<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Paper presents feasibility study for verification of the hypothesis of improving the productivity of reload operations using screw conveyors with rotary casings. For this purpose, an experimental installation was developed and experimental studies were conducted. Research results fully confirmed the hypothesis. On the basis of a feasibility study of casing rotation in screw conveyors, the conveyor performance increased by 24%, with the conveyor capacity thereby increased by 4.5%. Due to the application of rational parameters of the screw conveyor with a rotary casing, overall economic factor was improved by more than 10%. To achieve the economic efficiency of reload operations using screw conveyors with rotary casings, the rotational frequency of the casing should range from 460 to 620 rpm.</p>
</abstract>

Paper presents feasibility study for verification of the hypothesis of improving the productivity of reload operations using screw conveyors with rotary casings. For this purpose, an experimental installation was developed and experimental studies were conducted. Research results fully confirmed the hypothesis. On the basis of a feasibility study of casing rotation in screw conveyors, the conveyor performance increased by 24%, with the conveyor capacity thereby increased by 4.5%. Due to the application of rational parameters of the screw conveyor with a rotary casing, overall economic factor was improved by more than 10%. To achieve the economic efficiency of reload operations using screw conveyors with rotary casings, the rotational frequency of the casing should range from 460 to 620 rpm.

Feasibility Study of Improving the Transport Performance by Means of Screw Conveyors with Rotary Casings

Ternopil Ivan Puluj National Technical University

Acta Technologica Agriculturae

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Paper presents feasibility study for verification of the hypothesis of improving the productivity of reload operations using screw conveyors with rotary...

Feasibility Study of Improving the Transport Performance by Means of Screw Conveyors with Rotary Casings

Publié en ligne: 12 nov. 2019

Pages: 140 - 145

DOI: https://doi.org/10.2478/ata-2019-0025

Mots clés
screw conveyor, rotary casing, productivity, feasibility study

© 2019 Roman Rohatynskyi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Feasibility Study of Improving the Transport Performance by Means of Screw Conveyors with Rotary Casings

Publié en ligne: 12 nov. 2019

Pages: 140 - 145

DOI: https://doi.org/10.2478/ata-2019-0025

Mots clésscrew conveyor, rotary casing, productivity, feasibility study

© 2019 Roman Rohatynskyi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
screw conveyor, rotary casing, productivity, feasibility study