<abstract xmlns="http://www.w3.org/1999/xhtml">In the recent years photovoltaic (PV) industry has experienced a major growth, caused by the ever present annual decrease in module production prices and the expanding awareness of the general public in terms of renewable energy. There are numerous ways to implement PV modules as an additional energy source for a building, be it mounted on the rooftop, or building integrated (BIPV). An analysis of BIPV consisting of 8 modules with the power of 250 Wp each was carried out for the building of the Chemistry Faculty of Gdansk University of Technology (GUT). It included monthly irradiance and energy generation values and compared them to data obtained by the means of PV-GIS system, after inserting site specific coordinates. Additional research on the same type of a single module with the power of 270 Wp was conducted to provide more insight in this matter. A comprehensible analysis allows for defining a final conclusion for the decrease in energy yield for GUT BIPV installation. Data outputs are lower than expected based on PV-GIS values, as for the most time the facade mounted PV system experiences partial soft shading from the nearby park. Furthermore, it is not located directly facing south, but rather south-east which does not prompt ideal working conditions.</abstract>

In the recent years photovoltaic (PV) industry has experienced a major growth, caused by the ever present annual decrease in module production prices and the expanding awareness of the general public in terms of renewable energy. There are numerous ways to implement PV modules as an additional energy source for a building, be it mounted on the rooftop, or building integrated (BIPV). An analysis of BIPV consisting of 8 modules with the power of 250 Wp each was carried out for the building of the Chemistry Faculty of Gdansk University of Technology (GUT). It included monthly irradiance and energy generation values and compared them to data obtained by the means of PV-GIS system, after inserting site specific coordinates. Additional research on the same type of a single module with the power of 270 Wp was conducted to provide more insight in this matter. A comprehensible analysis allows for defining a final conclusion for the decrease in energy yield for GUT BIPV installation. Data outputs are lower than expected based on PV-GIS values, as for the most time the facade mounted PV system experiences partial soft shading from the nearby park. Furthermore, it is not located directly facing south, but rather south-east which does not prompt ideal working conditions.

Energy Yield Generated by a Small Building Integrated Photovoltaic Installation

Department of Chemical Apparatus and Theory of Machines, Faculty of Chemistry

Ecological Chemistry and Engineering S

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Energy Yield Generated by a Small Building Integrated Photovoltaic Installation"}

In the recent years photovoltaic (PV) industry has experienced a major growth, caused by the ever present annual decrease in module production prices and the...

Energy Yield Generated by a Small Building Integrated Photovoltaic Installation

Publié en ligne: 14 oct. 2020

Pages: 335 - 346

DOI: https://doi.org/10.2478/eces-2020-0021

Mots clés
building integrated photovoltaic installation, energy yield, optimal tilt angle, shadowing

© 2020 Ewa Klugmann-Radziemska et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Energy Yield Generated by a Small Building Integrated Photovoltaic Installation

Publié en ligne: 14 oct. 2020

Pages: 335 - 346

DOI: https://doi.org/10.2478/eces-2020-0021

Mots clésbuilding integrated photovoltaic installation, energy yield, optimal tilt angle, shadowing

© 2020 Ewa Klugmann-Radziemska et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
building integrated photovoltaic installation, energy yield, optimal tilt angle, shadowing