<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>To comply with latest standards regarding emission regulations, diesel technology focuses on how to obtain a very good spray quality, by identifying the appropriate geometry for injector nozzles, the optimum size of injection holes and the best hydraulic parameters for efficient fuel spray evolution and dispersion. In practice, injectors are often subject to operating problems, mainly because inside the diesel fuel injector nozzle, accumulation of deposits might occur. To control the phenomenon, the scientific literature proposes anti-corrosion treatment. The present paper studies the effect of applying anti-corrosion treatment to a new diesel injector. The investigation method consists in using a Scanning Electron Microscope next to EDX Spectrometry. The results indicate that chemical treatment can lead to new deposits that also contaminate the nozzles. Concluding, the anticorrosion treatment must include monitoring and control of the process and as a final step, a method to remove detergent deposits.</p>
</abstract>

To comply with latest standards regarding emission regulations, diesel technology focuses on how to obtain a very good spray quality, by identifying the appropriate geometry for injector nozzles, the optimum size of injection holes and the best hydraulic parameters for efficient fuel spray evolution and dispersion. In practice, injectors are often subject to operating problems, mainly because inside the diesel fuel injector nozzle, accumulation of deposits might occur. To control the phenomenon, the scientific literature proposes anti-corrosion treatment. The present paper studies the effect of applying anti-corrosion treatment to a new diesel injector. The investigation method consists in using a Scanning Electron Microscope next to EDX Spectrometry. The results indicate that chemical treatment can lead to new deposits that also contaminate the nozzles. Concluding, the anticorrosion treatment must include monitoring and control of the process and as a final step, a method to remove detergent deposits.

Effect of Anti-Corrosion Treatment Applied to Diesel Injector Nozzles

“Gheorghe Asachi” Technical University of Iaşi

Bulletin of the Polytechnic Institute of Iași. Machine constructions Section

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Effect of Anti-Corrosion Treatment Applied to Diesel Injector Nozzles"}

To comply with latest standards regarding emission regulations, diesel technology focuses on how to obtain a very good spray quality, by identifying the...

Effect of Anti-Corrosion Treatment Applied to Diesel Injector Nozzles

Publié en ligne: 23 févr. 2022

Pages: 9 - 15

Reçu: 10 juil. 2021

Accepté: 08 août 2021

DOI: https://doi.org/10.2478/bipcm-2021-0018

Mots clés
fuel injection, fuel spray, injector nozzle, deposit formation, anti-corrosion treatment

© 2021 Mihai-Vasile Roman et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Effect of Anti-Corrosion Treatment Applied to Diesel Injector Nozzles

Publié en ligne: 23 févr. 2022

Pages: 9 - 15

Reçu: 10 juil. 2021

Accepté: 08 août 2021

DOI: https://doi.org/10.2478/bipcm-2021-0018

Mots clésfuel injection, fuel spray, injector nozzle, deposit formation, anti-corrosion treatment

© 2021 Mihai-Vasile Roman et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
fuel injection, fuel spray, injector nozzle, deposit formation, anti-corrosion treatment