., Wilske, S., Steup, C., & Lüder, A. (2015). Online evaluation of manipulation tasks for mobile robots in Industry 4.0 scenarios Paper presented at the 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).ZugS.WilskeS.SteupC.&LüderA.2015Online evaluation of manipulation tasks for mobile robots in Industry 4.0 scenarios10.1109/ETFA.2015.7301455Search in Google Scholar
Zühlke, D., & Ollinger, L. (2011). Agile automation systems based on cyber-physical systems and service-oriented architectures. Advances in Automation and Robotics 1, 567-574.ZühlkeD.&OllingerL.2011Agile automation systems based on cyber-physical systems and service-oriented architectures1567–57410.1007/978-3-642-25553-3_70Search in Google Scholar