<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Modern industries, including those in construction, increasingly uses various types of polymer materials, which should be characterized by good mechanical properties. In this work, the effect of strain rate (10, 20, and 50 mm/min) on the tensile and properties of three polymers (high-density polyethylene (HDPE), polypropylene (PP), and polyvinylchloride (PVC)) was studied. A twin-screw extruder was used for the preparation of samples. In order to study the influence of strain rate, tensile strength was used. Mechanical property results show that the tensile properties, tensile strength, and elastic modulus increased with the increase in the strain rate, while elongation at the break point decreased.</p>
</abstract>

Modern industries, including those in construction, increasingly uses various types of polymer materials, which should be characterized by good mechanical properties. In this work, the effect of strain rate (10, 20, and 50 mm/min) on the tensile and properties of three polymers (high-density polyethylene (HDPE), polypropylene (PP), and polyvinylchloride (PVC)) was studied. A twin-screw extruder was used for the preparation of samples. In order to study the influence of strain rate, tensile strength was used. Mechanical property results show that the tensile properties, tensile strength, and elastic modulus increased with the increase in the strain rate, while elongation at the break point decreased.

Strain rate effect on the mechanical properties of thermoplastic polyolefin

Construction of Optimized Energy Potential

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Strain rate effect on the mechanical properties of thermoplastic polyolefin"}

Modern industries, including those in construction, increasingly uses various types of polymer materials, which should be characterized by good mechanical...

Strain rate effect on the mechanical properties of thermoplastic polyolefin

Publié en ligne: 02 déc. 2023

Pages: 209 - 216

DOI: https://doi.org/10.17512/bozpe.2023.12.23

Mots clés
polymeric materials, construction materials, mechanical properties, strain rate

© 2023 Mustafa Ghanim Hameed et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Strain rate effect on the mechanical properties of thermoplastic polyolefin

Publié en ligne: 02 déc. 2023

Pages: 209 - 216

DOI: https://doi.org/10.17512/bozpe.2023.12.23

Mots cléspolymeric materials, construction materials, mechanical properties, strain rate

© 2023 Mustafa Ghanim Hameed et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
polymeric materials, construction materials, mechanical properties, strain rate