<abstract xmlns="http://www.w3.org/1999/xhtml"><p>To solve the problems of traditional wired on-line monitoring system which has lines too much, cost too high, fault diagnosing and maintaining difficulties and so on, an on-line working condition monitoring system for large electrical equipment based on wireless sensor network (WSN) is proposed, designed and implemented. CC2431 chips were used for hardware design of wireless sensor network node and base station, and the TinyOS transplanted into the sensor nodes and base stations are discussed in detail. Then, a management software system based on LabVIEW and database programming technique is proposed and implemented. The experiment results show that the system can satisfy the needs for real-time data gathering, data storage, data curve drawing, low power consumption, wide coverage, no region limitation. It’s a good operation performance.</p></abstract>

To solve the problems of traditional wired on-line monitoring system which has lines too much, cost too high, fault diagnosing and maintaining difficulties and so on, an on-line working condition monitoring system for large electrical equipment based on wireless sensor network (WSN) is proposed, designed and implemented. CC2431 chips were used for hardware design of wireless sensor network node and base station, and the TinyOS transplanted into the sensor nodes and base stations are discussed in detail. Then, a management software system based on LabVIEW and database programming technique is proposed and implemented. The experiment results show that the system can satisfy the needs for real-time data gathering, data storage, data curve drawing, low power consumption, wide coverage, no region limitation. It’s a good operation performance.

A Wsn-Based On-Line Working Condition Monitoring System For Large Electrical Equipment

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

To solve the problems of traditional wired on-line monitoring system which has lines too much, cost too high, fault diagnosing and maintaining difficulties and...

A Wsn-Based On-Line Working Condition Monitoring System For Large Electrical Equipment

Publié en ligne: 20 févr. 2013

Pages: 297 - 316

Reçu: 08 oct. 2012

Accepté: 21 janv. 2013

DOI: https://doi.org/10.21307/ijssis-2017-541

© 2013 Xuejun Chen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.