[Bara, M., Kmita, T., Korzekwa, J., 2016. Microstructure and properties of composite coatings obtained on aluminium alloys. Arch. Metall. Mater., 61, 1107-1112. DOI: 10.1515/amm-2016-023810.1515/amm-2016-0238]Open DOISearch in Google Scholar
[Čaja, A., Nemec, P., Malcho, M., 2014. Influence of the ambient temperature during heat pipe manufacturing on its function and heat transport ability, EPJ Web of Conferences, 67, art. 02012, DOI: 10.1051/epjconf/20146702012.10.1051/epjconf/20146702012]Open DOISearch in Google Scholar
[Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-110.21741/9781945291814-1]Open DOISearch in Google Scholar
[Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-410.21741/9781945291814-4]Open DOISearch in Google Scholar
[Dwornicka, R., 2014. The Impact of the Power Plant Unit Start-Up Scheme on the Pollution Load. Advanced Materials Research, 874, 63-69. DOI: 10.4028/www.scientific.net/AMR.874.6310.4028/www.scientific.net/AMR.874.63]Open DOISearch in Google Scholar
[Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008. DOI: 10.1051/matecconf/20181830300810.1051/matecconf/201818303008]Open DOISearch in Google Scholar
[Filo, G., Fabis-Domagala, J., Domagala, M., Lisowski, E., Momeni, H., 2018a. The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems. MATEC Web Conf., 183, art. 03009. DOI: 10.1051/matecconf/20181830300910.1051/matecconf/201818303009]Open DOISearch in Google Scholar
[Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018b. Modelling of pressure pulse generator with the use of a flow control valve and a fuzzy logic controller. AIP Conf. Proc., 2029, art. 020015. DOI: 10.1063/1.506647710.1063/1.5066477]Open DOISearch in Google Scholar
[Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133]Open DOISearch in Google Scholar
[Gadek-Moszczak, A., Wojnar, L. 2009. Objective, quantitative and automatic x-ray image analysis of the bone regenerate in the ilizarov method. ECS10: The 10th European Congress of Stereology and Image Analysis, Milan, Int. Society for Stereology, 453-458.]Search in Google Scholar
[Gawlik, J., Kielbus, A., Karpisz, D., 2015. Application of an integrated database system for processing difficult material. Solid State Phenomena, 223, 35-45. DOI: 10.4028/www.scientific.net/SSP.223.3510.4028/www.scientific.net/SSP.223.35]Open DOISearch in Google Scholar
[Hosseini, R., Gholaminejad, A., Jahandar, H., 2011. Roughness effects on nucleate pool boiling of R-113 on horizontal circular copper surfaces, World Academy of Science, Engineering and Technology, 55, 679-684. DOI: 10.5281/zenodo.107806810.5281/zenodo.1078068]Open DOISearch in Google Scholar
[Karpisz, D., Kielbus, A., 2018. Selected problems of designing modern industrial databases. MATEC Web Conf., 183, art. 01017. DOI: 10.1051/matecconf/20181830101710.1051/matecconf/201818301017]Open DOISearch in Google Scholar
[Kmita, T., Bara, M., 2012. Surface oxide layers with an increased carbon content for applications in oil-less tribological systems. Chemical and Process Engineering-Inzynieria Chemiczna i Procesowa, 33, 479-486. DOI: 10.2478/v10176-012-0040-z10.2478/v10176-012-0040-z]Open DOISearch in Google Scholar
[Kozien, E., Kozien, M.S., 2017. Academic governance as a determinant of efficient management of a university in Poland - legal and comparative perspective. ESD 2017: Economic and Social Development Conf., Madrid, Varazdin, 38-47.]Search in Google Scholar
[Krawczyk, J., Sobczyk, A., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35]Open DOISearch in Google Scholar
[Lipinski, T., 2015. Double modification of AlSi9Mg alloy with boron, titanium and strontium. Arch. Metall. Mater., 60, 2415-2419. DOI: 10.1515/amm-2015-039410.1515/amm-2015-0394]Open DOISearch in Google Scholar
[Maciejewska, B., Piasecka, M., 2017. Trefftz function-based thermal solution of inverse problem in unsteady-state flow boiling heat transfer in a minichannel, International Journal of Heat and Mass Transfer, 107, 925-933, DOI: 10.1016/j.ijheatmasstransfer.2016.11.003.10.1016/j.ijheatmasstransfer.2016.11.003]Open DOISearch in Google Scholar
[Maciejewska, B., Piasecka, M., 2017. An application of the non-continuous Trefftz method to the determination of heat transfer coefficient for flow boiling in a minichannel, Heat and Mass Transfer, 53(4), 1211-1224, DOI: 10.1007/s00231-016-1895-1.10.1007/s00231-016-1895-1]Open DOISearch in Google Scholar
[Nemec, P., Caja, A., Lenhard, R., 2009. Analysis of heat transfer limitation of wick heat pipe, Int. Conf. Experimental Fluid Mechanics 2009, Liberec, Czech Republic, 229-234.]Search in Google Scholar
[Nemec, P., Malcho, M., Kaduchova, K., 2017. Experimental measurement, calculation and thermal visualization condenser temperature of cooling device with a heat pipe technology, EPJ Web of Conferences, 143, DOI: 10.1051/epjconf/201714302078.10.1051/epjconf/201714302078]Open DOISearch in Google Scholar
[Nishikawa K., Fujita Y., Ohta H., Hidaka S., 1982. Effect of the surface roughness on the nucleate boiling heat transfer over the wide range of pressure, International Heat Transfer Conference, Munchen, Germany, 4, PB10, 61-66.10.1615/IHTC7.3790]Search in Google Scholar
[Opydo, M., Kobylecki, R., Dudek, A., Bis, Z. 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy, 85, 61-68. DOI: 10.1016/j.biombioe.2015.12.01110.1016/j.biombioe.2015.12.011]Open DOISearch in Google Scholar
[Orman, Ł.J., 2013. Boiling heat transfer on single phosphor bronze and copper mesh microstructures, Int. Conf. Experimental Fluid Mechanics 2013, Kutná Hora, Czech Republic, 519-522. DOI: 10.1051/epjconf/2014670208710.1051/epjconf/20146702087]Open DOISearch in Google Scholar
[Orman, Ł. J., 2016. Enhancement of pool boiling heat transfer with pin-fin microstructures, Journal of Enhanced Heat Transfer, 23, 137-153, DOI: 10.1615/JEnhHeatTransf.2017019452.10.1615/JEnhHeatTransf.2017019452]Open DOISearch in Google Scholar
[Passos, J. C., Reinaldo, R.F., 2000, Analysis of pool boiling within smooth and grooved tubes, Experimental Thermal and Fluid Science, 22, 35-44, DOI: 10.1016/S0894-1777(00)00008-X.10.1016/S0894-1777(00)00008-X]Open DOISearch in Google Scholar
[Pastuszko, R., 2018. Pool boiling heat transfer on micro-fins with wire mesh Experiments and heat flux prediction, International Journal of Thermal Sciences, 125, 197-209, DOI: 10.1016/j.ijthermalsci.2017.11.019.10.1016/j.ijthermalsci.2017.11.019]Open DOISearch in Google Scholar
[Pastuszko, R., 2010. Pool boiling on micro-fin array with mesh structures, International Journal of Thermal Sciences, 49, 2289–2298, DOI: 10.1016/j.ijthermalsci.2010.07.016.10.1016/j.ijthermalsci.2010.07.016]Open DOISearch in Google Scholar
[Pastuszko, R., Wójcik, T. M., 2015. Experimental investigations and a simplified model for pool boiling on micro-fins with sintered perforated foil, Experimental Thermal and Fluid Science, 63, 34-44, DOI: 10.1016/j.expthermflusci.2015.01.002.10.1016/j.expthermflusci.2015.01.002]Open DOISearch in Google Scholar
[Ribatski, G., Saiz Jabardo, J. M., 2003. Experimental study of nucleate boiling of halocarbon refrigerants on cylindrical surfaces, International Journal of Heat and Mass Transfer, 46(23), 4439-4451, DOI: 10.1016/S0017-9310(03)00252-7.10.1016/S0017-9310(03)00252-7]Open DOISearch in Google Scholar
[Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.020255610.1371/journal.pone.0202556]Search in Google Scholar
[Strąk, K., Piasecka, M., Maciejewska, B., 2018. Spatial orientation as a factor in flow boiling heat transfer of cooling liquids in enhanced surface minichannels, International Journal of Heat and Mass Transfer, 117, 375-387, DOI: 10.1016/j.ijheatmasstransfer.2017.10.019.10.1016/j.ijheatmasstransfer.2017.10.019]Open DOISearch in Google Scholar