<abstract xmlns="http://www.w3.org/1999/xhtml">

The aim of the study was to evaluate the effectiveness of the Fenton process in the treatment of selected wastewater from the foundry industry, which was initially coagulated. In the coagulation process, contaminants found in the suspended and colloidal phase were separated from the wastewater. The selection of the favorable course of the Fenton process was carried out with the following parameters in mind: wastewater pH, hydrogen peroxide dose, Fe2+/H2O2 mass ratio and process time. The selected parameters of the Fenton process were: wastewater pH 2.5, hydrogen peroxide dose 5.00 g/L, Fe2+/H2O2 mass ratio 0.3 and process time 120 min. For the given parameters, high efficiency of the Fenton process in lowering the chemical oxygen demand (COD) of the treated wastewater from the foundry industry was demonstrated. In wastewater, the concentration of non-ionic surfactants (NS) also decreased.
</abstract>

The aim of the study was to evaluate the effectiveness of the Fenton process in the treatment of selected wastewater from the foundry industry, which was initially coagulated. In the coagulation process, contaminants found in the suspended and colloidal phase were separated from the wastewater. The selection of the favorable course of the Fenton process was carried out with the following parameters in mind: wastewater pH, hydrogen peroxide dose, Fe2+/H2O2 mass ratio and process time. The selected parameters of the Fenton process were: wastewater pH 2.5, hydrogen peroxide dose 5.00 g/L, Fe2+/H2O2 mass ratio 0.3 and process time 120 min. For the given parameters, high efficiency of the Fenton process in lowering the chemical oxygen demand (COD) of the treated wastewater from the foundry industry was demonstrated. In wastewater, the concentration of non-ionic surfactants (NS) also decreased.

Treatment of Wastewater from the Foundry Industry Using Fenton Process

Architecture, Civil Engineering, Environment

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Treatment of Wastewater from the Foundry Industry Using Fenton Process"}

The aim of the study was to evaluate the effectiveness of the Fenton process in the treatment of selected wastewater from the foundry industry, which was...

Treatment of Wastewater from the Foundry Industry Using Fenton Process

Publié en ligne: 08 avr. 2020

Pages: 115 - 120

Reçu: 13 janv. 2020

Accepté: 02 févr. 2020

DOI: https://doi.org/10.21307/acee-2020-009

Mots clés
Foundry industry, Wastewater treatment, Fenton process

© 2020 Paulina Dawczak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Treatment of Wastewater from the Foundry Industry Using Fenton Process

Publié en ligne: 08 avr. 2020

Pages: 115 - 120

Reçu: 13 janv. 2020

Accepté: 02 févr. 2020

DOI: https://doi.org/10.21307/acee-2020-009

Mots clésFoundry industry, Wastewater treatment, Fenton process

© 2020 Paulina Dawczak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
Foundry industry, Wastewater treatment, Fenton process