<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Aircraft design, manufacturing and CFD analysis as part of aerodynamic course, the students achieve sizing from a conceptual sketch, select the airfoil geometry and the tail geometry, calculate thrust to weight ratio and wing loading, use initial sizing and calculate the aerodynamic forces. The students design their aircraft based on the geometrical dimensions resulted from the calculations and use the model to build a prototype, test it in wind tunnel and achieve CFD analysis to be compared with the experimental results. The theory of aerodynamic is taught and applied as a project based. In this paper, the design process, aircraft manufacturing and CFD analysis are presented to show the effect of project based on student’s learning of aerodynamic course. This project based learning has improved and accelerated students understanding of aerodynamic concepts and involved students in a constructive exploration.</p>
<p>The analysis of the aircraft resulted in a study that revolved around the lift and drag generation of this particular aircraft. As to determine the lift and drag forces generated by this plane, a model was created in Solidworks a 3-D model-rendering program. After this model was created it was 3-D printed in a reduced scale, and subjected to wind tunnel testing. The results from the wind tunnel lab experiment were recorded. For accuracy, the same 3-D model was then simulated using CFD simulation software within Solidworks and compared with the results from the wind tunnel test. The values derived from both the simulation and the wind tunnel tests were then compared with the theoretical calculations for further proof of accuracy.</p>
</abstract>

Aircraft design, manufacturing and CFD analysis as part of aerodynamic course, the students achieve sizing from a conceptual sketch, select the airfoil geometry and the tail geometry, calculate thrust to weight ratio and wing loading, use initial sizing and calculate the aerodynamic forces. The students design their aircraft based on the geometrical dimensions resulted from the calculations and use the model to build a prototype, test it in wind tunnel and achieve CFD analysis to be compared with the experimental results. The theory of aerodynamic is taught and applied as a project based. In this paper, the design process, aircraft manufacturing and CFD analysis are presented to show the effect of project based on student’s learning of aerodynamic course. This project based learning has improved and accelerated students understanding of aerodynamic concepts and involved students in a constructive exploration.
The analysis of the aircraft resulted in a study that revolved around the lift and drag generation of this particular aircraft. As to determine the lift and drag forces generated by this plane, a model was created in Solidworks a 3-D model-rendering program. After this model was created it was 3-D printed in a reduced scale, and subjected to wind tunnel testing. The results from the wind tunnel lab experiment were recorded. For accuracy, the same 3-D model was then simulated using CFD simulation software within Solidworks and compared with the results from the wind tunnel test. The values derived from both the simulation and the wind tunnel tests were then compared with the theoretical calculations for further proof of accuracy.

Aircraft Design Analysis, CFD and manufacturing

International Journal of Advanced Network, Monitoring and Controls

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Aircraft Design Analysis, CFD and manufacturing"}

Aircraft design, manufacturing and CFD analysis as part of aerodynamic course, the students achieve sizing from a conceptual sketch, select the airfoil...

Aircraft Design Analysis, CFD and manufacturing

Publié en ligne: 02 avr. 2018

Pages: 59 - 67

DOI: https://doi.org/10.21307/ijanmc-2016-017

Mots clés
computational fluid dynamics (CFD), design, aircraft, aerodynamic, wind tunnel

© 2016 Haifa El-Sadi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Aircraft Design Analysis, CFD and manufacturing

Publié en ligne: 02 avr. 2018

Pages: 59 - 67

DOI: https://doi.org/10.21307/ijanmc-2016-017

Mots cléscomputational fluid dynamics (CFD), design, aircraft, aerodynamic, wind tunnel

© 2016 Haifa El-Sadi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
computational fluid dynamics (CFD), design, aircraft, aerodynamic, wind tunnel