<abstract xmlns="http://www.w3.org/1999/xhtml"><p> In order to separate liquid mixtures, common distillation is not always suitable, especially if relative volatility of the mixture components is close to or equals unity, thus avoiding separation based on the vapor enrichment by more volatile component. To overcome this limitation of distillation, several alternatives were suggested including pressure swing and extraction distillation. Another, principally different, separation method used for the liquid mixtures separation is liquid-liquid extraction. Separation efficiency of this method is closely related to the basic extraction solvent characteristics, capacity and selectivity. In order to minimize costs connected with extraction, new extraction solvents are developed, among which ionic liquids show high potential due to their tunable properties. Here, efficiency of traditional extraction solvent, benzene, was compared to that of tetradecyltrihexylphosphonium bis(trifluoromethylsulfonyl)imide ionic liquid in separation of ethanol from its aqueous solution. The comparison was assessed on the base of results of a counter-current extractor simulation. Further, some economic aspects of this separation procedure were discussed. Optimum consumption of extraction solvent was identified taking into account alcohol-to-water molar (mass) ratio in the final extract as optimization criterion.</p></abstract>

In order to separate liquid mixtures, common distillation is not always suitable, especially if relative volatility of the mixture components is close to or equals unity, thus avoiding separation based on the vapor enrichment by more volatile component. To overcome this limitation of distillation, several alternatives were suggested including pressure swing and extraction distillation. Another, principally different, separation method used for the liquid mixtures separation is liquid-liquid extraction. Separation efficiency of this method is closely related to the basic extraction solvent characteristics, capacity and selectivity. In order to minimize costs connected with extraction, new extraction solvents are developed, among which ionic liquids show high potential due to their tunable properties. Here, efficiency of traditional extraction solvent, benzene, was compared to that of tetradecyltrihexylphosphonium bis(trifluoromethylsulfonyl)imide ionic liquid in separation of ethanol from its aqueous solution. The comparison was assessed on the base of results of a counter-current extractor simulation. Further, some economic aspects of this separation procedure were discussed. Optimum consumption of extraction solvent was identified taking into account alcohol-to-water molar (mass) ratio in the final extract as optimization criterion.

Use of ionic liquids in extraction

Institute of Chemical and Environmental Engineering, Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Radlinského 9, 812 37 Bratislava, Slovakia

Acta Chimica Slovaca

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Use of ionic liquids in extraction"}

In order to separate liquid mixtures, common distillation is not always suitable, especially if relative volatility of the mixture components is close to or...

Use of ionic liquids in extraction

Publié en ligne: 20 déc. 2014

Pages: 129 - 133

DOI: https://doi.org/10.2478/acs-2014-0022

Mots clés
ionic liquids, azeotropic mixture separation, equipment simulation, counter-current extractor, product purity

© Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Use of ionic liquids in extraction

Publié en ligne: 20 déc. 2014

Pages: 129 - 133

DOI: https://doi.org/10.2478/acs-2014-0022

Mots clésionic liquids, azeotropic mixture separation, equipment simulation, counter-current extractor, product purity

© Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
ionic liquids, azeotropic mixture separation, equipment simulation, counter-current extractor, product purity