<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The objective of this study was to investigate pore shape effect on resistance to compression of open porosity lattice structures obtained with 3D printing. To this end, three distinct pore architectures were investigated: ellipsoidal, helical and X-shape. Open porosity of these structures was 54%, 50% and 60%, respectively. Their mechanical properties were evaluated through compression tests, and their behaviours were analysed using finite element modelling (FEM). The results indicated that the pore size has a significant effect on the stiffness of cellular structures. It was observed that the helical structure exhibited superior properties among the structures tested due to homogenous stress distribution. It was also found that ellipsoidal and x-shape structures are much more sensitive to localisation of the deformation.</p>
</abstract>

The objective of this study was to investigate pore shape effect on resistance to compression of open porosity lattice structures obtained with 3D printing. To this end, three distinct pore architectures were investigated: ellipsoidal, helical and X-shape. Open porosity of these structures was 54%, 50% and 60%, respectively. Their mechanical properties were evaluated through compression tests, and their behaviours were analysed using finite element modelling (FEM). The results indicated that the pore size has a significant effect on the stiffness of cellular structures. It was observed that the helical structure exhibited superior properties among the structures tested due to homogenous stress distribution. It was also found that ellipsoidal and x-shape structures are much more sensitive to localisation of the deformation.

Effect of Pore Architecture of 3D Printed Open Porosity Cellular Structures on Their Resistance to Mechanical Loading: Part II – Numerical Analysis

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The objective of this study was to investigate pore shape effect on resistance to compression of open porosity lattice structures obtained with 3D printing. To...

Effect of Pore Architecture of 3D Printed Open Porosity Cellular Structures on Their Resistance to Mechanical Loading: Part II – Numerical Analysis

Publié en ligne: 25 juil. 2024

Pages: 427 - 433

Reçu: 15 juin 2023

Accepté: 17 nov. 2023

DOI: https://doi.org/10.2478/ama-2024-0047

Mots clés
lattice structures, symmetry, 3D printing, porous elements, compression, finite element method

© 2024 Mehmet Aladag et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Effect of Pore Architecture of 3D Printed Open Porosity Cellular Structures on Their Resistance to Mechanical Loading: Part II – Numerical Analysis

Publié en ligne: 25 juil. 2024

Pages: 427 - 433

Reçu: 15 juin 2023

Accepté: 17 nov. 2023

DOI: https://doi.org/10.2478/ama-2024-0047

Mots cléslattice structures, symmetry, 3D printing, porous elements, compression, finite element method

© 2024 Mehmet Aladag et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
lattice structures, symmetry, 3D printing, porous elements, compression, finite element method