<abstract xmlns="http://www.w3.org/1999/xhtml">

When exposed to corrosive environments, metals, which are relatively common industrial materials, undergo serious corrosion, leading to significant economic losses. Therefore, studying the corrosion rate of metals in their early stages holds great pedagogical significance. This study employs a standard specimen of 20# steel as an experimental object, designing the experimental teaching of metal corrosion rate under varying temperatures, PH levels, and hydrated salt materials. The weightlessness method determines the overall corrosion rate of the metal, while the electrochemical method determines the localized corrosion rate of the metal. When the experimental temperature is 80℃ and 100℃, the corrosion rate of 20# steel is the largest; both are 0.00800g·m−2·d−1, and the charge transfer resistance increases gradually when the temperature is −20℃~5℃, and decreases gradually when the temperature is 5℃~100℃. The corrosion rate of the metal did not change much at pH=7 and 8, and the corrosion rate reached 0.688 mm/a, and the impedance curve polarization resistance Rp was the smallest when pH=5, and its corrosion resistance was poor under acidic conditions. The average corrosion rates in MgSO4·7H2O, and CaCl2·6H2O and Ba(OH)2·8H2O were 0.0030g/m−2h−1, 0.0018g/m−2h−1, and 0.0050 g/m−2h−1, respectively. Teaching experiments were used to carry out the present study. The study aims to let students experience the process of metal corrosion through teaching experiments and better help them solve cognitive difficulties in metal corrosion.
</abstract>

When exposed to corrosive environments, metals, which are relatively common industrial materials, undergo serious corrosion, leading to significant economic losses. Therefore, studying the corrosion rate of metals in their early stages holds great pedagogical significance. This study employs a standard specimen of 20# steel as an experimental object, designing the experimental teaching of metal corrosion rate under varying temperatures, PH levels, and hydrated salt materials. The weightlessness method determines the overall corrosion rate of the metal, while the electrochemical method determines the localized corrosion rate of the metal. When the experimental temperature is 80℃ and 100℃, the corrosion rate of 20# steel is the largest; both are 0.00800g·m−2·d−1, and the charge transfer resistance increases gradually when the temperature is −20℃~5℃, and decreases gradually when the temperature is 5℃~100℃. The corrosion rate of the metal did not change much at pH=7 and 8, and the corrosion rate reached 0.688 mm/a, and the impedance curve polarization resistance Rp was the smallest when pH=5, and its corrosion resistance was poor under acidic conditions. The average corrosion rates in MgSO4·7H2O, and CaCl2·6H2O and Ba(OH)2·8H2O were 0.0030g/m−2h−1, 0.0018g/m−2h−1, and 0.0050 g/m−2h−1, respectively. Teaching experiments were used to carry out the present study. The study aims to let students experience the process of metal corrosion through teaching experiments and better help them solve cognitive difficulties in metal corrosion.

Experimental teaching design of weightlessness method to determine the corrosion rate of metal

Applied Mathematics and Nonlinear Sciences

This work is licensed under the Creative Commons Attribution 4.0 International License.

When exposed to corrosive environments, metals, which are relatively common industrial materials, undergo serious corrosion, leading to significant economic...

Experimental teaching design of weightlessness method to determine the corrosion rate of metal

Publié en ligne: 05 août 2024

Pages: -

Reçu: 03 avr. 2024

Accepté: 19 juin 2024

DOI: https://doi.org/10.2478/amns-2024-2111

Mots clés
Weight loss method, Electrochemical method, PH value, Hydrated salt material, Metal corrosion rate

© 2024 Jianhua Zhao et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Experimental teaching design of weightlessness method to determine the corrosion rate of metal

Publié en ligne: 05 août 2024

Pages: -

Reçu: 03 avr. 2024

Accepté: 19 juin 2024

DOI: https://doi.org/10.2478/amns-2024-2111

Mots clésWeight loss method, Electrochemical method, PH value, Hydrated salt material, Metal corrosion rate

© 2024 Jianhua Zhao et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
Weight loss method, Electrochemical method, PH value, Hydrated salt material, Metal corrosion rate