<abstract xmlns="http://www.w3.org/1999/xhtml">

Measuring of the electromotive force in molten system is used to characterize thermodynamic properties of the system at equilibrium. Values of the electromotive force are very important for the determination of activity and standard electrode potential. Investigation of the electromotive force of Al + TiB2 and Al-Al cell was the main aim of this work leading to the characterization of acid cryolite systems. The measurements were realized using a molten aluminum electrode and the electromotive force of an electrochemical cell was investigated in electrolytes at various molar ratios (NaF/AlF3) at equilibrium. Thermodynamic properties were measured in acid cryolite melts at three different temperatures: 800 °C, 900 °C, and 1000 °C, for all experiments.
</abstract>

Measuring of the electromotive force in molten system is used to characterize thermodynamic properties of the system at equilibrium. Values of the electromotive force are very important for the determination of activity and standard electrode potential. Investigation of the electromotive force of Al + TiB2 and Al-Al cell was the main aim of this work leading to the characterization of acid cryolite systems. The measurements were realized using a molten aluminum electrode and the electromotive force of an electrochemical cell was investigated in electrolytes at various molar ratios (NaF/AlF3) at equilibrium. Thermodynamic properties were measured in acid cryolite melts at three different temperatures: 800 °C, 900 °C, and 1000 °C, for all experiments.

Thermodynamic characterization of acid cryolite systems

Department of Inorganic Technology, FCHPT

Acta Chimica Slovaca

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Thermodynamic characterization of acid cryolite systems"}

Measuring of the electromotive force in molten system is used to characterize thermodynamic properties of the system at equilibrium. Values of the...

Thermodynamic characterization of acid cryolite systems

Publié en ligne: 15 sept. 2022

Pages: 97 - 102

DOI: https://doi.org/10.2478/acs-2022-0011

Mots clés
acid cryolite melts, aluminum electrode, electromotive force, molar ratio, standard electrode potential

© 2022 Michaela Benköová et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Thermodynamic characterization of acid cryolite systems

Publié en ligne: 15 sept. 2022

Pages: 97 - 102

DOI: https://doi.org/10.2478/acs-2022-0011

Mots clésacid cryolite melts, aluminum electrode, electromotive force, molar ratio, standard electrode potential

© 2022 Michaela Benköová et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
acid cryolite melts, aluminum electrode, electromotive force, molar ratio, standard electrode potential