This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Stachecki, K. (2022). Analiza możlwiości konwersji krzywej próbnego statycznego obciążenia pala przy zmianie jego geometrii (Analysis of pile static load test curve conversion possibilities in case of changed geometry) (PhD thesis, West Pomeranian University of Technology in Szczecin). Poland, SzczecinStacheckiK.2022Analiza możlwiości konwersji krzywej próbnego statycznego obciążenia pala przy zmianie jego geometrii (Analysis of pile static load test curve conversion possibilities in case of changed geometry)(PhD thesis, West Pomeranian University of Technology in Szczecin). Poland, SzczecinSearch in Google Scholar
Briaud, J. (2013). Geotechnical Engineering. Unsaturated and saturated soils. New Jersey: John Wiley & sons.BriaudJ.2013Geotechnical Engineering. Unsaturated and saturated soilsNew JerseyJohn Wiley & sonsSearch in Google Scholar
Hansen, J.B. (1961). A general formula for bearing capacity. Danish Geotechnical Institute Bulletin, 28, 5–11.HansenJ.B.1961A general formula for bearing capacityDanish Geotechnical Institute Bulletin28511Search in Google Scholar
Chin, F.K. (1970). Estimation of the Ultimate load of piles not carried to failure. Proceeding of 2nd Southeast Asia Conference on Soil Engineering, 81–70.ChinF.K.1970Estimation of the Ultimate load of piles not carried to failureProceeding of 2nd Southeast Asia Conference on Soil Engineering8170Search in Google Scholar
Coyle, H.M, Reese, L.C. (1966). Load transfer for axially loaded piles in clay. Journal of the Soil Mechanics and Foundation Division. ASCE., 92, 1–26.CoyleH.MReeseL.C.1966Load transfer for axially loaded piles in clayJournal of the Soil Mechanics and Foundation Division. ASCE.92126Search in Google Scholar
Dung, N.T., Kim, S.R. (2007). Comparative study between design methods and pile load tests for bearing capacity of driven PHC piles in Nakdong river delta. Journal of the Korean Geotechnical Society, 23(3), 61–75.DungN.T.KimS.R.2007Comparative study between design methods and pile load tests for bearing capacity of driven PHC piles in Nakdong river deltaJournal of the Korean Geotechnical Society2336175Search in Google Scholar
Gwizdała, K. (2010). Fundamenty Palowe (Pile foundations). Warszawa: Państwowe Wydawnictwo Naukowe.GwizdałaK.2010Fundamenty Palowe (Pile foundations)WarszawaPaństwowe Wydawnictwo NaukoweSearch in Google Scholar
Meyer, Z., Kowalow, M. (2010). Model krzywej aproksymującej wyniki testów statycznych pali (Model of curve approximating static load test results). Inżynieria Morska i Geotechnika, 3, 438–446.MeyerZ.KowalowM.2010Model krzywej aproksymującej wyniki testów statycznych pali (Model of curve approximating static load test results)Inżynieria Morska i Geotechnika3438446Search in Google Scholar
Szmechel, G. (2014). Określenie nośności granicznej pali na podstawie próbnych obciążeń statycznych w ograniczonym zakresie (Determination of the pile maximum bearing capaciy based on static load tests in limited range) (PhD thesis, West Pomeranian University of Technology in Szczecin). Poland, Szczecin.SzmechelG.2014Określenie nośności granicznej pali na podstawie próbnych obciążeń statycznych w ograniczonym zakresie (Determination of the pile maximum bearing capaciy based on static load tests in limited range)(PhD thesis, West Pomeranian University of Technology in Szczecin). Poland, Szczecin.Search in Google Scholar
Meyer, Z., Wasiluk, A. (2019). Weryfikacja krzywej Meyera-Kowalowa w oparciu o wyniki eksperymentalne oraz kolejny etap analizy niedokładności pomiarów testu statycznego pala (Verification of Meyer-Kowalow curve based on experimental test results and the next stage of the analysis of the inaccuracy of the pile static load tests). Inżynieria Morska i Geotechnika, 6, 315–323.MeyerZ.WasilukA.2019Weryfikacja krzywej Meyera-Kowalowa w oparciu o wyniki eksperymentalne oraz kolejny etap analizy niedokładności pomiarów testu statycznego pala (Verification of Meyer-Kowalow curve based on experimental test results and the next stage of the analysis of the inaccuracy of the pile static load tests)Inżynieria Morska i Geotechnika6315323Search in Google Scholar
Meyer, Z., Stachecki, K. (2020). Analysis of static load test referred to limit the bearing capacity of a pile. IOP Conference Series: Materials Science and Engineering doi: 10.1088/1757-899X/960/2/022101.MeyerZ.StacheckiK.2020Analysis of static load test referred to limit the bearing capacity of a pileIOP Conference Series: Materials Science and Engineering10.1088/1757-899X/960/2/022101Open DOISearch in Google Scholar
Meyer, Z. (2017). Wykorzystanie wyników testu statycznego pala do określenia mobilizacji oporu podstawy i pobocznicy (Using static load test results to determine mobilization of base and skin resistance) XXXII Warsztaty Pracy Projektanta Konstrukcji, 315–323.MeyerZ.2017Wykorzystanie wyników testu statycznego pala do określenia mobilizacji oporu podstawy i pobocznicy (Using static load test results to determine mobilization of base and skin resistance)XXXII Warsztaty Pracy Projektanta Konstrukcji315323Search in Google Scholar
Meyer, Z., Żarkiewicz, K. (2018). Skin and toe resistance mobilization of pile during laboratory static load test. Studia Geotechnica et Mechanica, 40(1), 1–5.MeyerZ.ŻarkiewiczK.2018Skin and toe resistance mobilization of pile during laboratory static load testStudia Geotechnica et Mechanica40115Search in Google Scholar
Żarkiewicz, K. (2017). Analiza formowania się oporu pobocznicy pala w gruntach niespoistych na podstawie modelowych badań laboratoryjnych (Analysis of pile skin resistance formation in non-cohesive soils based on model laboratory tests) (PhD thesis, West Pomeranian University of Technology in Szczecin). Poland, Szczecin.ŻarkiewiczK.2017Analiza formowania się oporu pobocznicy pala w gruntach niespoistych na podstawie modelowych badań laboratoryjnych (Analysis of pile skin resistance formation in non-cohesive soils based on model laboratory tests)(PhD thesis, West Pomeranian University of Technology in Szczecin). Poland, Szczecin.Search in Google Scholar
Meyer, Z., Stachecki, K. (2018). Static load test curve (Q-s) conversion in to pile of differnet size. Annals of Warsaw University of Life Sciences, 50(2), 171–182.MeyerZ.StacheckiK.2018Static load test curve (Q-s) conversion in to pile of differnet sizeAnnals of Warsaw University of Life Sciences502171182Search in Google Scholar
Meyer, Z., Stachecki, K. (2021). Analiza konwesrji krzywej próbnego statycznego obciążenia pala przy zmianie średnicy oraz długości (Analysis of static load test curve convesrion for a changed length and diameter). Mosty, 3, 22/25.MeyerZ.StacheckiK.2021Analiza konwesrji krzywej próbnego statycznego obciążenia pala przy zmianie średnicy oraz długości (Analysis of static load test curve convesrion for a changed length and diameter)Mosty322/25Search in Google Scholar
Meyer, Z., Siemaszko, P. (2019). Static load test curve analysis based on soil field investigations. Bulletin of Polish Academy of Sciences. Technical Sciences, 67(2), 329–337.MeyerZ.SiemaszkoP.2019Static load test curve analysis based on soil field investigations. Bulletin of Polish Academy of SciencesTechnical Sciences672329337Search in Google Scholar
Dembicki, E. (1988). Fundamentowanie. Projektowanie i wykonawstwo. Tom 2. Posadowienie budowli (Foundations. Design and execution. Vol. 2. Foundation of buildings), Arkady.DembickiE.1988Fundamentowanie. Projektowanie i wykonawstwo. Tom 2. Posadowienie budowli (Foundations. Design and execution. Vol. 2. Foundation of buildings)ArkadySearch in Google Scholar
Stachecki, K. (2020). Analiza nośności granicznej pala z wykorzystaniem wyników tesów statycznych (Analysis of pile maximum bearing capacity based on static load test results) Współczesne zagadnienia z Inżynierii lądowej, Wydawnictwo Politechniki Śląskiej, 197–203.StacheckiK.2020Analiza nośności granicznej pala z wykorzystaniem wyników tesów statycznych (Analysis of pile maximum bearing capacity based on static load test results)Współczesne zagadnienia z Inżynierii lądowej, Wydawnictwo Politechniki Śląskiej197203Search in Google Scholar