<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Our study involved a combination of practical experiments and numerical simulations using the Abaqus computational software. The main aim was to enhance our understanding of the mechanical characteristics exhibited by 6082 aluminium alloy when exposed to tensile forces. To achieve this, we produced 18 samples of standardized dimensions utilizing a parallel lathe. These samples then underwent a thermal treatment comprising a solution treatment, water quenching and various tempering procedures at different temperatures (280°C, 240°C, 200°C, 160°C and 120°C), resulting in a range of hardness levels. To obtain the experimental results, we conducted tensile tests on a specialized machine, which were subsequently supplemented with numerical analyses. By adopting this approach, we gained valuable insights into the behaviour of aluminium alloy 6082, specifically regarding its mechanical properties such as hardness, tensile strength, elongation and necking coefficient. This newfound knowledge holds potential significance in the realm of designing and optimizing aluminium structures that operate within high-temperature environments.</p>
</abstract>

Our study involved a combination of practical experiments and numerical simulations using the Abaqus computational software. The main aim was to enhance our understanding of the mechanical characteristics exhibited by 6082 aluminium alloy when exposed to tensile forces. To achieve this, we produced 18 samples of standardized dimensions utilizing a parallel lathe. These samples then underwent a thermal treatment comprising a solution treatment, water quenching and various tempering procedures at different temperatures (280°C, 240°C, 200°C, 160°C and 120°C), resulting in a range of hardness levels. To obtain the experimental results, we conducted tensile tests on a specialized machine, which were subsequently supplemented with numerical analyses. By adopting this approach, we gained valuable insights into the behaviour of aluminium alloy 6082, specifically regarding its mechanical properties such as hardness, tensile strength, elongation and necking coefficient. This newfound knowledge holds potential significance in the realm of designing and optimizing aluminium structures that operate within high-temperature environments.

Normal Temperature Mechanical Properties of 6082 Aluminium Alloy as a Function of Tempering Temperature: Experimental and Numerical Approach

Mechanical Department, Faculty of Technology

Materials and Structural Mechanics Laboratory (LMMS)

Laboratoire de Matériaux, et Mécanique des Structures (LMMS)

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Our study involved a combination of practical experiments and numerical simulations using the Abaqus computational software. The main aim was to enhance our...

Normal Temperature Mechanical Properties of 6082 Aluminium Alloy as a Function of Tempering Temperature: Experimental and Numerical Approach

Publié en ligne: 17 juil. 2024

Pages: 385 - 392

Reçu: 24 mai 2023

Accepté: 17 nov. 2023

DOI: https://doi.org/10.2478/ama-2024-0042

Mots clés
6082 Aluminium alloy, quenching and tempering, hardness, tensile strength

© 2024 Abdelmalek Elhadi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Normal Temperature Mechanical Properties of 6082 Aluminium Alloy as a Function of Tempering Temperature: Experimental and Numerical Approach

Publié en ligne: 17 juil. 2024

Pages: 385 - 392

Reçu: 24 mai 2023

Accepté: 17 nov. 2023

DOI: https://doi.org/10.2478/ama-2024-0042

Mots clés6082 Aluminium alloy, quenching and tempering, hardness, tensile strength

© 2024 Abdelmalek Elhadi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
6082 Aluminium alloy, quenching and tempering, hardness, tensile strength