Influence of Loading History and Boundary Conditions on Parameters of Soil Constitutive Models

[1] Al-Tabbaa A., Muir Wood D., An experimentally based ‘bubble’ model for clay, Numerical Methods in Geomechanics NUMOG III (eds. S. Pietruszczak and G.N. Pande), Elsevier Applied Science, London, 1989, 91–99.Search in Google Scholar

[2] Al-Tabbaa A., Permeability and stress-strain response of speswhite kaolin, PhD thesis, University of Cambridge, 1987.Search in Google Scholar

[3] Atkinson J.H., Richardson D., Stallebrass S.E., Effect of recent stress history on the stiffness of overconsolidated soil, Geotechnique, 40, No. 4, 1990, 531–540.10.1680/geot.1990.40.4.531Search in Google Scholar

[4] Atkinson J.H., The deformation of undisturbed London Clay, PhD thesis, University of London, 1973.Search in Google Scholar

[5] Bjerrum L., Lo K.Y., Effect of aging on the shear-strength properties of a normally consolidated clay, Geotechnique, 13, No. 2, 1963, 147–157.10.1680/geot.1963.13.2.147Search in Google Scholar

[6] Bouazza A., Van Impe W.F., Haegeman W., Some mechanical properties of reconstituted Boom clay, Geotechnical and Geological Engineering, 14, 1996, 341–352.10.1007/BF00421948Search in Google Scholar

[7] Burland J.B., On the compressibility and shear strength of natural clays, Geotechnique, 40, No. 3, 1990, 329–378.10.1680/geot.1990.40.3.329Search in Google Scholar

[8] Burland J.B., Ninth Laurits Bjerrum Memorial Lecture: “Small is beautiful” – the stiffness of soils at small strains, Canadian Geotechnical Journal, 26, 1989, 499–516.10.1139/t89-064Search in Google Scholar

[9] Butterfield R., A natural compression law for soils (an advance on e-log p′), Geotechnique, 29, 1979, 469–480.10.1680/geot.1979.29.4.469Search in Google Scholar

[10] Chu J., Gan C.L., Effect of void ratio on K0 of loose sand, Geotechnique, 54(4), 2004, 285–288.10.1680/geot.2004.54.4.285Search in Google Scholar

[11] Coop M.R., Atkinson J.H., Taylor R.N., Strength and stiffness of structured and unstructured soils, Proceedings of the 11th European Conference on Soil Mechanics and Foundation Engineering, Danish Geotechnical Society, Bulletin 11, Copenhagen 1995, Vol. 1, 55–62.Search in Google Scholar

[12] Cotecchia F., Chandler R.J., The influence of structure on the pre-failure behaviour of a natural clay, Geotechnique, 47, No. 3, 1997, 523–544.10.1680/geot.1997.47.3.523Search in Google Scholar

[13] Cotecchia F., The effects of structure on the properties of an Italian Pleistogene clay, PhD thesis, University of London, 1996.Search in Google Scholar

[14] Coulomb C.A., Essai sur une application des regeles de maximis & minimis a quelques problemes de statique relatifs a l’architecture, Mem. de Math. et de Phys., presentes a l’Acad. Roy. des Sci., 7, Paris, 1773, 343–382.Search in Google Scholar

[15] Dafalias Y.F., Herrmann L.R., A generalized bounding surface constitutive model for clays, Application of Plasticity and Generalized Stress-Strain in Geotechnical Engineering, eds. R.N. Yong and E.T. Selig (Proc. of the Symposium on Limit Equilibrium, Plasticity and Generalized Stress-Station Applications in Geotechnical Engineering), ASCE, 1982, 78–95.Search in Google Scholar

[16] Desai C.S., Nonlinear analyses using spline functions, J. Soil Mech. Found., ASCE, 97, SM10, 1971, 1461–1480.10.1061/JSFEAQ.0001683Search in Google Scholar

[17] Drescher A., Bojanowski W., On the influence of stress path upon the mechanical properties of granular material, Arch. Inż. Ląd., 14, 3, 1968, 351–369.Search in Google Scholar

[18] Duncan J.M., Chang C., Nonlinear analysis of stress and strain in soils, J. Soil Mech. Found., ASCE, 96, SM5, 1970, 1629–1653.10.1061/JSFEAQ.0001458Search in Google Scholar

[19] Gens A., A state boundary surface for soils not obeying Rendulic’s principle, Proc. 11th Int. Conf. on SMFE, San Francisco, Vol. 2, 1986, 473–476.Search in Google Scholar

[20] Gibson R.E., Some results concerning displacements and stresses in non-homogenous elastic halfspace, Geotechnique, 17, No. 1, 1967, 58–67.10.1680/geot.1967.17.1.58Search in Google Scholar

[21] Graham J., Noonan M.L., Lew K.V., Yield states and stress-strain relationships in a natural plastic clay, Can. Geotech. J., 20, 1983, 502–516.10.1139/t83-058Search in Google Scholar

[22] Gryczmański M., Jastrzębska M., Sternik K., One surface elastoplastic model of clay with strongly nonlinear anisotropc hardening – calibration and numerical implementation (in Polish), report: BK-254/RB-7/98, 1998, Silesian University of Technology, Gliwice.Search in Google Scholar

[23] Gryczmański M., Kowalska M., Evaluation of geotechnical parameters in modern laboratory tests accounting for loading paths, Studia Geotechnica et Mechanica, Vol. 29, No. 1–2, 2007, 47–54.Search in Google Scholar

[24] Gryczmański M., On calibration of soil constitutive models (in Polish), Zeszyty Naukowe Politechniki Śląskiej. Budownictwo, z. 80, 1995, 37–52.Search in Google Scholar

[25] Gryczmański M., State of the art in modeling of soil behavior at small strains, Architecture Civil Engineering Environment, Vol. 2, No. 1, 2009, 61–80.Search in Google Scholar

[26] Gryczmański M., Introduction to description of elastoplastic models of soil (in Polish), Studia z Zakresu Inżynierii, nr 40, PAN, Warszawa, 1995.Search in Google Scholar

[27] Hardin B.O., Drnevich V.P., Shear modulus and damping in soils: measurement and parameter effects, Journal of Soil Mechanics and Foundations Div. ASCE, Vol. 98, No. SM6, 1972, 603–623.10.1061/JSFEAQ.0001756Search in Google Scholar

[28] Hardin B.O., The nature of stress-strain behavior for soils, Proc. ASCE Geotechnical Division Specialty Conference on Earthquake Engineering and Soil Dynamics, Pasadena, 1978, 1, 3–90.Search in Google Scholar

[29] Henkel D.J., Sowa V., The influence of stress history on the stress paths followed in undrained triaxial tests, Proc. ASTM Symp. Shear Testing of Soils, Ottawa, 1963, 280–291.10.1520/STP30004SSearch in Google Scholar

[30] Jamiolkowski M., Lo Presti D.C.F., Pallara O., Role of in-situ testing in geotechnical earthquake engineering, 3rd Int. Conf. on Recent Advances in Geotech. Earthquake Engng. and Soil Dynamics, 1995, State-of-the-Art Report, 7.3, 1523–1546.Search in Google Scholar

[31] Jardine R.J., Fourie A.B., Maswoswe J., Burland J.B., Field and laboratory measurements of soil stiffness, Proc. 11th International Conference on Soil Mechanics and Foundation Engineering. San Francisco, Vol. 2, 1985, 511–514.Search in Google Scholar

[32] Jardine R.J., Potts D.M., Fourie A.B., Burland J.B., Studies on the influence of non-linear stress-strain characteristics in soil-structure interaction, Geotechnique, 36, 1986, 377–396.10.1680/geot.1986.36.3.377Search in Google Scholar

[33] Jardine R.J., Symes M.J., Burland J.B., The measurement of soil stiffness in the triaxial apparatus, Geotechnique, 34, No. 3, 1984, 323–340.10.1680/geot.1984.34.3.323Search in Google Scholar

[34] Jardine R.J., Some observations on the kinematic nature of soil stiffness, Soils and Foundations, 1992, Vol. 32, No. 2, Japanese Society of Soil Mechanics and Foundation Engineering, 111–124.10.3208/sandf1972.32.2_111Search in Google Scholar

[35] Jastrzębska M., Investigations of the behaviour of cohesive soils subjected to cyclic loads in the range of small deformations (in Polish), Monograph. Zeszyty Naukowe Politechniki Śląskiej, Wydawnictwo Politechniki Śląskiej, Gliwice, 2010.Search in Google Scholar

[36] Jefferies M.G., Shuttle D.A., Dilatancy In general Cambridge-type models, Geotechnique, 52(9), 2002, 625–638.10.1680/geot.2002.52.9.625Search in Google Scholar

[37] Kamegai Y., Deformation characteristics of sands by plane strain compression tests, Master of Engineering Thesis, University of Tokyo, 1994 (in Japanese).Search in Google Scholar

[38] Kawaguchi T., Mitachi T., Shibuya S., Drained and undrained elastic moduli of reconstituted clay, Proc. International Conference on Soil Mechanics and Geotechnical Engineering (16ICSMGE), Osaka, 2005.Search in Google Scholar

[39] Kowalska M., Gryczmański M., Role of the stress path method in the contemporary investigation for civil engineering purposes (in Polish), Zeszyty Naukowe Politechniki Białostockiej, Budownictwo, z. 28, t. 2, Białystok, 2006, 163–172.Search in Google Scholar

[40] Kowalska M., Calibration of Modified Cam Clay Model with use of Loading Path Method and Genetic Algorithms, Proc. XVIII European Young Geotech. Eng. Conference, Ancona (Italy), 2007.Search in Google Scholar

[41] Kowalska M., Parametric identification of soil models in geotechnical problems (in Polish), PhD thesis, Silesian University of Technology, Gliwice, 2009.Search in Google Scholar

[42] Kowalska M., Calibration of soil models with stress path method (in Polish), Zeszyty Naukowe Politechniki Śląskiej, nr 1695, Wydawnictwo Politechniki Śląskiej, Gliwice, 2005, 195–202.Search in Google Scholar

[43] Kowalska M., Various aspects of parameters in geotechnics, Architecture Civil Engineering Environment, Vol. 3, No. 1, Gliwice 2010, 47–52.Search in Google Scholar

[44] Ladd C.C., Stress-strain modulus of clay in undrained shear, Journal of Soil Mechanics and Foundations Division. Proc. of ASCE, Vol. 90. No. SM5, 1964, 103–132.10.1061/JSFEAQ.0000647Search in Google Scholar

[45] Lade P.V., Duncan J.M., Stress path dependent behaviour of cohesionless soil, J. Geotech. Eng., ASCE, 102, GT1, 1976, 51–68.10.1061/AJGEB6.0000235Search in Google Scholar

[46] Lambe T.W., Methods of estimating settlement, Journal of Soil Mechanics and Foundations Division, Proc. of ASCE, Vol. 90. No. SM5, 1964, 43–67.10.1061/JSFEAQ.0000662Search in Google Scholar

[47] LeLievre B., Wang B., Discussion on stress-probe experiments on saturated normally consolidated clay, Geotechnique, 20, No. 1, 1970, 38–56.10.1680/geot.1970.20.1.38Search in Google Scholar

[48] Leroueil S., Vaughan P.R., The general and congruent effects of structure in natural soils and weak rocks, Geotechnique, 40, No. 3, 1990, 467–488.10.1680/geot.1990.40.3.467Search in Google Scholar

[49] Lewin P.I., Burland J.B., Stress-probe experiments on saturated normally consolidated clay, Geotechnique, 20, 1970, 461–463.10.1680/geot.1970.20.1.38Search in Google Scholar

[50] Maccarini M., A comparison of direct shear box tests with triaxial compression tests for a residual soil, Geotechnical and Geological Engineering, 11, 1993, 69–80.10.1007/BF00423336Search in Google Scholar

[51] Mc Dowell G.R., Hau K.W., A simple non-associated three surface kinematic hardening model, Géotechnique, 53(4), 2003, 433–437.10.1680/geot.2003.53.4.433Search in Google Scholar

[52] Mitchell J.K., Soga K., Fundamentals of Soil Behaviour, 3rd ed., John Wiley & Sons, New Jersey, 2005.Search in Google Scholar

[53] Młynarek Z., Gogolik S., Gryczmański M., Uliniarz R., Settlement analysis of a cylindrical tank based on CPTU and SDMT results, Proceedings of the 4th International Conference on Geotechnical and Geophysical Site Characterization (ISC-4), Porto de Galinhas, Brasil, 18–21 September 2012.Search in Google Scholar

[54] Młynarek Z., Wierzbicki J., Long M., Factors affecting CPTU and DMT characteristics in organic soils, Proc. of XIth Baltic Sea Geotechnical Conference, Vol. 1, Gdańsk, 2008, 407–417.Search in Google Scholar

[55] Mohr O., Welche Umstände bedingen die Elastizitätsgrenze und den Bruch eines Materiales? Zeitschrift des Vereines Deutscher Ingenieure, 44, 1900, 1–12.Search in Google Scholar

[56] Moroto N., Shearing deformation of granular materials such as sand, Report, Department of Civil Engineering, Hachinohe Institute of Technology, Hachinohe, Aomori, Japan, 1980.10.3208/sandf1972.20.2_113Search in Google Scholar

[57] Moxhay A.L., Tinsley R.D., Sutton J.A., Monitoring of soil stiffness during ground improvement using seismic surface waves, 2001, http://www.surfacewavesurveys.co.uk/downloads/GrdEngArticle.pdf (February 2012).Search in Google Scholar

[58] Muir Wood D., Soil behaviour and critical state soil mechanics, Cambridge, Cambridge University Press, 1990.10.1017/CBO9781139878272Search in Google Scholar

[59] Newland P.L., An Experimental Study of the Stress Strain Characteristics of a “Wet” Clay and Their Relevance to Settlement Analysis, Technical Report No. 15, Commonwealth Scientific and Industrial Research Organization, Melbourne, Australia, 1970.Search in Google Scholar

[60] PN-81/B-03020 Building soils. Foundation bases. Static calculation and design.Search in Google Scholar

[61] Power P.T., The use of electric cone penetrometer in the determination of the engineering properties of chalk, Proc. 2nd European Symposium on Penetration Testing, ESOPT-II, Amsterdam, Balkema Pub., Rotterdam, 2, 1982, 769–774.Search in Google Scholar

[62] Puzrin A.M., Burland J.B., Non-linear model of small-strain behaviour of soils, Geotechnique, 48, 1998, 217–233.10.1680/geot.1998.48.2.217Search in Google Scholar

[63] Rendulic L., Relationship Between Void Ratio and Effective Principal Stresses for a Remolded Silty Clay, Proc. of 1st International Conference on Soil Mechanics and Foundation Engineering, Cambridge, Mass., Vol. 3, 1936, 48–51.Search in Google Scholar

[64] Roscoe K.H., Burland J.B., On the generalized stress–strain behaviour of “wet clay”, Engineering plasticity, eds. J. Heyman & F.A. Leckie, Cambridge University Press, Cambridge, 1968, 535–609.Search in Google Scholar

[65] Sanetra U., Pacześniowski K., Calculation of internal friction angle and rock coherence by means of the method tangent to the envelope of Mohr’s circles in the form of a parabola (in Polish), Prace Naukowe GIG, Górnictwo i Środowisko, 2/2006, 23–34.Search in Google Scholar

[66] Schnaid F., In Situ Testing in Geomechanics, London and New York, Taylor & Francis, 2009.10.1201/9781482266054Search in Google Scholar

[67] Schofield A.N., The “Mohr–Coulomb” error, Mechanics & Geotechnique, ed. Luong, LMS Ecole Polytechnique, 1998, 19–27.Search in Google Scholar

[68] Shibuya S., Assessing Structure of Aged Natural Sedimentary Clays, Soils and Foundations, 40, No. 3, 2000, 1–16.10.3208/sandf.40.3_1Search in Google Scholar

[69] Simons N.E., The stress path method of settlement analysis applied to London clay, Stress-strain behaviour of soils (ed. R.H.G. Parry), Proc. of Roscoe Memorial Symposium, Cambridge, 1971, 241–252.Search in Google Scholar

[70] Smith P.R., Jardine R.J., Hight D.W., The yielding of Bothkennar clay, Geotechnique, 42, No. 2, 1992, 257–274.10.1680/geot.1992.42.2.257Search in Google Scholar

[71] Som N.N., The effect of stress path on the deformation and consolidation of London clay, PhD thesis, University of London, 1968.Search in Google Scholar

[72] Stallebrass S.E., Taylor R.N., The development and evaluation of a constitutive model for the prediction of ground movements in overconsolidated clay, Géotechnique, 47 (2), 1997, 235–253.10.1680/geot.1997.47.2.235Search in Google Scholar

[73] Sukolrat J., Structure and destructuration of Bothkennar clay, PhD thesis, University of Bristol, 2006.Search in Google Scholar

[74] Świdziński W., Compaction-Liquefaction Mechanisms of Granular Soils (in Polish), IBW PAN, Gdańsk, 2006.Search in Google Scholar

[75] Tatsuoka F., Ishihara K., Stress path and dilatancy performance of a sand, Proc. 8th ICSMFE, Moscow, Vol. 1, 1973, 419–424.Search in Google Scholar

[76] Tatsuoka F., Santucci de Magistris F., Hayano K., Momoya Y., Koseki J., Some new aspects of time effects on the stress-strain behaviour of stiff materials, Keynote Lecture, Proc. 2nd Int. Conf. Geotechnics of Hard Soils and Soft Rocks, Balkema, Rotterdam, Vol. 3, 1998, 1285–1371.Search in Google Scholar

[77] Tschuschke W., Cone penetration testing in mine tailings (in Polish), Monograph, Zeszyty Naukowe Politechniki Śląskiej, Wydawnictwo Politechniki Śląskiej, Gliwice, 2006.Search in Google Scholar

[78] van Eekelen H.A.M., Isotropic Yield Surfaces in Three Dimensions for Use in Soil Mechanics, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 4, 1980, 89–101.10.1002/nag.1610040107Search in Google Scholar

[79] Wanatowski D., Chu J., Static liquefaction of Sand in plane strain, Canadian Geotechnical Journal, 44, 2007, 299–313.10.1139/t06-078Search in Google Scholar

[80] Wanatowski D., Chu J., Undrained behavior of Changi sand in triaxial and plane strain compression, Geomechanics and Geoengineering: An International Journal, Vol. 3, No. 2, June 2008, 85–96.10.1080/17486020701742608Search in Google Scholar

[81] Wiłun Z., An outline of geotechnical engineering (in Polish), Wydawnictwa Komunikacji i Łączności, Warszawa 1976.Search in Google Scholar

[82] Yasin S.J.M., Tatsuoka F., Stress history-dependent deformation characteristics of dense sand in plane strain, Soils and Foundations, Vol. 40, No. 2, 2000, Japanese Geotechnical Society, 77–98.10.3208/sandf.40.2_77Search in Google Scholar

[83] Yudhbir, Mathur S.K., Kuganathan V., Critical State Parameters, Journal of the Geotechnical Engineering Division, Proc. ASCE, Vol. 104, No. GT4, 1978, 497–501.10.1061/AJGEB6.0000617Search in Google Scholar