<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this study, the detecting structures in an embedded CUP wafer, which are called sensors, are investigated through a contactless sensing analysis. These novel sensing structures, which were designed using the ADS 2009 platform and the design rules for the TSMC 0.18-μm CMOS process, were placed under bonding pads. However, signals would still pass through these I/O sensing structures (i.e., ESD devices or circuits) and become coupled up to the pads of the top-layer metal as square, sinusoidal, or ESD pulse waveforms are injected. Through the resulting sensing relationship, we could then judge whether or not the bottom circuit is a good candidate for EMI consideration. Eventually, it was found that during an ESD occurred situation, a strong signal coupling can be sensed by the ESD protection circuits, especially by gate-coupled ESD protection circuitry.</p>
</abstract>

In this study, the detecting structures in an embedded CUP wafer, which are called sensors, are investigated through a contactless sensing analysis. These novel sensing structures, which were designed using the ADS 2009 platform and the design rules for the TSMC 0.18-μm CMOS process, were placed under bonding pads. However, signals would still pass through these I/O sensing structures (i.e., ESD devices or circuits) and become coupled up to the pads of the top-layer metal as square, sinusoidal, or ESD pulse waveforms are injected. Through the resulting sensing relationship, we could then judge whether or not the bottom circuit is a good candidate for EMI consideration. Eventually, it was found that during an ESD occurred situation, a strong signal coupling can be sensed by the ESD protection circuits, especially by gate-coupled ESD protection circuitry.

Signal Sensing By The Architecture Of Embedded I/O Pad Circuits

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Signal Sensing By The Architecture Of Embedded I/O Pad Circuits"}

In this study, the detecting structures in an embedded CUP wafer, which are called sensors, are investigated through a contactless sensing analysis. These...

Signal Sensing By The Architecture Of Embedded I/O Pad Circuits

Publié en ligne: 11 mars 2014

Pages: 196 - 213

Reçu: 12 nov. 2013

Accepté: 25 févr. 2014

DOI: https://doi.org/10.21307/ijssis-2017-652

© 2014 Shen-Li Chen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.