Accès libre

Hybrid Intelligent Method of Identifying Stator Resistance of Motorized Spindle

À propos de cet article

Citez

Yusheng Zhang, “The Application of Electro-spindle on CNC Machine”, Mechanical Management and Development, vol.1, 2011, pp. 137-138.Search in Google Scholar

L P Wang, H G Zhang, X H Liu, “Robust sensorless of ADRC controlled PMSM based on MRAS with stator resistance identification”, Proc. CCC 2011, pp.3575-3579, China, July 22-24, 2011.Search in Google Scholar

Junling Zhu, Qing Tian, Zuobao Tian, “Simulation analysis on stator resistance identification based on fuzzy logic”, Computer Measurement & control, vol.20,No. 8 , 2012 ,pp.2230-2232.Search in Google Scholar

Kumar R, Gupta R A, Bansal A K, “Identification and control of PMSM using ANN”, Journal of the Institution of Engineering(India):Electrical Engineering Division, vol.90, 2009, pp.20-25.Search in Google Scholar

Foo Gilbert Hock Beng,Rahman M. F., “Direct torque control of an IPM-synchronous motor drive at very low speed using a sliding-mode stator flux observer”, IEEE Transactions on Power Electronics, vol.25,No. 4 , 2010, pp.933-942.10.1109/TPEL.2009.2036354Search in Google Scholar

Barut Murat, “Bi input-extended kalman filter based estimation technique for speedsensorless control of induction motors”, Energy Conversion and Management,vol.51,No. 10, 2010, pp. 2032-2040.10.1016/j.enconman.2010.02.037Search in Google Scholar

Soltani J., Abootorabi Zarchi H,Arab Markadeh Gh R, “Stator-flux-oriented based encoderless direct torque control for synchronous reluctance machines using sliding mode approach” , World Academy of Science, Engineering and Technology.vol.58 , 2009, pp.883-889.Search in Google Scholar

Dan Xiao, Foo Gilbert,Rahman M. F, “A new combined adaptive flux observer with HF signal injection for sensorless direct torque and flux control of matrix converter fed ipmsm over a wide speed range” , Proc. ECCE 2010,pp 1859-1866, United states, September 12-16,2010.10.1109/ECCE.2010.5618149Search in Google Scholar

Foo Gilbert,Rahman M F, “Sensorless direct torque and flux-controlled IPM synchronous motor drive at very low speed without signal injection”,IEEE Transactions on Industrial Electronics, vol.57,No.1,2010 , pp.395-403.10.1109/TIE.2009.2030815Search in Google Scholar

Abjadi Navid R, Markadeh Gholamreza Arab,Soltani Jafar, “Model following sliding-mode control of a six-phase induction motor drive” ,Journal of Power Electronics, vol.10,No. 6,2010, pp. 694-701.10.6113/JPE.2010.10.6.694Search in Google Scholar

Zidani F, Diallo D, Benbouzid M E H,Naït-Saïd R, “Direct torque control of induction motor with fuzzy stator resistance adaptation” ,IEEE Transactions on Energy Conversion, vol. 21, No. 2, 2006 ,pp.619-62110.1109/TEC.2006.874251Search in Google Scholar

Zaimeddine Rabah, Berkouk E Madjid,Refoufi Larbi, “Two approaches for direct torque control using a three-level voltage source inverter with real time estimation of an induction motors stator resistance” ,Mediterranean Journal of Measurement and Control, vol.3, No. 3, 2007 , pp.134-142.Search in Google Scholar

Sayouti Yassine, Abbou Ahmed, Akherraz Mohammed,Mahmoudi Hassane, “On-line neural network stator resistance estimation in direct torque controlled induction motor drive” ,Proc. ISDA 2009,pp 988-992, Italy, November 30 - December 2, 2009.10.1109/ISDA.2009.183Search in Google Scholar

Tlemcani Abdelhalim, Bouchhida Ouahid, Benmansour Khelifa, Boudana Djamell,Boucherit Mohamed Seghir, “Direct torque control strategy (DTC) based on fuzzy logic controller for a permanent magnet synchronous machine drive” ,Journal of Electrical Engineering and Technology, vol. 4, No. 1, 2009, pp.66-78.10.5370/JEET.2009.4.1.066Search in Google Scholar

Aktas Mustafa,Ibrahim Okumus H, “Stator resistance estimation using ANN in DTC IM drives” , Turkish Journal of Electrical Engineering and Computer Sciences , vol. 18, No. 2, 2010, pp.197-210.10.3906/elk-0812-6Search in Google Scholar

Draou Azeddine,Miloudi Abdellah, “A simplified speed controller for direct torque neuro fuzzy controlled induction machine drive based on a variable gain PI controller” , Proc. PEOCO 2010, pp 533-538, Malaysia, June 23-24, 2010.10.1109/PEOCO.2010.5559235Search in Google Scholar

Rong Guo, Hong sheng Tang, Ge Zhong xue, et. al, “Application of NNPLS analysis in QSDR studies”, Computers and Applied Chemistry, vol. 26, No. 12, 2009,pp.1553-1558.Search in Google Scholar

Rui hua Li, Guo xiang Meng, Heng kun Xie,etal, “A Hybrid Prediction Approach for Stator Insulation Breakdown Voltage of Large Generator Based on PLS Combined With Artificial Neural Network”, Zhongguo Dianji Gongcheng Xuebao, vol.27, No. 3,2007,pp.100-105.Search in Google Scholar

Abdul Rahim, H. Ibrahim, F. Taib, M.N. “System identification of nonlinear autoregressive models in monitoring dengue infection” ,International Journal on Smart Sensing and Intelligent Systems, vol.3,No.4 ,2010, pp.783-806.10.21307/ijssis-2017-421Search in Google Scholar

Dey, Debangshu,Munshi, Sugata, “Simulation studies on a new intelligent scheme for relative humidity and temperature measurement using thermistors in 555 timer circuit”, International Journal on Smart Sensing and Intelligent Systems, vol. 3,No. 2, 2010, pp.217-229.10.21307/ijssis-2017-389Search in Google Scholar

G. Sen Gupta, S.C. Mukhopadhyay, S. Demidenko and C.H. Messom, “Master-slave Control of a Teleoperated Anthropomorphic Robotic Arm with Gripping Force Sensing”, IEEE Transactions on Instrumentation and Measurement, Vol. 55, No. 6, pp. 2136-2145, December 2006.Search in Google Scholar

Xiao qiang Zhu, Guo qiang Li, Ling fang Sun, etal, “Analysis of Carbon in Coal-fired Based on Partial Least Squares Regression Algorithm”, Journal of Northeast Dianli University, vol.32,No.3, 2012, pp.31-35.Search in Google Scholar

S.C. Mukhopadhyay, T.Ohji, M.Iwahara and S.Yamada, “Modeling and Control of a New Horizontal Shaft Hybrid Type Magnetic Bearing”, IEEE Transactions on Industrial Electronics, Vol. 47, No. 1, pp. 100-108, February 2000.10.1109/41.824131Search in Google Scholar

N Wang, J Xu, J Yang, “Method of identifying key quality characteristics in multistage manufacturing process based on PLSR”, Proc. ADME 2012, pp.2580-2584, China, August 16-18, 2012.Search in Google Scholar

S.C. Mukhopadhyay, T.Ohji, M.Iwahara and S.Yamada, “Design, Analysis and Control of a New Repulsive Type Magnetic Bearing”, IEE proceeding on Electric Power Applications, vol. 146, no. 1, pp. 33-40, January 1999.10.1049/ip-epa:19990203Search in Google Scholar

Cheng yuan Wang, Jia kuan Xia, Jun youYang, “Modern control technology of motor”, Mechanical industry press, China,2006.Search in Google Scholar

eISSN:
1178-5608
Langue:
Anglais
Périodicité:
Volume Open
Sujets de la revue:
Engineering, Introductions and Overviews, other