<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper investigates the load capacity and failure modes of slender hollow RC column under axial and eccentric loads. For the slender hollow columns, different load eccentricities and hole shapes are used. The finite element software ABAQUS is used to model and analyze the columns. The experimental test result is used to conduct a verification investigation of the nonlinear finite element modeling. All specifications of the experimentally tested columns are taken into consideration in the modeling to establish the verification of the model. When the modeling and test results are compared, it is noticeable that they are in good agreement. As a result, the modeling’s accuracy is proved. Then, a parametric study included different slenderness ratio, section shape, concrete strength and SFR strengthened has been done with the same modeling method. The effects of these variables on the column load capacity are investigated. It is found that increasing slenderness ratio led to smaller peak load. Increasing of moment of inertia of square and circular section decreased the peak load capacity. The maximum bearing capacity increased with higher concrete strength. Also, SFR distribution through the length of columns effected on load bearing capacity.</p>
</abstract>

This paper investigates the load capacity and failure modes of slender hollow RC column under axial and eccentric loads. For the slender hollow columns, different load eccentricities and hole shapes are used. The finite element software ABAQUS is used to model and analyze the columns. The experimental test result is used to conduct a verification investigation of the nonlinear finite element modeling. All specifications of the experimentally tested columns are taken into consideration in the modeling to establish the verification of the model. When the modeling and test results are compared, it is noticeable that they are in good agreement. As a result, the modeling’s accuracy is proved. Then, a parametric study included different slenderness ratio, section shape, concrete strength and SFR strengthened has been done with the same modeling method. The effects of these variables on the column load capacity are investigated. It is found that increasing slenderness ratio led to smaller peak load. Increasing of moment of inertia of square and circular section decreased the peak load capacity. The maximum bearing capacity increased with higher concrete strength. Also, SFR distribution through the length of columns effected on load bearing capacity.

Nonlinear Analysis of Hollow Slender Reinforced Concrete Columns Subjected to Concentric and Eccentric Loads

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

This paper investigates the load capacity and failure modes of slender hollow RC column under axial and eccentric loads. For the slender hollow columns,...

Nonlinear Analysis of Hollow Slender Reinforced Concrete Columns Subjected to Concentric and Eccentric Loads

Publié en ligne: 29 juin 2022

Pages: 76 - 86

DOI: https://doi.org/10.2478/cee-2022-0008

Mots clés
Hollow slender RC column, Eccentricity, Nonlinear analysis, FE analysis, Abaqus

© 2022 Wameedh Issa Braidi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Nonlinear Analysis of Hollow Slender Reinforced Concrete Columns Subjected to Concentric and Eccentric Loads

Publié en ligne: 29 juin 2022

Pages: 76 - 86

DOI: https://doi.org/10.2478/cee-2022-0008

Mots clésHollow slender RC column, Eccentricity, Nonlinear analysis, FE analysis, Abaqus

© 2022 Wameedh Issa Braidi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
Hollow slender RC column, Eccentricity, Nonlinear analysis, FE analysis, Abaqus