<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This paper defines the issues required for the development of successful visualisation sensors for use in open cut and underground mines. It examines the mine environment and considers both the reflectivity of the rock and attenuation effects of dust and water droplets. Millimetre wave technology, as an alternative to the more commonly used laser and sonar implementations, is selected due to its superior penetration through adverse atmospheric conditions. Of the available radar techniques, frequency modulated continuous wave (FMCW) is selected as being the most robust. The theoretical performance of a number of 94GHz FMCW millimetre wave radar systems is determined and these confirm the capability of these sensors in the mining environment. The paper describes implementations of FMCW radar sensors for simple ranging, two dimensional line scanning and three dimensional imaging that are based on a common ranging module and in the case of the 2D and 3D applications, a common swash-plate mirror scanner. Data obtained during field trials in mines is presented to justify the selection of this technology</p></abstract>

This paper defines the issues required for the development of successful visualisation sensors for use in open cut and underground mines. It examines the mine environment and considers both the reflectivity of the rock and attenuation effects of dust and water droplets. Millimetre wave technology, as an alternative to the more commonly used laser and sonar implementations, is selected due to its superior penetration through adverse atmospheric conditions. Of the available radar techniques, frequency modulated continuous wave (FMCW) is selected as being the most robust. The theoretical performance of a number of 94GHz FMCW millimetre wave radar systems is determined and these confirm the capability of these sensors in the mining environment. The paper describes implementations of FMCW radar sensors for simple ranging, two dimensional line scanning and three dimensional imaging that are based on a common ranging module and in the case of the 2D and 3D applications, a common swash-plate mirror scanner. Data obtained during field trials in mines is presented to justify the selection of this technology

Evolution Of A Suite Of Smart Millimetre Wave Radar Systems For Situational Awareness And Automation In Mines

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper defines the issues required for the development of successful visualisation sensors for use in open cut and underground mines. It examines the mine...

Evolution Of A Suite Of Smart Millimetre Wave Radar Systems For Situational Awareness And Automation In Mines

Publié en ligne: 13 déc. 2017

Pages: 315 - 353

DOI: https://doi.org/10.21307/ijssis-2017-293

Mots clés
Millimetre wave radar, mining, range measurement, scanning, imaging, FMCWIX

© 2008 Graham Brooker et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Evolution Of A Suite Of Smart Millimetre Wave Radar Systems For Situational Awareness And Automation In Mines

Publié en ligne: 13 déc. 2017

Pages: 315 - 353

DOI: https://doi.org/10.21307/ijssis-2017-293

Mots clésMillimetre wave radar, mining, range measurement, scanning, imaging, FMCWIX

© 2008 Graham Brooker et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
Millimetre wave radar, mining, range measurement, scanning, imaging, FMCWIX