The potential of three-dimensional printing for pediatric oral solid dosage forms

1 J. Breitkreutz and J. Boos, Paediatric and geriatric drug delivery, Expert Opin. Drug Deliv. 4 (2007) 37–45; https://doi.org/10.1517/17425247.4.1.37 Search in Google Scholar

2 G. L. Kearns, S. M. Abdel-Rahman, S. W. Alander, D. L. Blowey, J. S. Leeder and R. E. Kauffman, Developmental pharmacology – Drug disposition, action, and therapy in infants and children, N. Engl. J. Med. 349(12) (2003) 1157–1167; https://doi.org/10.1056/NEJMra035092 Search in Google Scholar

3 A. Iyire and A. R. Mohammed, Multiparticulate Systems for Paediatric Drug Delivery, in Multiparticulate Drug Delivery (Ed. A. Rajabi-Siahboomi), Springer, New York 2017, pp. 213–236. Search in Google Scholar

4 S. M. Hanning, F. L. Lopez, I. C. K. Wong, T. B. Ernest, C. Tuleu and M. Orlu Gul, Patient centric formulations for paediatrics and geriatrics: Similarities and differences, Int. J. Pharm. 512(2) (2016) 355–359; https://doi.org/10.1016/j.ijpharm.2016.03.017 Search in Google Scholar

5 K. Grießmann, J. Breitkreutz, M. Schubert-Zsilavecz and M. Abdel-Tawab, Dosing accuracy of measuring devices provided with antibiotic oral suspensions, Paediatr. Perinat. Drug Ther. 8(2) (2007) 61–70; https://doi.org/10.1185/146300907X178950 Search in Google Scholar

6 World Health Organization, Revised WHO Classification and Treatment of Pneumonia in Children at Health Facilities: Evidence Summaries: Flexible Solid Oral Dosage: Dispersible formulations of amoxicillin, World Health Organization, Geneva 2014, pp. 17. Search in Google Scholar

7 F. Liu, S. Ranmal, H. K. Batchelor, M. Orlu-Gul, T. B. Ernest, I. W. Thomas, T. Flanagan and C. Tuleu, Patient-centered pharmaceutical design to improve acceptability of medicines: Similarities and differences in paediatric and geriatric populations, Drugs 74(16) (2014) 1871–1889; https://doi.org/10.1007/s40265-014-0297-2 Search in Google Scholar

8 Y. J. Manrique-Torres, D. J. Lee, F. Islam, L. M. Nissen, J. A. Y. Cichero, J. R. Stokes and K. J. Steadman, Crushed tablets: Does the administration of food vehicles and thickened fluids to aid medication swallowing alter drug release?, J. Pharm. Pharm. Sci. 17(2) (2014) 207–219; https://doi.org/10.18433/j39w3v Search in Google Scholar

9 I. Bácskay, Z. Ujhelyi, P. Fehér and P. Arany, The evolution of the 3D-printed drug delivery systems: A review, Pharmaceutics 14(7) (2022) Article ID 1312 (30 pages); https://doi.org/10.3390/pharmaceutics14071312 Search in Google Scholar

10 C. L. Ventola, Medical applications for 3D printing: Current and projected uses, P T. 39(10) (2014) 704–711. Search in Google Scholar

11 S. Singh, M. Kumar, A. A. Doolaanea and U. K. Mandal, A recent review on 3D-printing: Scope and challenges with special focus on pharmaceutical field, Curr. Pharm. Des. 28(30) (2022) 2488–2507; https://doi.org/10.2174/1381612828666220623091629 Search in Google Scholar

12 G. Auriemma, C. Tommasino, G. Falcone, T. Esposito, C. Sardo and R. P. Aquino, Additive manufacturing strategies for personalized drug delivery systems and medical devices: Fused filament fabrication and semi solid extrusion, Molecules 27(9) (2022) Article ID 2784 (63 pages); https://doi.org/10.3390/molecules27092784 Search in Google Scholar

13 M. A. Alhnan, T. C. Okwuosa, M. Sadia, K. W. Wan, W. Ahmed and B. Arafat, Emergence of 3D printed dosage forms: Opportunities and challenges, Pharm. Res. 33(8) (2016) 1817–1832; https://doi.org/10.1007/s11095-016-1933-1 Search in Google Scholar

14 Z. Rahman, S. F. Barakh Ali, T. Ozkan, N. A. Charoo, I. K. Reddy and M. A. Khan, Additive manufacturing with 3D printing: Progress from bench to bedside, AAPS J. 20(6) (2018) Article ID 101 (14 pages); https://doi.org/10.1208/s12248-018-0225-6 Search in Google Scholar

15 R. Daly, T. S. Harrington, G. D. Martin and I. M. Hutchings, Inkjet printing for pharmaceutics – A review of research and manufacturing, Int. J. Pharm. 494(2) (2015) 554–567; https://doi.org/10.1016/j.ijpharm.2015.03.017 Search in Google Scholar

16 J. H. Kim, K. Kim and H. E. Jin, Three-dimensional printing for oral pharmaceutical dosage forms, J. Pharm. Investig. 52 (2022) 293–317; https://doi.org/10.1007/s40005-022-00561-3 Search in Google Scholar

17 A. Awad, S. J. Trenfield, S. Gaisford and A. W. Basit, 3D printed medicines: A new branch of digital healthcare, Int. J. Pharm. 548(1) (2018) 586–596; https://doi.org/10.1016/j.ijpharm.2018.07.024 Search in Google Scholar

18 M. R. P. Araújo, L. L. Sa-Barreto, T. Gratieri, G. M. Gelfuso and M. Cunha-Filho, The digital pharmacies era: How 3D printing technology using fused deposition modeling can become a reality, Pharmaceutics 11(3) (2019) Article ID 128 (14 pages); https://doi.org/10.3390/pharmaceutics11030128 Search in Google Scholar

19 G. M. Khalid and N. Billa, Solid dispersion formulations by FDM 3D Printing – A review, Pharmaceutics 14(4) (2022) Article ID 690 (23 pages); https://doi.org/10.3390/pharmaceutics14040690 Search in Google Scholar

20 L. Krueger, J. A. Miles and A. Popat, 3D printing hybrid materials using fused deposition modelling for solid oral dosage forms, J. Control. Release 351 (2022) 444–455; https://doi.org/10.1016/j.jconrel.2022.09.032 Search in Google Scholar

21 A. Konta, M. García-Piña and D. Serrano, Personalised 3D printed medicines: Which techniques and polymers are more successful?, Bioengineering 4(4) (2017) Article ID 79 (16 pages); https://doi.org/10.3390/bioengineering4040079 Search in Google Scholar

22 S. Cailleaux, N. M. Sanchez-Ballester, Y. A. Gueche, B. Bataille and I. Soulairol, Fused deposition modeling (FDM), the new asset for the production of tailored medicines, J. Control. Release 330 (2021) 821–841; https://doi.org/10.1016/j.jconrel.2020.10.056 Search in Google Scholar

23 L. Hoffmann, J. Breitkreutz and J. Quodbach, Fused deposition modeling (FDM) 3D printing of the thermo-sensitive peptidomimetic drug enalapril maleate, Pharmaceutics 14(11) (2022) Article ID 2411 (14 pages); https://doi.org/10.3390/pharmaceutics14112411 Search in Google Scholar

24 A. Goyanes, N. Allahham, S. J. Trenfield, E. Stoyanov, S. Gaisford and A. W. Basit, Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process, Int. J. Pharm. 567 (2019) Article ID 118471 (7 pages); https://doi.org/10.1016/j.ijpharm.2019.118471 Search in Google Scholar

25 J. Boniatti, P. Januskaite, L. B. da Fonseca, A. L. Viçosa, F. C. Amendoeira, C. Tuleu, A. W. Basit, A. Goyanes and M.-I. Ré, Direct powder extrusion 3D printing of praziquantel to overcome neglected disease formulation challenges in paediatric populations, Pharmaceutics 13(8) (2021) Article ID 1114 (19 pages); https://doi.org/10.3390/pharmaceutics13081114 Search in Google Scholar

26 S. A. Khaled, J. C. Burley, M. R. Alexander and C. J. Roberts, Desktop 3D printing of controlled release pharmaceutical bilayer tablets, Int. J. Pharm. 461(1–2) (2014) 105–111; https://doi.org/10.1016/j.ijpharm.2013.11.021 Search in Google Scholar

27 I. Seoane-Viaño, P. Januskaite, C. Alvarez-Lorenzo, A. W. Basit and A. Goyanes, Semi-solid extrusion 3D printing in drug delivery and biomedicine: Personalised solutions for healthcare challenges, J. Control. Release 332 (2021) 367–389; https://doi.org/10.1016/j.jconrel.2021.02.027 Search in Google Scholar

28 D. R. Serrano, A. Kara, I. Yuste, F. C. Luciano, B. Ongoren, B. J. Anaya, G. Molina, L. Diez, B. I. Ramirez, I. O. Ramirez, S. A. Sánchez-Guirales, R. Fernández-García, L. Bautista, H. K. Ruiz and A. Lalatsa, 3D Printing technologies in personalized medicine, nanomedicines, and biopharmaceuticals, Pharmaceutics 15(2) (2023) Article ID 313 (28 pages); https://doi.org/10.3390/pharmaceutics15020313 Search in Google Scholar

29 M. S. Algahtani, A. A. Mohammed and J. Ahmad, Extrusion-based 3D printing for pharmaceuticals: Contemporary research and applications, Curr. Pharm. Des. 24(42) (2018) 4991–5008; https://doi.org/10.2174/1381612825666190110155931 Search in Google Scholar

30 N. A. Charoo, S. F. Barakh Ali, E. M. Mohamed, M. A. Kuttolamadom, T. Ozkan, M. A. Khan and Z. Rahman, Selective laser sintering 3D printing – an overview of the technology and pharmaceutical applications, Drug Dev. Ind. Pharm. 46(6) (2020) 869–877; https://doi.org/10.1080/03639045.2020.1764027 Search in Google Scholar

31 F. Fina, A. Goyanes, S. Gaisford and A. W. Basit, Selective laser sintering (SLS) 3D printing of medicines, Int. J. Pharm. 529(1–2) (2017) 285–293; https://doi.org/10.1016/j.ijpharm.2017.06.082 Search in Google Scholar

32 D. Muhindo, R. Elkanayati, P. Srinivasan, M. A. Repka and E. A. Ashour, Recent advances in the applications of additive manufacturing (3D printing) in drug delivery: A comprehensive review, AAPS PharmSciTech. 24(2) (2023) Article ID 57 (22 pages); https://doi.org/10.1208/s12249-023-02524-9 Search in Google Scholar

33 O. L. Okafor-Muo, H. Hassanin, R. Kayyali and A. ElShaer, 3D printing of solid oral dosage forms: Numerous challenges with unique opportunities, J. Pharm. Sci. 109(12) (2020) 3535–3550; https://doi.org/10.1016/j.xphs.2020.08.029 Search in Google Scholar

34 Y. Wang, A. Müllertz and J. Rantanen, Additive manufacturing of solid products for oral drug delivery using binder jetting three-dimensional printing, AAPS PharmSciTech. 23(6) (2022) Article ID 196 (21 pages); https://doi.org/10.1208/s12249-022-02321-w Search in Google Scholar

35 J. Goole and K. Amighi, 3D printing in pharmaceutics: A new tool for designing customized drug delivery systems, Int. J. Pharm. 499(1–2) (2016) 376–394; https://doi.org/10.1016/j.ijpharm.2015.12.071 Search in Google Scholar

36 L. K. Prasad and H. Smyth, 3D Printing technologies for drug delivery: A review, Drug Dev. Ind. Pharm. 42(7) (2016) 1019–1031; https://doi.org/10.3109/03639045.2015.1120743 Search in Google Scholar

37 M. Kozakiewicz-Latała, K. P. Nartowski, A. Dominik, K. Malec, A. M. Gołkowska, A. Złocińska, M. Rusińska, P. Szymczyk-Ziółkowska, G. Ziółkowski, A. Górniak and B. Karolewicz, Binder jetting 3D printing of challenging medicines: From low dose tablets to hydrophobic molecules, Eur. J. Pharm. Biopharm. 170 (2022) 144–159; https://doi.org/10.1016/j.ejpb.2021.11.001 Search in Google Scholar

38 S. Y. Chang, J. Jin, J. Yan, X. Dong, B. Chaudhuri, K. Nagapudi and A. W. K. Ma, Development of a pilot-scale HuskyJet binder jet 3D printer for additive manufacturing of pharmaceutical tablets, Int. J. Pharm. 605 (2021) Article ID 120791 (11 pages); https://doi.org/10.1016/j.ijpharm.2021.120791 Search in Google Scholar

39 F. Fina, C. M. Madla, A. Goyanes, J. Zhang, S. Gaisford and A. W. Basit, Fabricating 3D printed orally disintegrating printlets using selective laser sintering, Int. J. Pharm. 541(1–2) (2018) 101–107; https://doi.org/10.1016/j.ijpharm.2018.02.015 Search in Google Scholar

40 N. Allahham, F. Fina, C. Marcuta, L. Kraschew, W. Mohr, S. Gaisford, A. W. Basit and A. Goyanes, Selective laser sintering 3D printing of orally disintegrating printlets containing ondansetron, Pharmaceutics 12(2) (2020) Article ID 10 (13 pages); https://doi.org/10.3390/pharmaceutics12020110 Search in Google Scholar

41 X. Chen, S. Wang, J. Wu, S. Duan, X. Wang, X. Hong, X. Han, C. Li, D. Kang, Z. Wang and A. Zheng, The application and challenge of binder jet 3D printing technology in pharmaceutical manufacturing, Pharmaceutics 14(12) (2022) Article ID 2589 (20 pages); https://doi.org/10.3390/pharmaceutics14122589 Search in Google Scholar

42 Z. Wang, X. Han, R. Chen, J. Li, J. Gao, H. Zhang, N. Liu, X. Gao and A. Zheng, Innovative color jet 3D printing of levetiracetam personalized paediatric preparations, Asian J. Pharm. Sci. 16(3) (2021) 374–386; https://doi.org/10.1016/j.ajps.2021.02.003 Search in Google Scholar

43 K. Kreft, Z. Lavrič, T. Stanić, P. Perhavec and R. Dreu, Influence of the binder jetting process parameters and binder liquid composition on the relevant attributes of 3D-printed tablets, Pharmaceutics 14(8) (2022) Article ID 1568 (21 pages); https://doi.org/10.3390/pharmaceutics14081568 Search in Google Scholar

44 K. Sen, T. Mehta, S. Sansare, L. Sharifi, A. W. K. Ma and B. Chaudhuri, Pharmaceutical applications of powder-based binder jet 3D printing process – A review, Adv. Drug Deliv. Rev. 177 (2021) Article ID 113943 (12 pages); https://doi.org/10.1016/j.addr.2021.113943 Search in Google Scholar

45 S. Pravin and A. Sudhir, Integration of 3D printing with dosage forms: A new perspective for modern healthcare, Biomed. Pharmacother. 107 (2018) 146–154; https://doi.org/10.1016/j.biopha.2018.07.167 Search in Google Scholar

46 P. Lakkala, S. R. Munnangi, S. Bandari and M. Repka, Additive manufacturing technologies with emphasis on stereolithography 3D printing in pharmaceutical and medical applications: A review, Int. J. Pharm. X 5 (2023) Article ID 100159 (16 pages); https://doi.org/10.1016/j.ijpx.2023.100159 Search in Google Scholar

47 X. Xu, P. Robles-Martinez, C. M. Madla, F. Joubert, A. Goyanes, A. W. Basit and S. Gaisford, Stereo-lithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction, Addit. Manuf. 33 (2020) Article ID 101071 (8 pages); https://doi.org/10.1016/j.addma.2020.101071 Search in Google Scholar

48 E. V. Blynskaya, S. V. Tishkov, K. V. Alekseev, A. A. Vetcher, A. I. Marakhova and D. T. Rejepov, Polymers in Technologies of additive and inkjet printing of dosage formulations, Polymers 14(13) (2022) Article ID 2543 (13 pages); https://doi.org/10.3390/polym14132543 Search in Google Scholar

49 M. Scarpa, S. Stegemann, W.-K. Hsiao, H. Pichler, S. Gaisford, M. Bresciani, A. Paudel and M. Orlu, Orodispersible films: Towards drug delivery in special populations, Int. J. Pharm. 523(1) (2017) 327–335; https://doi.org/10.1016/j.ijpharm.2017.03.018 Search in Google Scholar

50 M. S. Gupta, T. P. Kumar, R. Davidson, G. R. Kuppu, K. Pathak and D. V. Gowda, Printing methods in the production of orodispersible films, AAPS PharmSci.Tech. 22(3) (2021) Article ID 129 (17 pages); https://doi.org/10.1208/s12249-021-01990-3 Search in Google Scholar

51 B. Morath, S. Sauer, M. Zaradzki and A. H. Wagner, Orodispersible films – Recent developments and new applications in drug delivery and therapy, Biochem. Pharmacol. 200 (2022) Article ID 115036 (13 pages); https://doi.org/10.1016/j.bcp.2022.115036 Search in Google Scholar

52 P. Carou-Senra, J. J. Ong, B. M. Castro, I. Seoane-Viaño, L. Rodríguez-Pombo, P. Cabalar, C. Alvarez-Lorenzo, A. W. Basit, G. Pérez and A. Goyanes, Predicting pharmaceutical inkjet printing outcomes using machine learning, Int. J. Pharm. X. 5 (2023) Article ID 100181 (12 pages); https://doi.org/10.1016/j.ijpx.2023.100181 Search in Google Scholar

53 R. D. Boehm, P. R. Miller, J. Daniels, S. Stafslien and R. J. Narayan, Inkjet printing for pharmaceutical applications, Materials Today 17(5) (2014) 247–252; https://doi.org/10.1016/j.mattod.2014.04.027 Search in Google Scholar

54 H. Öblom, E. Sjöholm, M. Rautamo and N. Sandler, Towards printed pediatric medicines in hospital pharmacies: Comparison of 2D and 3D-printed orodispersible warfarin films with conventional oral powders in unit dose sachets, Pharmaceutics 11(7) (2019) Article ID 334 (33 pages); https://doi.org/10.3390/pharmaceutics11070334 Search in Google Scholar

55 M. Preis and H. Öblom, 3D-printed drugs for children – Are we ready yet?, AAPS PharmSci.Tech. 18(2) (2017) 303–308; https://doi.org/10.1208/s12249-016-0704-y Search in Google Scholar

56 T. Tagami, E. Ito, R. Kida, K. Hirose, T. Noda and T. Ozeki, 3D printing of gummy drug formulations composed of gelatin and an HPMC-based hydrogel for pediatric use, Int. J. Pharm. 594 (2021) Article ID 120118 (7 pages); https://doi.org/10.1016/j.ijpharm.2020.120118 Search in Google Scholar

57 N. Scoutaris, S. A. Ross and D. Douroumis, 3D printed “Starmix” drug loaded dosage forms for paediatric applications, Pharm. Res. 35(2) (2018) Article ID 34 (11 pages); https://doi.org/10.1007/s11095-017-2284-2 Search in Google Scholar

58 H. K. Batchelor and J. F. Marriott, Formulations for children: problems and solutions, Br. J. Clin. Pharmacol. 79(3) (2015) 405–418; https://doi.org/10.1111/bcp.12268 Search in Google Scholar

59 K. R. Mazarura, P. Kumar and Y. E. Choonara, Customized 3D printed multi-drug systems: an effective and efficient approach to polypharmacy, Expert Opin. Drug Deliv. 19(9) (2022) 1149–1163; https://doi.org/10.1080/17425247.2022.2121816 Search in Google Scholar

60 Afsana, V. Jain, N. Haider and K. Jain, 3D printing in personalized drug delivery, Curr. Pharm. Des. 24(42) (2019) 5062–5071; https://doi.org/10.2174/1381612825666190215122208 Search in Google Scholar

61 M. Bogdahn, J. Torner, J. Krause, M. Grimm and W. Weitschies, Influence of the geometry of 3D printed solid oral dosage forms on their swallowability, Eur. J. Pharm. Biopharm. 167 (2021) 65–72; https://doi.org/10.1016/j.ejpb.2021.07.009 Search in Google Scholar

62 L. Bracken, E. McDonough, S. Ashleigh, F. Wilson, J. Shakeshaft, U. Ohia, P. Mistry, H. Jones, N. Kanji, F. Liu and M. Peak, Can children swallow tablets? Outcome data from a feasibility study to assess the acceptability of different-sized placebo tablets in children (creating acceptable tablets (CAT)), BMJ Open. 10(10) (2020) e036508 (11 pages); https://doi.org/10.1136/bmjopen-2019-036508 Search in Google Scholar

63 J. Krause, L. Müller, D. Sarwinska, A. Seidlitz, M. Sznitowska and W. Weitschies, 3D printing of mini tablets for pediatric use, Pharmaceuticals 14(2) (2021) Article ID 143 (16 pages); https://doi.org/10.3390/ph14020143 Search in Google Scholar

64 S. Palekar, P. K. Nukala, S. M. Mishra, T. Kipping and K. Patel, Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen, Int. J. Pharm. 556 (2019) 106–116; https://doi.org/10.1016/j.ijpharm.2018.11.062 Search in Google Scholar

65 P. Januskaite, X. Xu, S. R. Ranmal, S. Gaisford, A. W. Basit, C. Tuleu and A. Goyanes, I spy with my little eye: A paediatric visual preferences survey of 3D printed tablets, Pharmaceutics 12(11) (2020) Article ID 1100 (16 pages); https://doi.org/10.3390/pharmaceutics12111100 Search in Google Scholar

66 A. Goyanes, C. M. Madla, A. Umerji, G. Duran Piñeiro, J. M. Giraldez Montero, M. J. Lamas Diaz, M. Gonzalez Barcia, F. Taherali, P. Sánchez-Pintos, M.-L. Couce, S. Gaisford and A. W. Basit, Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients, Int. J. Pharm. 567 (2019) Article ID 118497 (8 pages); https://doi.org/10.1016/j.ijpharm.2019.118497 Search in Google Scholar

67 W. Jamróz, J. Szafraniec, M. Kurek and R. Jachowicz, 3D printing in pharmaceutical and medical applications – Recent achievements and challenges, Pharm. Res. 35 (2018) Article ID 176 (22 pages); https://doi.org/10.1007/s11095-018-2454-x Search in Google Scholar

68 J. Yoo, T. J. Bradbury, T. J. Bebb, J. Iskra, L. Surprenant and T. G. West, Three-dimensional Printing System and Equipment Assembly, U.S. Pat. 8,888,480, 18 Nov 2014. Search in Google Scholar

69 A. G. Tabriz, M. S. Mithu, M. D. Antonijevic, L. Vilain, Y. Derrar, C. Grau, A. Morales, O. L. Katsamenis and D. Douroumis, 3D printing of LEGO^® like designs with tailored release profiles for treatment of sleep disorder, Int. J. Pharm. 632 (2023) Article ID 122574 (13 pages); https://doi.org/10.1016/j.ijpharm.2022.122574 Search in Google Scholar

70 Z. Zhang, S. Feng, A. Almotairy, S. Bandari and M. A. Repka, Development of multifunctional drug delivery system via hot-melt extrusion paired with fused deposition modeling 3D printing techniques, Eur. J. Pharm. Biopharm. 183 (2023) 102–111; https://doi.org/10.1016/j.ejpb.2023.01.004 Search in Google Scholar

71 J. dos Santos, G. S. da Silva, M. C. Velho and R. C. R. Beck, Eudragit^®: A versatile family of polymers for hot melt extrusion and 3D printing processes in pharmaceutics, Pharmaceutics 13(9) (2021) Article ID 1424 (36 pages); https://doi.org/10.3390/pharmaceutics13091424 Search in Google Scholar

72 R. Li, Y. Pan, D. Chen, X. Xu, G. Yan and T. Fan, Design, Preparation and in vitro evaluation of core-shell fused deposition modelling 3D-printed verapamil hydrochloride pulsatile tablets, Pharmaceutics 14(2) (2022) Article ID 437 (15 pages); https://doi.org/10.3390/pharmaceutics14020437 Search in Google Scholar

73 A. Maroni, A. Melocchi, F. Parietti, A. Foppoli, L. Zema and A. Gazzaniga, 3D printed multi-compartment capsular devices for two-pulse oral drug delivery, J. Control. Release 268 (2017) 10–18; https://doi.org/10.1016/j.jconrel.2017.10.008 Search in Google Scholar

74 H. Windolf, R. Chamberlain, J. Breitkreutz and J. Quodbach, 3D printed mini-floating-polypill for Parkinson’s disease: Combination of levodopa, benserazide, and pramipexole in various dosing for personalized therapy, Pharmaceutics 14(5) (2022) Article ID 931 (22 pages); https://doi.org/10.3390/pharmaceutics14050931 Search in Google Scholar

75 A. Alayoubi, A. Zidan, S. Asfari, M. Ashraf, L. Sau and M. Kopcha, Mechanistic understanding of the performance of personalized 3D-printed cardiovascular polypills: A case study of patient-centered therapy, Int. J. Pharm. 617 (2022) Article ID 121599 (13 pages); https://doi.org/10.1016/j.ijpharm.2022.121599 Search in Google Scholar

76 T. D. Reynolds, S. A. Mitchell and K. M. Balwinski, Investigation of the effect of tablet surface area/volume on drug release from hydroxypropylmethylcellulose controlled-release matrix tablets, Drug Dev. Ind. Pharm. 28(4) (2002) 457–466; https://doi.org/10.1081/ddc-120003007 Search in Google Scholar

77 H. Windolf, R. Chamberlain and J. Quodbach, Predicting drug release from 3D printed oral medicines based on the surface area to volume ratio of tablet geometry, Pharmaceutics 13(9) (2021) Article ID 1453 (22 pages); https://doi.org/10.3390/pharmaceutics13091453 Search in Google Scholar

78 A. Goyanes, P. Robles Martinez, A. Buanz, A. W. Basit and S. Gaisford, Effect of geometry on drug release from 3D printed tablets, Int. J. Pharm. 494(2) (2015) 657–663; https://doi.org/10.1016/j.ijpharm.2015.04.069 Search in Google Scholar

79 M. Cui, H. Pan, D. Fang, S. Qiao, S. Wang and W. Pan, Fabrication of high drug loading levetiracetam tablets using semi-solid extrusion 3D printing, J. Drug Deliv. Sci. Technol. 57 (2020) Article ID 101683 (9 pages); https://doi.org/10.1016/j.jddst.2020.101683 Search in Google Scholar

80 S. A. Khaled, M. R. Alexander, D. J. Irvine, R. D. Wildman, M. J. Wallace, S. Sharpe, J. Yoo and C. J. Roberts, Extrusion 3D printing of paracetamol tablets from a single formulation with tunable release profiles through control of tablet geometry, AAPS PharmSciTech. 19(8) (2018) 3403–3413; https://doi.org/10.1208/s12249-018-1107-z Search in Google Scholar

81 M. Moreira and M. Sarraguça, How can oral paediatric formulations be improved? A challenge for the XXI century, Int. J. Pharm. 590 (2020) Article ID 119905 (9 pages); https://doi.org/10.1016/j.ijpharm.2020.119905 Search in Google Scholar

82 A. G. Tabriz, D. H. G. Fullbrook, L. Vilain, Y. Derrar, U. Nandi, C. Grau, A. Morales, G. Hooper, Z. Hiezl and D. Douroumis, Personalised tasted masked chewable 3D printed fruit-chews for paediatric patients, Pharmaceutics 13(8) (2021) Article ID 1301 (14 pages); https://doi.org/10.3390/pharmaceutics13081301 Search in Google Scholar

83 T. Tracy, L. Wu, X. Liu, S. Cheng and X. Li, 3D printing: Innovative solutions for patients and pharmaceutical industry, Int. J. Pharm. 631 (2023) 122480; https://doi.org/10.1016/j.ijpharm.2022.122480 Search in Google Scholar

84 I. Seoane-Viaño, S. J. Trenfield, A. W. Basit and A. Goyanes, Translating 3D printed pharmaceuticals: From hype to real-world clinical applications, Adv. Drug Deliv. Rev. 174 (2021) 553–575; https://doi.org/10.1016/j.addr.2021.05.003 Search in Google Scholar

85 A. Awad, S. J. Trenfield, A. Goyanes, S. Gaisford and A. W. Basit, Reshaping drug development using 3D printing, Drug Discov. Today 23(8) (2018) 1547–1555; https://doi.org/10.1016/j.drudis.2018.05.025 Search in Google Scholar

86 S. J. Trenfield, A. Awad, A. Goyanes, S. Gaisford and A. W. Basit, 3D Printing pharmaceuticals: Drug development to frontline care, Trends Pharmacol. Sci. 39(5) (2018) 440–451; https://doi.org/10.1016/j.tips.2018.02.006 Search in Google Scholar

87 J. Rahman and J. Quodbach, Versatility on demand – The case for semi-solid micro-extrusion in pharmaceutics, Adv. Drug Deliv. Rev. 172 (2021) 104–126; https://doi.org/10.1016/j.addr.2021.02.013 Search in Google Scholar

88 V. L. Tiase, W. Hull, M. M. McFarland, K. A. Sward, G. Del Fiol, C. Staes, C. Weir and M. R. Cummins, Patient-generated health data and electronic health record integration: Protocol for a scoping review, BMJ Open 9(12) (2019) e033073 (5 pages); https://doi.org/10.1136/bmjopen-2019-033073 Search in Google Scholar

89 C. Petersen, Use of patient-generated health data for shared decision-making in the clinical environment: Ready for prime time, mHealth 7 (2021) Article ID 39 (3 pages); https://doi.org/10.21037/mhealth.2020.03.05 Search in Google Scholar

90 G. T. Tucker, Personalized drug dosage – closing the loop, Pharm. Res. 34(8) (2017) 1539–1543; https://doi.org/10.1007/s11095-016-2076-0 Search in Google Scholar

91 A. A. Kawu, L. Hederman, J. Doyle and D. O’Sullivan, Patient generated health data and electronic health record integration, governance and socio-technical issues: A narrative review, Inform. Med. Unlocked 37 (2023) Article ID 101153 (12 pages); https://doi.org/10.1016/j.imu.2022.101153 Search in Google Scholar

92 V. L. Tiase, K. A. Sward, G. Del Fiol, C. Staes, C. Weir and M. R. Cummins, Patient-generated health data in pediatric asthma: Exploratory study of providers’ information needs, JMIR Pediatr. Parent. 4(1) (2021) e25413 (8 pages); https://doi.org/10.2196/25413 Search in Google Scholar

93 D. Cadillo Chandler and M. Salmi, Law and Technology of 3D Printing and Medical Devices, in 3D Printing, Intellectual Property and Innovation: Insights from Law and Technology (Ed. R. M. Ballardini, M. Norrgård, J. Partanen), Kluwer Law International, Alphen aan den Rijn 2017, pp. 149–168. Search in Google Scholar

94 D. Karalia, A. Siamidi, V. Karalis and M. Vlachou, 3D-printed oral dosage forms: Mechanical properties, computational approaches and applications, Pharmaceutics 13(9) (2021) Article ID 1401 (37 pages); https://doi.org/10.3390/pharmaceutics13091401 Search in Google Scholar

95 H. Amekyeh, F. Tarlochan and N. Billa, Practicality of 3D printed personalized medicines in therapeutics, Front. Pharmacol. 12 (2021) Article ID 646836 (15 pages); https://doi.org/10.3389/fphar.2021.646836 Search in Google Scholar

96 L. A. Melnyk and M. O. Oyewumi, Integration of 3D printing technology in pharmaceutical compounding: Progress, prospects, and challenges, Ann. 3D Print. Med. 4 (2021) Article ID 100035 (9 pages)100035; https://doi.org/10.1016/j.stlm.2021.100035 Search in Google Scholar

97 M. Alomari, F. H. Mohamed, A. W. Basit and S. Gaisford, Personalised dosing: Printing a dose of one’s own medicine, Int. J. Pharm. 494(2) (2015) 568–577; https://doi.org/10.1016/j.ijpharm.2014.12.006 Search in Google Scholar

98 O. Goh, W. Goh, S. Lim, G. Hoo, R. Liew and T. Ng, Preferences of healthcare professionals on 3D-printed tablets: A pilot study, Pharmaceutics 14(7) (2022) Article ID 1521 (15 pages); https://doi.org/10.3390/pharmaceutics14071521 Search in Google Scholar

99 Y. E. Choonara, L. C. du Toit, P. Kumar, P. P. D. Kondiah and V. Pillay, 3D-printing and the effect on medical costs: a new era?, Expert Rev. Pharmacoecon. Outcomes Res. 16(1) (2016) 23–32; https://doi.org/10.1586/14737167.2016.1138860 Search in Google Scholar

100 W. K. Hsiao, B. Lorber, H. Reitsamer and J. Khinast, 3D printing of oral drugs: A new reality or hype?, Expert Opin. Drug Deliv. 15(1) (2018) 1–4; https://doi.org/10.1080/17425247.2017.1371698 Search in Google Scholar

101 United States Food and Drug Administration, Technical Considerations for Additive Manufactured Medical Devices: Guidance for Industry and Food and Drug Administration Staff, December 2017; https://www.fda.gov/media/97633/download; last access date May 16, 2023. Search in Google Scholar

102 S. Mohapatra, R. K. Kar, P. K. Biswal and S. Bindhani, Approaches of 3D printing in current drug delivery, Sensors International. 3 (2022) Article ID 100146 (10 pages); https://doi.org/10.1016/j.sintl.2021.100146 Search in Google Scholar

103 S. Wang, X. Chen, X. Han, X. Hong, X. Li, H. Zhang, M. Li, Z. Wang and A. Zheng, A review of 3D printing technology in pharmaceutics: Technology and applications, now and future, Pharmaceutics 15(2) (2023) Article ID 416 (29 pages); https://doi.org/10.3390/pharmaceutics15020416 Search in Google Scholar

104 A. Bhargav, Regulatory framework in 3D printing, J. 3D Print. Med. 1(4) (2017) 213–214; https://doi.org/10.2217/3dp-2017-0014 Search in Google Scholar

105 S. H. Lim, H. Kathuria, J. J. Y. Tan and L. Kang, 3D printed drug delivery and testing systems – a passing fad or the future?, Adv. Drug Deliv. Rev. 132 (2018) 139–168; https://doi.org/10.1016/j.addr.2018.05.006 Search in Google Scholar

106 M. Cui, H. Pan, Y. Su, D. Fang, S. Qiao, P. Ding and W. Pan, Opportunities and challenges of three-dimensional printing technology in pharmaceutical formulation development, Acta Pharm. Sin. B. 11(8) (2021) 2488–2504; https://doi.org/10.1016/j.apsb.2021.03.015 Search in Google Scholar

107 D. Markl, A. Zeitler, T. Rades, J. Rantanen and J. Bøtker, Toward quality assessment of 3D printed oral dosage forms, J. 3D Print. Med. 2(1) (2018) 27–33; https://doi.org/10.2217/3dp-2017-0016 Search in Google Scholar

108 M. Deon, J. dos Santos, D. F. de Andrade and R. C. R. Beck, A critical review of traditional and advanced characterisation tools to drive formulators towards the rational development of 3D printed oral dosage forms, Int. J. Pharm. 628 (2022) Article ID 122293 (22 pages); https://doi.org/10.1016/j.ijpharm.2022.122293 Search in Google Scholar

109 S. J. Trenfield, A. Awad, C. M. Madla, G. B. Hatton, J. Firth, A. Goyanes, S. Gaisford and A. W. Basit, Shaping the future: recent advances of 3D printing in drug delivery and healthcare, Expert Opin. Drug Deliv. 16(10) (2019) 1081–1094; https://doi.org/10.1080/17425247.2019.1660318 Search in Google Scholar

110 J. Norman, R. D. Madurawe, C. M. V. Moore, M. A. Khan and A. Khairuzzaman, A new chapter in pharmaceutical manufacturing: 3D-printed drug products, Adv. Drug Deliv. Rev. 108 (2017) 39–50; https://doi.org/10.1016/j.addr.2016.03.001 Search in Google Scholar

111 J. Quodbach, M. Bogdahn, J. Breitkreutz, R. Chamberlain, K. Eggenreich, A. G. Elia, N. Gottschalk, G. Gunkel-Grabole, L. Hoffmann, D. Kapote, T. Kipping, S. Klinken, F. Loose, T. Marquetant, H. Windolf, S. Geißler and T. Spitz, Quality of FDM 3D printed medicines for pediatrics: Considerations for formulation development, filament extrusion, printing process and printer design, Ther. Innov. Regul. Sci. 56(6) (2022) 910–928; https://doi.org/10.1007/s43441-021-00354-0 Search in Google Scholar

112 G. Pitzanti, E. Mathew, G. P. Andrews, D. S. Jones and D. A. Lamprou, 3D Printing: an appealing technology for the manufacturing of solid oral dosage forms, J. Pharm. Pharmacol. 74(10) (2022) 1427–1449; https://doi.org/10.1093/jpp/rgab136 Search in Google Scholar

113 B. Bornkamp, F. Bretz, A. Dmitrienko, G. Enas, B. Gaydos, C.-H. Hsu, F. König, M. Krams, Q. Liu, B. Neuenschwander, T. Parke, J. Pinheiro, A. Roy, R. Sax and F. Shen, Innovative approaches for designing and analyzing adaptive dose-ranging trials, J. Biopharm. Stat. 17(6) (2007) 965–995; https://doi.org/10.1080/10543400701643848 Search in Google Scholar

114 J. A. Quinlan and M. Krams, Implementing adaptive designs: Logistical and operational considerations, Ther. Innov. Regul. Sci. 40 (2006) 437–444; https://doi.org/10.1177/216847900604000409 Search in Google Scholar

115 R. Parhi and G. K. Jena, An updated review on application of 3D printing in fabricating pharmaceutical dosage forms, Drug Deliv. Transl. Res. 12(10) (2022) 2428–2462; https://doi.org/10.1007/s13346-021-01074-6 Search in Google Scholar