Accès libre

Use of the 3-Level Idea Diagram Method to Identify Constructive Solutions for the Development of a Thermoforming Mould

Marius-Andrei Boca

Marius-Andrei Boca

  • “Gheorghe Asachi” Technical University of Iaşi, Faculty of Mechanical EngineeringIaşi, Romania
  • “University of Applied Sciences Ansbach”, Faculty of TechnologyAnsbach, Germany
Recherchez cet auteur sur
Sciendo|Google Scholar
Boca, Marius-Andrei
, 
Alexandru Sover

Alexandru Sover

“University of Applied Sciences Ansbach”, Faculty of TechnologyAnsbach, Germany
Recherchez cet auteur sur
Sciendo|Google Scholar
Sover, Alexandru
 et 
Laurenţiu Slătineanu

Laurenţiu Slătineanu

“Gheorghe Asachi” Technical University of Iaşi, Faculty of Mechanical EngineeringIaşi, Romania
Recherchez cet auteur sur
Sciendo|Google Scholar
Slătineanu, Laurenţiu
  
10 févr. 2023
Use of the 3-Level Idea Diagram Method to Identify Constructive Solutions for the Development of a Thermoforming Mould's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 10 févr. 2023
Pages: 9 - 22
Reçu: 06 oct. 2022
Accepté: 26 oct. 2022
DOI: https://doi.org/10.2478/bipcm-2022-0031
Mots clés
© 2022 Marius-Andrei Boca et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Boca, Marius-Andrei
“Gheorghe Asachi” Technical University of Iaşi, Faculty of Mechanical EngineeringIaşi, Romania
“University of Applied Sciences Ansbach”, Faculty of TechnologyAnsbach, Germany
Sover, Alexandru
“University of Applied Sciences Ansbach”, Faculty of TechnologyAnsbach, Germany
Slătineanu, Laurenţiu
“Gheorghe Asachi” Technical University of Iaşi, Faculty of Mechanical EngineeringIaşi, Romania
Langue:
Anglais
Périodicité:
4 fois par an
Sujets de la revue:
Ingénierie, Génie mécanique, Fondamentaux du génie mécanique, Thermodynamique, Technologie de production, Mécatronique et automobile
RSS Feed de la revue