<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Guide rings and rolling bodies are mainly made of alloy steel with a high chromium content, heat treated, as well as of carburising steel. The efforts to improve the standard of quality of bearing steels are determined by the interest of continuously increasing the adhesion of constructive types. These steels are recommended for large bearings which operate under shock and vibration conditions. Thermochemical treatments are followed by quenching and tempering heat treatments. However, undesirable defects occur sometimes on the surface of the carburised layer and solutions are constantly being sought to identify the causes thereof.</p>
</abstract>

Guide rings and rolling bodies are mainly made of alloy steel with a high chromium content, heat treated, as well as of carburising steel. The efforts to improve the standard of quality of bearing steels are determined by the interest of continuously increasing the adhesion of constructive types. These steels are recommended for large bearings which operate under shock and vibration conditions. Thermochemical treatments are followed by quenching and tempering heat treatments. However, undesirable defects occur sometimes on the surface of the carburised layer and solutions are constantly being sought to identify the causes thereof.

Study on Potential Causes of Defects Following Heat and Thermochemical (Carburising) Treatments of Linear Bearings

Acta Marisiensis. Seria Technologica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Guide rings and rolling bodies are mainly made of alloy steel with a high chromium content, heat treated, as well as of carburising steel. The efforts to...

Study on Potential Causes of Defects Following Heat and Thermochemical (Carburising) Treatments of Linear Bearings

Publié en ligne: 12 déc. 2022

Pages: 1 - 5

DOI: https://doi.org/10.2478/amset-2022-0010

Mots clés
heat treatments, carburizing, materials, defects

© 2022 Maria Stoicanescu, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Study on Potential Causes of Defects Following Heat and Thermochemical (Carburising) Treatments of Linear Bearings

Publié en ligne: 12 déc. 2022

Pages: 1 - 5

DOI: https://doi.org/10.2478/amset-2022-0010

Mots clésheat treatments, carburizing, materials, defects

© 2022 Maria Stoicanescu, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
heat treatments, carburizing, materials, defects