<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The aim of the paper was to verify whether it is possible to predict thermal indoor environment in an industrial facility, characterized by large cubature and significant heat sources using a computational fluid dynamics (CFD) technique. For this purpose, thermal imaging measurements were carried out to obtain boundary conditions, followed by numerical simulations of the airflow using the Ansys CFX software. Direct results of temperature and velocity distribution of air were analyzed for two different cases. The possibility of reducing the supply airflow rate without affecting either technology safety or thermal comfort was examined. The results of calculations can be helpful for improving the energy efficiency of the tested object by indicating the optimal operating modes for given operating conditions of the production hall.</p>
</abstract>

The aim of the paper was to verify whether it is possible to predict thermal indoor environment in an industrial facility, characterized by large cubature and significant heat sources using a computational fluid dynamics (CFD) technique. For this purpose, thermal imaging measurements were carried out to obtain boundary conditions, followed by numerical simulations of the airflow using the Ansys CFX software. Direct results of temperature and velocity distribution of air were analyzed for two different cases. The possibility of reducing the supply airflow rate without affecting either technology safety or thermal comfort was examined. The results of calculations can be helpful for improving the energy efficiency of the tested object by indicating the optimal operating modes for given operating conditions of the production hall.

Research on Thermal Conditions in Ventilated Large Space Building

Architecture, Civil Engineering, Environment

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Research on Thermal Conditions in Ventilated Large Space Building"}

The aim of the paper was to verify whether it is possible to predict thermal indoor environment in an industrial facility, characterized by large cubature and...

Research on Thermal Conditions in Ventilated Large Space Building

Publié en ligne: 02 mars 2022

Pages: 169 - 178

Reçu: 24 mai 2018

Accepté: 08 oct. 2018

DOI: https://doi.org/10.21307/acee-2018-063

Mots clés
CFD, Large space building, Thermal conditions, Thermovision, Ventilation

© 2018 Agnieszka Palmowska et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Research on Thermal Conditions in Ventilated Large Space Building

Publié en ligne: 02 mars 2022

Pages: 169 - 178

Reçu: 24 mai 2018

Accepté: 08 oct. 2018

DOI: https://doi.org/10.21307/acee-2018-063

Mots clésCFD, Large space building, Thermal conditions, Thermovision, Ventilation

© 2018 Agnieszka Palmowska et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
CFD, Large space building, Thermal conditions, Thermovision, Ventilation