<abstract xmlns="http://www.w3.org/1999/xhtml">

Poland's mixed municipal waste management system has been based on mechanical-biological treatment (MBT). One of the MBT processes is the biological stabilisation of fractions of less than 80 mm. The final product after biological stabilisation is a stabiliser that, once the conditions required by law are met, can be landfilled. The stabilizer must meet the following requirements: the loss of ignition (LOI) of the stabiliser is less than 35% DM, the organic carbon content is less than 20% DM and the AT4 value (aerobic 4-day respiration test) value is less than 10 mgO2/g DM. The study aimed to analyse the changes that occurred during the first 4 weeks of biological processing of the fraction of less than 80 mm of mixed municipal waste. The bioreactor feedstock consisted of 41.7% organic fraction (OF), the LOI was 32.3%, and the AT4 value was 45.7 mgO2/g DM. During biological processing, at 4 weeks, the loss of OF in the total weight of the waste was found to be 22.6%, the losses after roasting decreased by almost 90% and the value of AT4 was 6.6 mgO2/g DM. This means that the stabiliser already after 4 weeks, according to the law, could be sent to a landfill.
</abstract>

Poland's mixed municipal waste management system has been based on mechanical-biological treatment (MBT). One of the MBT processes is the biological stabilisation of fractions of less than 80 mm. The final product after biological stabilisation is a stabiliser that, once the conditions required by law are met, can be landfilled. The stabilizer must meet the following requirements: the loss of ignition (LOI) of the stabiliser is less than 35% DM, the organic carbon content is less than 20% DM and the AT4 value (aerobic 4-day respiration test) value is less than 10 mgO2/g DM. The study aimed to analyse the changes that occurred during the first 4 weeks of biological processing of the fraction of less than 80 mm of mixed municipal waste. The bioreactor feedstock consisted of 41.7% organic fraction (OF), the LOI was 32.3%, and the AT4 value was 45.7 mgO2/g DM. During biological processing, at 4 weeks, the loss of OF in the total weight of the waste was found to be 22.6%, the losses after roasting decreased by almost 90% and the value of AT4 was 6.6 mgO2/g DM. This means that the stabiliser already after 4 weeks, according to the law, could be sent to a landfill.

Changes in Main Parameters of Biological Stabilisation of Municipal Waste from a Full-Scale Mechanical-Biological Treatment (MBT) Installation

Institute of Agricultural Sciences, Land Management and Environmental Protection, College of Natural Sciences

Architecture, Civil Engineering, Environment

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Poland's mixed municipal waste management system has been based on mechanical-biological treatment (MBT). One of the MBT processes is the biological...

Changes in Main Parameters of Biological Stabilisation of Municipal Waste from a Full-Scale Mechanical-Biological Treatment (MBT) Installation

Publié en ligne: 20 oct. 2023

Pages: 163 - 170

Reçu: 27 juin 2023

Accepté: 04 sept. 2023

DOI: https://doi.org/10.2478/acee-2023-0043

Mots clés
Mixed municipal waste, Biological stabilisation, AT, MBT installation

© 2023 Justyna Koc-Jurczyk, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Changes in Main Parameters of Biological Stabilisation of Municipal Waste from a Full-Scale Mechanical-Biological Treatment (MBT) Installation

Publié en ligne: 20 oct. 2023

Pages: 163 - 170

Reçu: 27 juin 2023

Accepté: 04 sept. 2023

DOI: https://doi.org/10.2478/acee-2023-0043

Mots clésMixed municipal waste, Biological stabilisation, AT, MBT installation

© 2023 Justyna Koc-Jurczyk, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
Mixed municipal waste, Biological stabilisation, AT, MBT installation