A Methodology and Information System for Computing and Optimization of Impellers and Vanned Diffusers Geometry Parameters

[1] H. Xie, M. Song, X. Liu, B. Yang, and C. Gu, “Research on the simplified design of a centrifugal compressor impeller based on meridional plane modification,” Applied Sciences, vol. 8, no. 8, pp. 1‒16, Aug. 2018, Art no. 1339. https://doi.org/10.3390/app8081339 Search in Google Scholar

[2] S. Mishra, S. Abdallah, and M. Turner, “Flow characteristics of a novel centrifugal compressor design,” in Proceedings of ASME Turbo Expo 2016, GT2016, Vol. 2D: Turbomachinery, Seoul, South Korea, June 2016, pp. 1–12. https://doi.org/10.1115/GT2016-58103 Search in Google Scholar

[3] J.-H. Kim, J.-H. Choi, and K.-Y. Kim, “Surrogate modeling for optimization of a centrifugal compressor impeller,” International Journal of Fluid Machinery and Systems, vol. 3, no. 1, pp. 29–38, 2010. https://doi.org/10.5293/IJFMS.2010.3.1.029 Search in Google Scholar

[4] J. Chen, G. Xiao, M. L. Ferrari, T. Yang, M. Ni, and K. Cen, “Dynamic simulation of a solar-hybrid microturbine system with experimental validation of main parts,” Journal Pre-proof Renewable Energy, vol. 154, pp. 187–200, Jul. 2019. https://doi.org/10.1016/j.renene.2019.11.022 Search in Google Scholar

[5] M. Mojaddam and K. R. Pullen, “Optimization of a centrifugal compressor using the design of experiment technique,” Applied Sciences, vol. 9, no. 2, 2019, Art no. 291. https://doi.org/10.3390/app9020291 Search in Google Scholar

[6] S. K. Cho, S. J. Bae, Y. Jeong, J. Lee, and J. I. Lee, “Direction for high-performance supercritical CO₂ centrifugal compressor design for dry cooled supercritical CO₂ Brayton cycle,” Applied Sciences, vol. 9, no. 19, 2019, Art no. 4057. https://doi.org/10.3390/app9194057 Search in Google Scholar

[7] J. M. Sorokes and M. J. Kuzdzal, “Centifugal compressor evolution,” in Proceedings of the 47^th Turbomachinery & 34^th Pump Symposia, George R. Brown Convention Centre, USA, Sep. 2018, pp. 1–23. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://oaktrust.library.tamu.edu/bitstream/handle/1969.1/175017/05_Sorokes.pdf?sequence=1&isAllowed=y Search in Google Scholar

[8] S. Pakle and K. Jiang, “Design of a high-performance centrifugal compressor with new surge margin improvement technique for high speed turbomachinery,” Propulsion and Power Research, vol. 7, no. 1, pp. 19–29, Mar. 2019. https://doi.org/10.1016/j.jppr.2018.02.004 Search in Google Scholar

[9] Y. Bousquet, N. Binder, G. Dufour, X. Carbonneau, M. Roumeas, and I. Trebinjac, “Numerical simulation of stall inception mechanisms in a centrifugal compressor with vaned diffuser,” J. Turbomach., vol. 138, no. 12. 2016, Art no. 121005. https://doi.org/10.1115/1.4033704 Search in Google Scholar

[10] A. A. Drozdov, V. I. Yaroshenko, and Y. N. Pisarev, “The geometric model of the multistage centrifugal compressor flow path in the ANSYS CFX,” in AIP Conference Proceedings, vol. 2141, no. 1, Aug. 2019, Art no. 030017. https://doi.org/10.1063/1.5122067 Search in Google Scholar

[11] A. A. Drozdov, Y. B. Galerkin, O. A. Solovyeva, K. V. Soldatova, and A. A. Ucehovscy, “Development and identification of a mathematical model of centrifugal compressor stages using the universal modeling method,” in AIP Conference Proceedings, vol. 2285, no. 1, Nov. 2020, Art no. 030057. https://doi.org/10.1063/5.0026727 Search in Google Scholar

[12] M. Heinrich and R. Schwarze, “Genetic algorithm optimization of the volute shape of a centrifugal compressor,” International Journal of Rotating Machinery, 2016, Art no. 4849025. https://doi.org/10.1155/2016/4849025 Search in Google Scholar

[13] Y. Wan, J. Guan, and S. Xu, “Improved empirical parameters design method for centrifugal compressor in PEM fuel cell vehicle application,” International Journal of Hydrogen Energy, vol. 42, no. 8, pp. 5590–5605, Feb. 2017. https://doi.org/10.1016/j.ijhydene.2016.08.162 Search in Google Scholar

[14] A. Meroni, B. Zühlsdorf, B. Elmegaard, and F. Haglind, “Design of centrifugal compressors for heat pump systems,” Applied Energy, vol. 232, pp. 139–156, 2018. https://doi.org/10.1016/j.apenergy.2018.09.210 Search in Google Scholar

[15] E. I. Gltierrez Velasquez, “Determination of a suitable set of loss models for centrifugal compressor performance prediction,” Chinese Journal of Aeronautics, vol. 30, no. 5, pp. 1644–1650, Oct. 2017. https://doi.org/10.1016/j.cja.2017.08.002 Search in Google Scholar

[16] H. Kang and Y. Kim, “Optimal design of impeller for centrifugal compressor under the influence of one-way fluid-structure interaction,” Journal of Mechanical Science and Technology, vol. 30. pp. 3953–3959, Sep. 2016. https://doi.org/10.1007/s12206-016-0807-0 Search in Google Scholar

[17] A. Iranzo, “CFD applications in energy engineering research and simulation: an introduction to published reviews,” vol.7, no. 12, Nov. 2019, Art no. 883. https://doi.org/10.3390/pr7120883 Search in Google Scholar

[18] Y. Kondratenko, V. Korobko, O. Korobko, and O. Gerasin, “Pulse-phase control system for temperature stabilization of thermoacoustic engine model driven by the waste heat energy,” in Proceedings of the 2015 IEEE 8th International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), vol. 1, Poland, Sep. 2016, pp. 58–61. https://doi.org/10.1109/IDAACS.2015.7340701 Search in Google Scholar

[19] M. Taranov, J. Rudolph, C. Wolf, Y. Kondratenko, and O. Gerasin, “Advanced approaches to reduce number of actors in a magnetically-operated wheel-mover of a mobile robot,” in Proceedings of the 2017 13th International Conference Perspective Technologies and Methods in MEMS Design (MEMSTECH), Lviv, Ukraine, Apr. 2017. pp. 96–100. https://doi.org/10.1109/MEMSTECH.2017.7937542 Search in Google Scholar

[20] O. Gerasin, Y. Zaporozhets, and Y. Kondratenko, “Models of magnetic driver interaction with ferromagnetic surface and geometric data computing for clamping force localization patches,” in Proceedings of the IEEE Second International Conference on Data Stream Mining & Processing, Lviv, Ukraine, Aug. 2018, pp. 44–49. https://doi.org/10.1109/DSMP.2018.8478623 Search in Google Scholar

[21] Y. Kondratenko, Y. Zaporozhets, J. Rudolph, O. Gerasin, A. Topalov, and O. Kozlov, “Features of clamping electromagnets using in wheel mobile robots and modeling of their interaction with ferromagnetic plate,” in Proceedings of the 2017 IEEE 9th International Conference Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Bucharest, Romania, Sep. 2018, pp. 453–458. https://doi.org/10.1109/IDAACS.2017.8095122 Search in Google Scholar

[22] Y. Kondratenko, Y. Zaporozhets, J. Rudolph, O. Gerasin, A. Topalov, O. Kozlov, and Y. Kondratenko, “Modeling of clamping magnets interaction with ferromagnetic surface for wheel mobile robots,” International Journal of Computing, vol. 17, no. 1, pp. 33–46, 2018. https://doi.org/10.47839/ijc.17.1.947 Search in Google Scholar

[23] Y. Kondratenko, A. Topalov, and O. Gerasin, “Analysis and modeling of the slip signals’ registration processes based on sensors with multicomponent sensing elements,” in Proceedings of the 13th Int. conf. CADSM 2015, Lviv, Ukraine, Feb. 2015, pp. 109–112. https://doi.org/10.1109/CADSM.2015.7230810 Search in Google Scholar

[24] Y. Kondratenko, O. Korobko, O. Kozlov, O. Gerasin, and A. Topalov, “PLC based system for remote liquids level control with radar sensor,” in Proceedings of the 2015 IEEE 8th International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Warsaw, Poland, Sep. 2015, pp. 47–52. https://doi.org/10.1109/IDAACS.2015.7340699 Search in Google Scholar

[25] O. S. Gerasin, O. V. Kozlov, G. V. Kondratenko, J. Rudolph, and Y. P. Kondratenko, “Neural controller for mobile multipurpose caterpillar robot,” in Proceedings of the 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), vol. 1, Metz, France, Sep. 2019, pp. 222–227. https://doi.org/10.1109/IDAACS.2019.8924321 Search in Google Scholar

[26] Y. P. Kondratenko, O. V. Kozlov, O. S. Gerasin, and Y. M. Zaporozhets, “Synthesis and research of neuro-fuzzy observer of clamping force for mobile robot automatic control system,” in Proceedings of the 2016 IEEE First International Conference on Data Stream Mining & Processing (DSMP), Lviv, Ukraine, Aug. 2016, pp. 90–95. https://doi.org/10.1109/DSMP.2016.7583514 Search in Google Scholar

[27] Y. P. Kondratenko, J. Rudolph, O. V. Kozlov, Y. M. Zaporozhets, and O. S. Gerasin, “Neuro-fuzzy observers of clamping force for magnetically operated movers of mobile robots,” Technical Electrodynamics, vol. 5, pp. 53–61, 2017 (in Ukrainian). Search in Google Scholar

[28] Y. Kondratenko, O. Kozlov, and O. Gerasin, “Neuroevolutionary approach to control of complex multicoordinate interrelated plants,” International Journal of Computing, vol. 18, no. 4, pp. 502–514, Dec. 2019. https://doi.org/10.47839/ijc.18.4.1620 Search in Google Scholar

[29] Y. P. Kondratenko and O. V. Kozlov, “Generation of rule bases of fuzzy systems based on modified ant colony algorithms,” Journal of Automation and Information Sciences, vol. 51, no. 3, pp. 4–25, 2019. https://doi.org/10.1615/JAutomatInfScien.v51.i3.20 Search in Google Scholar

[30] K. Ekradi, and A. Madadi, “Performance improvement of a transonic centrifugal compressor impeller with splitter blade by three-dimensional optimization,” Energy, vol. 201, Jun. 2020, Art no. 117582. https://doi.org/10.1016/j.energy.2020.117582 Search in Google Scholar

[31] S. V. Falaleev, and M. Klusachek, Designing the Degree of a Centrifugal Compressor Using Parametric Modeling. Samara: SSAU, 2010. Search in Google Scholar

[32] O. V. Baturyn, G. I. Kolmakova, V. M. Matveev, and G. M. Popova, Design of a Centrifugal Compressor Using IOSO Optimization Technology. Samara, SSAU, 2013. Search in Google Scholar

[33] M. Schnoes, C. Voß, and E. Nicke, “Design optimization of a multi-stage axial compressor using throughflow and a database of optimal airfoils,” Journal of the Global Power and Propulsion Society, vol. 2, pp. 516–528, 2018. https://doi.org/10.22261/JGPPS.W5N91I Search in Google Scholar

[34] O. V. Komarov; T. A. Nedoshivina, and B. S. Revzin, Aircraft and Shipboard Converted Gas Turbine Engines for Ground Application. Ural University Publishing House: Yekaterinburg, Russian Federation, 2019 (in Russian). Search in Google Scholar

[35] H. Bonilla-Alvarado, K. M. Bryden, L. Shadle, D. Tucker, and P. Pezzini, “Development of real-time system identification to detect abnormal operations in a gas turbine cycle,” J. Energy Resour. Technol., vol. 142, no. 7, 2020, Art no. 070903. https://doi.org/10.1115/1.4046144 Search in Google Scholar

[36] V. M. Cherkasskiy, Pumps, Fans, Compressors, 2nd ed. Energoatomizdat: Moscow, USSR, 1984 (in Russian). Search in Google Scholar

[37] B. R. Hunt, R. L. Lipsman, and J. M. Rosenberg, Guide to MATLAB for Beginners and Experienced Users, 3rd ed. Cambridge University Press, 2014. https://doi.org/10.1017/CBO9781107338388 Search in Google Scholar

[38] Y. P. Kondratenko, O. V. Kozlov, O. S. Gerasin, A. M. Topalov, and O. V. Korobko, “Automation of control processes in specialized pyrolysis complexes based on Web SCADA systems,” in Proceedings of the 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Bucharest, Romania, Sep. 2017, pp. 107–112. https://doi.org/10.1109/IDAACS.2017.8095059 Search in Google Scholar

[39] Y. P. Kondratenko, O. V. Kozlov, A. M. Topalov, O. V. Korobko, and O.S. Gerasin, “Automation of control processes in specialized pyrolysis complexes based on industrial Internet of Things,” in Dependable IoT for Human and Industry. Modeling, Architecting, Implementation. Series in Information Science and Technology, pp. 367–387, 2018.10.1109/IDAACS.2017.8095059 Search in Google Scholar

[40] I. G. Hisameev, V. A. Maksimov, G. S. Batkis, and Ya. Z. Guzelbaev, Design and Operation of Industrial Centrifugal Compressors. Publishing house “FEN”: Kazan, 2010 (in Russian). Search in Google Scholar

[41] V. M. Simon, “Improving the performance of single- and multi-stage centrifugal compressors by coordinated regulation of the inlet blower and vane diffuser,” Power Machines, pp. 85–93, 1988 (in Russian). Search in Google Scholar

[42] N. N. Buharin, “About combined control of refrigeration centrifugal compressors,” in Improving the Efficiency of Refrigeration Machines: Collection of Scientific Papers, Lensovet LTN: Leningrad, pp. 79–88, 1982 (in Russian). Search in Google Scholar