<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This article presents passive safety issues of a buggy-type car. The issue has been presented in the context of the dynamic impact analysis of the aluminium frame of the vehicle into a rigid wall. The study was conducted using the finite element method in the Abaqus® software. With regard to numerical calculations, a dynamic impact simulation was performed, which defined the critical areas of the structure. Numerical analysis allowed to obtain both the state of the strain of the frame structure and the characteristics of the construction work during the impact. The results of the research provide high-quality prepared FEM model.</p></abstract>

This article presents passive safety issues of a buggy-type car. The issue has been presented in the context of the dynamic impact analysis of the aluminium frame of the vehicle into a rigid wall. The study was conducted using the finite element method in the Abaqus® software. With regard to numerical calculations, a dynamic impact simulation was performed, which defined the critical areas of the structure. Numerical analysis allowed to obtain both the state of the strain of the frame structure and the characteristics of the construction work during the impact. The results of the research provide high-quality prepared FEM model.

Passive Safety of a Buggy-Type Car in the Aspect of a Dynamic Analysis of the Frame

Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

This article presents passive safety issues of a buggy-type car. The issue has been presented in the context of the dynamic impact analysis of the aluminium...

Passive Safety of a Buggy-Type Car in the Aspect of a Dynamic Analysis of the Frame

Publié en ligne: 25 juil. 2019

Pages: 75 - 79

Reçu: 04 oct. 2018

Accepté: 30 avr. 2019

DOI: https://doi.org/10.2478/ama-2019-0010

Mots clés
Passive Safety, Finite Element Method, Dynamic Impact Analysis, Overload, Abaqus

© 2019 Patryk Różyło, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Passive Safety of a Buggy-Type Car in the Aspect of a Dynamic Analysis of the Frame

Publié en ligne: 25 juil. 2019

Pages: 75 - 79

Reçu: 04 oct. 2018

Accepté: 30 avr. 2019

DOI: https://doi.org/10.2478/ama-2019-0010

Mots clésPassive Safety, Finite Element Method, Dynamic Impact Analysis, Overload, Abaqus

© 2019 Patryk Różyło, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
Passive Safety, Finite Element Method, Dynamic Impact Analysis, Overload, Abaqus