<abstract xmlns="http://www.w3.org/1999/xhtml"><p> In order to optimize the breathing apparatus in the open circuit for divers, theoretical calculus and numerical simulation of resistances specific to the potential flow of gas through the studied circuit were made. Respiratory gas flow simulation through three constructive versions of the second stage pressure reducer intake mechanism was done after modeling the respiratory air circuit through the two main restrictors: the first variable (between the seat and the piston) and the second fixed (the hole in the cylindrical piston). The results regarding the theoretical calculation and numerical simulation have been validated by experimental testing of two of the studied models. Experimental measurements were made on a tester at the Diving Center of Constanta's Hyperbaric Laboratory. The volume flow rate of supplied respiratory gas was recorded, together with the inspire depression that opens the mechanism, until the maximum flow rate for each constructive version. After validating the results of the theoretical calculation and numerical simulation on the two models, the conclusion is the same: the resistance decreases if the geometry of the cylindrical hole in the piston (the second fixed restrictor) changes in a conical hole</p></abstract>

In order to optimize the breathing apparatus in the open circuit for divers, theoretical calculus and numerical simulation of resistances specific to the potential flow of gas through the studied circuit were made. Respiratory gas flow simulation through three constructive versions of the second stage pressure reducer intake mechanism was done after modeling the respiratory air circuit through the two main restrictors: the first variable (between the seat and the piston) and the second fixed (the hole in the cylindrical piston). The results regarding the theoretical calculation and numerical simulation have been validated by experimental testing of two of the studied models. Experimental measurements were made on a tester at the Diving Center of Constanta's Hyperbaric Laboratory. The volume flow rate of supplied respiratory gas was recorded, together with the inspire depression that opens the mechanism, until the maximum flow rate for each constructive version. After validating the results of the theoretical calculation and numerical simulation on the two models, the conclusion is the same: the resistance decreases if the geometry of the cylindrical hole in the piston (the second fixed restrictor) changes in a conical hole

Experimental validation of theoretical calculation and numerical simulation for optimization of divers’s breathing apparatus

Scientific Bulletin

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

In order to optimize the breathing apparatus in the open circuit for divers, theoretical calculus and numerical simulation of resistances specific to the...

Experimental validation of theoretical calculation and numerical simulation for optimization of divers’s breathing apparatus

Publié en ligne: 27 juil. 2018

Pages: 53 - 59

DOI: https://doi.org/10.2478/bsaft-2018-0007

Mots clés
Breathing apparatus, theoretical calculation, numerical simulation, experimental validation

© 2018 Tamara Stanciu, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Experimental validation of theoretical calculation and numerical simulation for optimization of divers’s breathing apparatus

Publié en ligne: 27 juil. 2018

Pages: 53 - 59

DOI: https://doi.org/10.2478/bsaft-2018-0007

Mots clésBreathing apparatus, theoretical calculation, numerical simulation, experimental validation

© 2018 Tamara Stanciu, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
Breathing apparatus, theoretical calculation, numerical simulation, experimental validation