<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this work on the basis of the developed and tested mathematical model, the numerical experiment is conducted in order to study in more detail the specifics of performance of concrete beams` with combined reinforcement. For this purpose nine series of reinforced concrete beams with different combination of steel bars (A400C, At800, A1000) and ribbon reinforcement (C275) were modeled. In the developed series two classes of concrete were used: C50/60, C35/45. The functions derived on the basis of mathematical modeling allow us to determine the recommended percentage of high-strength reinforcement of common reinforced concrete structures with single reinforcement. Therefore, the possibility is obtained to reduce the total structures` reinforcement percentage, increasing their deformability by the specified value without affecting the bearing capacity.</p>
</abstract>

In this work on the basis of the developed and tested mathematical model, the numerical experiment is conducted in order to study in more detail the specifics of performance of concrete beams` with combined reinforcement. For this purpose nine series of reinforced concrete beams with different combination of steel bars (A400C, At800, A1000) and ribbon reinforcement (C275) were modeled. In the developed series two classes of concrete were used: C50/60, C35/45. The functions derived on the basis of mathematical modeling allow us to determine the recommended percentage of high-strength reinforcement of common reinforced concrete structures with single reinforcement. Therefore, the possibility is obtained to reduce the total structures` reinforcement percentage, increasing their deformability by the specified value without affecting the bearing capacity.

Determination of the Optimum Percentage of High Strength Bars in RC Beams with Combined Reinforcement Using Fem

System Safety: Human - Technical Facility - Environment

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In this work on the basis of the developed and tested mathematical model, the numerical experiment is conducted in order to study in more detail the specifics...

Determination of the Optimum Percentage of High Strength Bars in RC Beams with Combined Reinforcement Using Fem

Publié en ligne: 18 avr. 2020

Pages: 230 - 236

Reçu: 28 nov. 2019

Accepté: 07 févr. 2020

DOI: https://doi.org/10.2478/czoto-2020-0028

Mots clés
deformability, serviceability, combined reinforcement, high-strength rebar, steel plate

© 2020 Jacek Selejdak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Determination of the Optimum Percentage of High Strength Bars in RC Beams with Combined Reinforcement Using Fem

Publié en ligne: 18 avr. 2020

Pages: 230 - 236

Reçu: 28 nov. 2019

Accepté: 07 févr. 2020

DOI: https://doi.org/10.2478/czoto-2020-0028

Mots clésdeformability, serviceability, combined reinforcement, high-strength rebar, steel plate

© 2020 Jacek Selejdak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
deformability, serviceability, combined reinforcement, high-strength rebar, steel plate