<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The paper deals with the real behaviour of the riveted steel railway bridge deck members’ connections with respect to their bending stiffness. Attention is paid to the stringer-to-cross beam connection as well as the cross beam-to-main girder connection. The stiffness of the two connections is investigated on the basis of evaluation of the experimentally determined stress response of the observed structural members to the actual traffic load on an existing railway bridge.</p></abstract>

The paper deals with the real behaviour of the riveted steel railway bridge deck members’ connections with respect to their bending stiffness. Attention is paid to the stringer-to-cross beam connection as well as the cross beam-to-main girder connection. The stiffness of the two connections is investigated on the basis of evaluation of the experimentally determined stress response of the observed structural members to the actual traffic load on an existing railway bridge.

Experimental Analysis of Stiffness of the Riveted Steel Railway Bridge Deck Members’ Joints

Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper deals with the real behaviour of the riveted steel railway bridge deck members’ connections with respect to their bending stiffness. Attention is...

Experimental Analysis of Stiffness of the Riveted Steel Railway Bridge Deck Members’ Joints

Publié en ligne: 30 déc. 2014

Pages: 105 - 110

DOI: https://doi.org/10.2478/cee-2014-0019

Mots clés
Riveted steel railway bridge, Stringer-to-cross beam connection, Cross beam-to-main girder connection, Experimental measurements, Joint stiffness

© 2015

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Experimental Analysis of Stiffness of the Riveted Steel Railway Bridge Deck Members’ Joints

Publié en ligne: 30 déc. 2014

Pages: 105 - 110

DOI: https://doi.org/10.2478/cee-2014-0019

Mots clésRiveted steel railway bridge, Stringer-to-cross beam connection, Cross beam-to-main girder connection, Experimental measurements, Joint stiffness

© 2015

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
Riveted steel railway bridge, Stringer-to-cross beam connection, Cross beam-to-main girder connection, Experimental measurements, Joint stiffness