<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Buckling and postbuckling behaviour of thin-walled channel section beam made of epoxy-glass composite have been considered. The beams under analysis was subjected to pure bending. The main aim was check the influence of ply arrangement on buckling load and postbuckling behaviour and validate the authors analytical-numerical method by commercial finite element method software. Mentioned analytical-numerical method has been developed for more than 25 years in Department of Strength of Materials. This method uses asymptotic Koiter theory for conservative systems in the second order approximation modified by Byskov and Hutchinson. Additionally, using the finite element method software the influence of ply arrangement on failure load were checked.</p></abstract>

Buckling and postbuckling behaviour of thin-walled channel section beam made of epoxy-glass composite have been considered. The beams under analysis was subjected to pure bending. The main aim was check the influence of ply arrangement on buckling load and postbuckling behaviour and validate the authors analytical-numerical method by commercial finite element method software. Mentioned analytical-numerical method has been developed for more than 25 years in Department of Strength of Materials. This method uses asymptotic Koiter theory for conservative systems in the second order approximation modified by Byskov and Hutchinson. Additionally, using the finite element method software the influence of ply arrangement on failure load were checked.

THIN-WALLED EPOXY-GLASS FIBRE BEAMS SUBJECTED TO PURE BENDING

Mechanical Engineering Faculty, Department of Strength of Materials, Lodz University of Technology, ul. Stefanowskiego 1/15, 90-924 Lódź, Poland

Acta Mechanica et Automatica

{"article-title":"THIN-WALLED EPOXY-GLASS FIBRE BEAMS SUBJECTED TO PURE BENDING"}

Buckling and postbuckling behaviour of thin-walled channel section beam made of epoxy-glass composite have been considered. The beams under analysis was...

THIN-WALLED EPOXY-GLASS FIBRE BEAMS SUBJECTED TO PURE BENDING

Publié en ligne: 31 déc. 2013

Pages: 83 - 88

DOI: https://doi.org/10.2478/ama-2013-0015

This content is open access.