<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper discusses nucleate boiling heat transfer on meshed surfaces during pool boiling of distilled water and ethyl alcohol of very high purity. It presents a correlation for heat flux developed for heaters covered with microstructural coatings made of meshes. The experimental results have been compared with the calculation results performed using the correlation and have been followed by discussion. Conclusions regarding the heat flux determination method have been drawn with the particular focus on the usefulness of the considered model for heat flux calculations on samples with sintered mesh layers.</p>
</abstract>

The paper discusses nucleate boiling heat transfer on meshed surfaces during pool boiling of distilled water and ethyl alcohol of very high purity. It presents a correlation for heat flux developed for heaters covered with microstructural coatings made of meshes. The experimental results have been compared with the calculation results performed using the correlation and have been followed by discussion. Conclusions regarding the heat flux determination method have been drawn with the particular focus on the usefulness of the considered model for heat flux calculations on samples with sintered mesh layers.

Discussion of the Heat Flux Calculation Method During Pool Boiling on Meshed Heaters

System Safety: Human - Technical Facility - Environment

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The paper discusses nucleate boiling heat transfer on meshed surfaces during pool boiling of distilled water and ethyl alcohol of very high purity. It presents...

Discussion of the Heat Flux Calculation Method During Pool Boiling on Meshed Heaters

Publié en ligne: 18 avr. 2020

Pages: 247 - 252

Reçu: 23 nov. 2019

Accepté: 20 févr. 2020

DOI: https://doi.org/10.2478/czoto-2020-0030

Mots clés
boiling, coatings, heat flux, meshes

© 2020 Łukasz J. Orman et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Discussion of the Heat Flux Calculation Method During Pool Boiling on Meshed Heaters

Publié en ligne: 18 avr. 2020

Pages: 247 - 252

Reçu: 23 nov. 2019

Accepté: 20 févr. 2020

DOI: https://doi.org/10.2478/czoto-2020-0030

Mots clésboiling, coatings, heat flux, meshes

© 2020 Łukasz J. Orman et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
boiling, coatings, heat flux, meshes