<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This paper discusses and calculates the impact of the gyroscopic effect on the increase in the agricultural machine working assemblies’ load on bearings of the chaff cutter type. This effect occurs under natural field operational conditions of this type of machine either during the change in direction of its movement or moving over irregular surface and is caused by a sudden change in the axis direction of quickly rotating masses. In a form of graph, there is a presentation of a mathematical model and exemplary results of simulation calculations for selected parameter values related to the movement and operation of machines with a high-speed drum. Calculations were conducted on the basis of analysis of technical data of working machines of the chaff cutter type. Conducted analysis of the agricultural machine working assemblies’ load on bearings showed that these loads may temporarily increase even by ten times in case of the machine turn and eight times in case of moving over irregular of surface, considerably influencing their lifetime.</p></abstract>

This paper discusses and calculates the impact of the gyroscopic effect on the increase in the agricultural machine working assemblies’ load on bearings of the chaff cutter type. This effect occurs under natural field operational conditions of this type of machine either during the change in direction of its movement or moving over irregular surface and is caused by a sudden change in the axis direction of quickly rotating masses. In a form of graph, there is a presentation of a mathematical model and exemplary results of simulation calculations for selected parameter values related to the movement and operation of machines with a high-speed drum. Calculations were conducted on the basis of analysis of technical data of working machines of the chaff cutter type. Conducted analysis of the agricultural machine working assemblies’ load on bearings showed that these loads may temporarily increase even by ten times in case of the machine turn and eight times in case of moving over irregular of surface, considerably influencing their lifetime.

Gyroscopic Effect in Machine Working Assemblies

Acta Technologica Agriculturae

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Gyroscopic Effect in Machine Working Assemblies"}

This paper discusses and calculates the impact of the gyroscopic effect on the increase in the agricultural machine working assemblies’ load on bearings of the...

Gyroscopic Effect in Machine Working Assemblies

Publié en ligne: 20 févr. 2020

Pages: 24 - 29

DOI: https://doi.org/10.2478/ata-2020-0005

Mots clés
increased load on bearings, high-speed machine working assemblies, bearing load in cutting assemblies, bearing load in working machines, mathematical model

© 2020 Marcin Zastempowski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Gyroscopic Effect in Machine Working Assemblies

Publié en ligne: 20 févr. 2020

Pages: 24 - 29

DOI: https://doi.org/10.2478/ata-2020-0005

Mots clésincreased load on bearings, high-speed machine working assemblies, bearing load in cutting assemblies, bearing load in working machines, mathematical model

© 2020 Marcin Zastempowski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
increased load on bearings, high-speed machine working assemblies, bearing load in cutting assemblies, bearing load in working machines, mathematical model