Film Thickness Measurement Of Mechanical Seal Based On Cascaded Artificial Neural Network Recognition Model

1.Sun Jianjun, Wei Long, Gu Boqing. The Development Course and The Research Trend of Mechanical Seal. Lubrication Engineering, Lubrication Engineering, Vol.4, 2004, pp.128-134. Search in Google Scholar

2G. Astridge and M. D. Longfield. Capacitance measurement and oil film thickness in a large-radius disc and ring machine, Vol.182, No.14, 1967, pp.89-96.10.1243/PIME_CONF_1967_182_410_02 Search in Google Scholar

3P. C. Chu and A. Cameron. Flow of electric current through lubricated contacts. ASLE Transactions, Vol.10, No.3, 1967, pp.226-234.10.1080/05698196708972182 Search in Google Scholar

4Etsion,I. Experimental of the dynamic behavior of non-contacting coned-face mechanical seals. ASLE Transactions, Vol.27, No.3, 1984, pp.263-270.10.1080/05698198408981570 Search in Google Scholar

5W. B. Anderson, J. Jarzynski and R. F. Salant. A condition monitor for liquid lubricated mechanical seals. Tribology Transacitions, Vol.44, No.3, 2001, pp.479-483.10.1080/10402000108982484 Search in Google Scholar

6T. Reddyhoff, R.S. Dwyer-Joyce, and P. A new approach for the measurement of film thickness in liquid face seals. Tribology Transactions, Vol.51, No.2, 2008, pp.140-149.10.1080/10402000801918080 Search in Google Scholar

7J. Miettinen and V. Siekkinen. Acoustic emission in monitoring sliding contact behaviour. Wear, Vol.183, No.2, 1995, pp.897-900.10.1016/0043-1648(95)90213-9 Search in Google Scholar

8.Cai Yanping, Li Aihua, Wang Tao,et al. Based on The EMD - Wigner Ville - internal Combustion Engine Vibration Time-frequency Analysis. Journal of Vibration Engineering, Vol.10, No.4, 2010, pp.430-437. Search in Google Scholar

9.Xu Dong. Ball Bearing Fatigue Residual Life Analysis and The Forecast Method Research. Wuhan, Doctor of Engineering thesis, National University of Defense Technology, China, 2011, pp.205. Search in Google Scholar

10Shaojiang Dong and Tianhong Lou. Bearing degradation process prediction based on the PCA and optimized LS-SVM model. Measurement, Vol.46, No.9, 2013. pp.3143-3152.10.1016/j.measurement.2013.06.038 Search in Google Scholar

11K.I. Kim, S. H. Park, and H. J. Kim. Kernel principal component analysis for texture classification. IEEE Signal Processing Letters, Vol.8, No.2, 2011, pp.39-41.10.1109/97.895369 Search in Google Scholar

12Weilin Li, Pan Fu, Weiqing Cao. Study on Feature Selection and Identification Method of Toll Wear States Based on SVM. International Journal on Smart Sensing and Intelligent Systems, Vol.6, No.2, 2013, pp.448-465.10.21307/ijssis-2017-549 Search in Google Scholar

13S.C.Mukhopadhyay, Novel Planar Electromagnetic Sensors: Modeling and Performance Evaluation, Sensors 2005, 5, 546-579, ISSN 1424-8220 © 2005 by MDPI http://www.mdpi.org/sensors, 2005.10.3390/s5120546 Search in Google Scholar

14G. S. Vijay, H.S. Kumar and N.S. Sriram et al. Evaluation of effectiveness of wavelet based denoising schemes using ANN and SVM for bearing condition classification. Computational Intelligence and Neuroscience, Vol.12, 2012, pp.46-51.10.1155/2012/582453350563923213323 Search in Google Scholar

15S.C.Mukhopadhyay, “A Novel Planar Mesh Type Micro-electromagnetic Sensor: Part I - Model Formulation”, IEEE Sensors journal, Vol. 4, No. 3, pp. 301-307, June 2004.10.1109/JSEN.2004.827206 Search in Google Scholar

16P. Sam Paul and A. S. Varadarajan. ANN assisted sensor fusion model to predict tool wear during hard turning with minimal fluid application. IJMMM, Vol.13. No.14, 2013, pp.398-413.10.1504/IJMMM.2013.054263 Search in Google Scholar

17S.C.Mukhopadhyay, “A Novel Planar Mesh Type Micro-electromagnetic Sensor: Part II – Estimation of System Properties”, IEEE Sensors journal, Vol. 4, No. 3, pp. 308-312, June 2004.10.1109/JSEN.2004.827205 Search in Google Scholar

18Benny Karunakar and D. L. Datta. Prediction of defects in castings using back propagation neural networks. IJMIC, Vol.3, No.2, 2008, pp.140-147.10.1504/IJMIC.2008.019351 Search in Google Scholar

19S.C.Mukhopadhyay, “Quality inspection of electroplated materials using planar type micro-magnetic sensors with post processing from neural network model”, IEE Proceedings – Science, Measurement and Technology, Vol. 149, No. 4, pp. 165-171, July 2002.10.1049/ip-smt:20020340 Search in Google Scholar

20Zhao Peng. Study on the vibration fault diagnosis method of centrifugal and system implementation. Doctor of Engineering thesis, North China Electric Power University(Beijing), China, 2011, P68. Search in Google Scholar