[1. Adamowicz A. (2016a), Finite element analysis of the 3D thermal stress state in a brake disk, Journal of Theoretical and Applied Mechanics, 54(1), 205–218.10.15632/jtam-pl.54.1.205]Search in Google Scholar
[2. Adamowicz A. (2016b), Thermal stressed state of a disk in the process of multiple braking, Materials Science, 51(6), 814–820.10.1007/s11003-016-9906-4]Search in Google Scholar
[3. Avallone E.A., Baumeister T., Sadegh A.M. (2007), Marks Handbook for Mechanical Engineers, McGraw-Hill, New York.]Search in Google Scholar
[4. Bijwe J., Nidhi N., Satapathy B.K. (2006), Influence of amount of resin on fade and recovery behavior of non-asbestos organic (NAO) friction material, Tribology Letters, 23(3), 215–222.10.1007/s11249-006-9055-2]Search in Google Scholar
[5. Bijwe N.J. (2007), NBR-modified resin in fade and recovery module in nonasbestos organic (NAO) friction materials. Tribology Letters, 27, 189–196.10.1007/s11249-007-9225-x]Search in Google Scholar
[6. Blau P.J. (2001), Compositions, functions and testing of friction brake materials and their additives, Oak Ridge national laboratory report, US Department of Energy (no. 19), Tenessee.10.2172/788356]Search in Google Scholar
[7. Blau P.J., McLaughlin J.C. (2003), Effect of water films and sliding speed on the frictional behavior of truck disc brake materials, Tribology International, 36, 709–715.10.1016/S0301-679X(03)00026-4]Search in Google Scholar
[8. Borawski A. (2016), Suggested research method for testing selected tribological properties of friction components in vehicle braking systems, Acta Mechanica et Automatica,10(3), 223–226.10.1515/ama-2016-0034]Search in Google Scholar
[9. Borawski A. (2018), Simulation studies of passenger car brake system elements heating process under various braking parameters, Proceedings of 23nd International Conference MECHANIKA-2018, 58–61.]Search in Google Scholar
[10. Carey V.P., Chen G., Grigoropoulos C., Kaviany M., Majumdar A. (2008), A review of heat transfer physics, Nanoscale and Microscale Thermophysical Engineering, 12(1), 1–60.10.1080/15567260801917520]Search in Google Scholar
[11. Česnavičius R., Kilikevičius S., Krasauskas P., Dundulis R., Olišauska H. (2016), Research of the friction stir welding process of aluminium alloys, Mechanika, 22(4), 291–296.10.5755/j01.mech.22.4.16167]Search in Google Scholar
[12. Chandgude S.B., Ganiger S.G. (2016), Review on development of composite material for disc brake pad, Journal of Emerging Technologies and Innovative Research, 3(5), 63–65.]Search in Google Scholar
[13. Dundulis R., Krasauskas P., Kilikevičius S. (2012), Modelling and simulation of strength and damping of the support pillar welded by longitudinal weld, Mechanika,18(2), 135–140.10.5755/j01.mech.18.2.1575]Search in Google Scholar
[14. Grzes P. (2017), Determination of the maximum temperature at single braking from the FE solution of heat dynamics of friction and wear system of equations, Numerical Heat Transfer. Part A-Applications, 71(7), 737–753.10.1080/10407782.2017.1308711]Search in Google Scholar
[15. Kamiński Z. (2013), Experimental and numerical studies of mechanical subsystem for simulation of agricultural trailer air braking systems, International Journal of Heavy Vehicle Systems, 20(4), 289–311.10.1504/IJHVS.2013.056802]Search in Google Scholar
[16. Kilikevičius S., Česnavičius R., Krasauskas P., Dundulis R., Jaloveckas J. (2016), Experimental investigation and numerical simulation of the friction stir spot welding process, Mechanika, 22(1), 59–64.10.5755/j01.mech.22.1.14243]Search in Google Scholar
[17. Kulikowski K., Szpica D. (2014). Determination of directional stiffnesses of vehicels’tires under a static load operation, Maintenance and Reliability, 16(1), 66–72.]Search in Google Scholar
[18. Maluf O., Angeloni M., Milan M.T., Spinelli D., Waldek W., Bose F. (2007), Development of materials for automotive disc brakes, Minerva, 4(2), 149–158.]Search in Google Scholar
[19. Richardson J.M., Coulson J.F. (1999), Chemical Engineering Vol. 1: Fluid Flow, Heat Transfer and Mass Transfer, The Bath Press.]Search in Google Scholar
[20. Ścieszka S. F. (1998), Friction brakes – material, structural and tribological problems, ITE, Radom.]Search in Google Scholar
[21. Szpica D. (2015a), Fuel dosage irregularity of LPG pulse vapor injectors at different stages of wear, Mechanika, 22(1), 44–50.10.5755/j01.mech.22.1.13190]Search in Google Scholar
[22. Szpica D. (2015b), Simplified numerical simulation as the base for throttle flow characteristics designation, Mechanika, 21(2), 129–133.10.5755/j01.mech.21.2.8850]Search in Google Scholar
[23. Talati F., Jalalifar S. (2009), Analysis of heat conduction in a disk brake system, Heat Mass Transfer, 45, 1047–1059.10.1007/s00231-009-0476-y]Search in Google Scholar
[24. Varinauskas V., Diliūnas S., Kubilius M., Kubilius R. (2013), Influence of cantilever length on stress distribution in fixation screws of All - on - 4 full - arch bridge, Mechanika, 19(3), 260–263.10.5755/j01.mech.19.3.3614]Search in Google Scholar
[25. Walliman N. (2010), Research Methods: The Basics, Routledge, London.10.4324/9780203836071]Search in Google Scholar
[26. Yan W., O’Dowd N.P., Busso E.P. (2002), Numerical study of sliding wear caused by a loaded pin on a rotating disc, Journal of the Mechanics and Physics of Solids, 50, 449–470.10.1016/S0022-5096(01)00093-X]Search in Google Scholar
[27. Yevtushenko A.A., Borawski A. (2018), Influence of exploitation period on selected tribological properties of brake pads (in Russian), Journal of Friction and Wear, in print.]Search in Google Scholar
[28. Yevtushenko A.A., Grzes P. (2015), 3D FE model of frictional heating andwearwith a mutual influence of the sliding velocity and temperature in a disc brake, International Communications in Heat and Mass Transfer, 62, 37–44.10.1016/j.icheatmasstransfer.2015.01.005]Search in Google Scholar
[29. Yevtushenko A.A., Kuciej M., Grzes P., Wasilewski P. (2017), Temperature in the railway disc brake at a repetetive short-term mode of braking, International Communications in Heat and Mass Transfer, 84, 102–109.10.1016/j.icheatmasstransfer.2017.04.007]Search in Google Scholar