<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The stress-strain state of reinforced concrete elements is rather complicated issue of scientific research, which integrates different factors, such as the load type, atmospheric conditions, various defects, damages, geometric deviations. It is commonly known that corrosion of reinforced concrete elements affects both the strength and deformation parameters of the structure significantly; thus, internal stresses` parameters are also influenced. Therefore, detailed theoretical investigation of this issue is the main goal of this article. The detailed literature review and thorough analysis was conducted concerning previous experimental and theoretical studies of the corrosion defects` influence on the reinforced concrete elements` stress-strain state. Existing data and results were systematized and analyzed. On the basis of provided research it could be concluded that the reinforced concrete elements` stress-strain state greatly depends on existing damages and impurities. The stress-strain state could be complicated on micro-scale due to material chemical and mechanical peculiarities; simultaneously on macro-scale the bearing capacity is of the structure could be reduced in general. In the articles existing methods for this issue simulation and evaluation are described and perspective fields for further research are identified. The practical significance of the article is due to complex approach to the research and multilateral identification of the main issue key points.</p></abstract>

The stress-strain state of reinforced concrete elements is rather complicated issue of scientific research, which integrates different factors, such as the load type, atmospheric conditions, various defects, damages, geometric deviations. It is commonly known that corrosion of reinforced concrete elements affects both the strength and deformation parameters of the structure significantly; thus, internal stresses` parameters are also influenced. Therefore, detailed theoretical investigation of this issue is the main goal of this article. The detailed literature review and thorough analysis was conducted concerning previous experimental and theoretical studies of the corrosion defects` influence on the reinforced concrete elements` stress-strain state. Existing data and results were systematized and analyzed. On the basis of provided research it could be concluded that the reinforced concrete elements` stress-strain state greatly depends on existing damages and impurities. The stress-strain state could be complicated on micro-scale due to material chemical and mechanical peculiarities; simultaneously on macro-scale the bearing capacity is of the structure could be reduced in general. In the articles existing methods for this issue simulation and evaluation are described and perspective fields for further research are identified. The practical significance of the article is due to complex approach to the research and multilateral identification of the main issue key points.

Corrosion of RC Elements’ Reinforcement and Its Influence on the Stress-Strain State

Conference Quality Production Improvement – CQPI

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The stress-strain state of reinforced concrete elements is rather complicated issue of scientific research, which integrates different factors, such as the...

Corrosion of RC Elements’ Reinforcement and Its Influence on the Stress-Strain State

Publié en ligne: 27 oct. 2020

Pages: 214 - 220

Reçu: 24 mai 2020

Accepté: 26 août 2020

DOI: https://doi.org/10.2478/cqpi-2020-0024

Mots clés
corrosion, reinforced concrete elements, steel bars, stress-strain state

© 2020 Yaroslav Blikharskyy et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Corrosion of RC Elements’ Reinforcement and Its Influence on the Stress-Strain State

Publié en ligne: 27 oct. 2020

Pages: 214 - 220

Reçu: 24 mai 2020

Accepté: 26 août 2020

DOI: https://doi.org/10.2478/cqpi-2020-0024

Mots cléscorrosion, reinforced concrete elements, steel bars, stress-strain state

© 2020 Yaroslav Blikharskyy et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
corrosion, reinforced concrete elements, steel bars, stress-strain state