Thermal Stress Effect on Density Changes of Hemp Hurds Composites

[1] Rachini A., Le Troedec M., Peyratout C. & Smith A. (2009). Comparison of the Thermal Degradation of Natural, Alkali-Treated and Silane-Treated Hemp Fibers Under Air and an Inert Atmosphere. Journal of Applied Polymer Science. 112, 226-234. DOI 10.1002/app.29412.10.1002/app.29412Search in Google Scholar

[2] Azwa Z.N., Yousif B.F., Manalo A.C. & Karunasena W. (2013). A review on the degradability of polymeric composites based on natural fibres. Materials and Design. 47, 424-442.10.1016/j.matdes.2012.11.025Search in Google Scholar

[3] Satyanarayana K.G., Arizaga G.G.C. & Wypych F. (2009). Biodegradable composites based on lignocellulosic fibers-an overview. Progress in Polymere Science. 34, 982-1021.10.1016/j.progpolymsci.2008.12.002Search in Google Scholar

[4] Preikss I., Skujans J., Adamovics A. & Iljins U. (2013). Evaluation of hemp (Cannabis Sativa L.) quality parameters for building materials from foam gypsum products. Chemical Engineering Transactions. 32, 1639-44.Search in Google Scholar

[5] Sreekala M.S., Kumaran M.G., Joseph S. & Jacob M. (2000). Oil palm fiber reinforced phenol formaldehyde composites: Influence of fiber surface modifications on the mechanical performance. Applied Composite Materials. vol. 7, 295-329.10.1023/A:1026534006291Search in Google Scholar

[6] Faruk O., Bledzki A.K., Fink H.P. & Sain M. (2012). Biocomposites reinforced with natural fibres: 2000-2010. Progress in Polymer Science. vol. 37, 1552-1596.10.1016/j.progpolymsci.2012.04.003Search in Google Scholar

[7] Cigasova J., Stevulova N., Sicakova A. & Junak J. (2013). Some aspects of lightweight composites durability. Chemical Engineering Transactions. 32, 1615-1620.Search in Google Scholar

[8] Stevulova N., Cigasova J., Purcz P., Schwarzova I., Kacik F. & Geffert A. (2015). Water Absorption Behavior of Hemp Hurds Composites. Materials. 8 (5), 2243-2257.10.3390/ma8052243Search in Google Scholar

[9] Kidalova L., Terpakova E., Priganc S. & Stevulova N. (2011). Possibilities of using hemp shives in light-weight composites. In Conference CEST 2011: 12th international conference on environmental science and technology, September 2011 (547-B-552). Rhodes, Greece: Global- NEST.Search in Google Scholar

[10] Wise L.E., Maxine M. & D'Addieco A.A. (1946). Chlorite holocellulose, its fractionation and bearing on summative wood analysis and on studies on the hemicelluloses. Paper Trade J. 122, 35-43.Search in Google Scholar

[11] Seifert V.K. (1956). Über ein neues Verfahren zur Schnellbestimmung der Rein-Cellulose. Papier. 10, 301-306.Search in Google Scholar

[12] Sluiter A., Hames B., Ruiz R., Scarlata C., Sluiter J., Templeton D. & Crocker D. (2010) . Determination of structural carbohydrates and lignin in biomass. Technical Report NREL/TP-510-42618. National Renewable Energy Laboratory: Golden. CO. USA.Search in Google Scholar

[13] Sluiter A., Hames B., Ruiz R., Scarlata C., Sluiter J. & Templeton D. (2008). Determination of ash in biomass. Technical Report NREL/TP-510-42622. National Renewable Energy Laboratory: Golden. CO. USA.Search in Google Scholar

[14] Bydzovsky J. (2009). Utilization of fast renewable raw materials in building products. In 12th International Scientific Conference, 2009 (43-46). Brno,Czech republic: Brno Technical University.Search in Google Scholar

[15] STN EN 206-1/A1. (2009). Concrete Part 1. Specification, performance, production and conformity.Search in Google Scholar

[16] STN EN 12390-7. (2011). Testing hardened concrete. Part 7. Density of hardened concrete.Search in Google Scholar

[17] Renouard S., Hano C., Doussot J., Blondeau J.P. & Lainé E. (2014). Characterization of ultrasonic impact on coir, flax and hemp fibers. Materials Letters. 129, 137-141.10.1016/j.matlet.2014.05.018Search in Google Scholar

[18] Quajai S. & Shanks R.A. (2005). Composition, structure and thermal degradation of hemp cellulose after chemical treatments. Polym Degrad Stab. 89, 327-335. 10.1016/j.polymdegradstab.2005.01.016Search in Google Scholar