Comparison of the Viscous Liquids Spraying by the OIG and the Oil Configurations of an Effervescent Atomizer at Low Inlet Pressures

[1] ABDULKADIR, M., HERNANDEZ-PEREZ, V., LO, S., LOWNDES, I.S., AZZOPARDI, B.J.: Comparison of experimental and Computational Fluid Dynamics (CFD) studies of slug flow in a vertical riser, Experimental Thermal and Fluid Science, Volume 68, November 2015, pp. 468-483, ISSN 0894-177710.1016/j.expthermflusci.2015.06.004Search in Google Scholar

[2] BAKER, O.: Simultaneous flow of oil and gas, Oil Gas J., 53, 1954, pp. 185–195Search in Google Scholar

[3] BARNEA, D.: A unified model for predicting flow-pattern transitions for the whole range of pipe inclinations, Int. J. Multiphase Flow, 13, 198710.1016/0301-9322(87)90002-4Search in Google Scholar

[4] BUCKNER, H.N., SOJKA P.E.: Effervescent atomization of high-viscosity fluids. Part 1: Newtonian liquids, Atomization Sprays, 1, 1991, pp. 239–252Search in Google Scholar

[5] FERREIRA G., GARCÍA J.A., BARRERAS F., LOZANO A., LINCHETA E.: Design optimization of twin-fluid atomizers with an internal mixing chamber for heavy fuel oils, Fuel Process. Technol.,90, 2009, pp. 270–27810.1016/j.fuproc.2008.09.013Search in Google Scholar

[6] JEDELSKY J., JICHA M.: Energy conversion during effervescent atomization, Fuel, Volume 111, September 2013, Pages 836-844, ISSN 0016-236110.1016/j.fuel.2013.03.053Search in Google Scholar

[7] LORCHER, M., SCHMIDT, F., MEWES, D.: Flow field and phase distribution inside effervescent atomizers. In: 9th ICLASS 2003, 2003, pp. 12–9.Search in Google Scholar

[8] MANDAL, A., JOG, M.A., XUE, J., IBRAHIM, A.A.: Flow of power-law fluids in simplex atomizers, International Journal of Heat and Fluid Flow, Volume 29, Issue 5, October 2008, pp. 1494-1503, ISSN 0142-727X10.1016/j.ijheatfluidflow.2008.05.006Search in Google Scholar

[9] MLKVIK, M., STÄHLE, P., SCHUCHMANN, H. P., GAUKEL, V., JEDELSKY, J., JICHA, M.: Twin-fluid atomization of viscous liquids: The effect of atomizer construction on breakup process, spray stability and droplet size. International Journal of Multiphase Flow, 77, 2015, pp. 19-3110.1016/j.ijmultiphaseflow.2015.06.010Search in Google Scholar

[10] SCHRÖDER J., KRAUS S., ROCHA B.B., GAUKEL V., SCHUCHMANN H.P.: Characterization of gelatinized corn starch suspensions and resulting drop size distributions after effervescent atomization, J. Food Eng.,105, 2011, pp. 656–66210.1016/j.jfoodeng.2011.03.028Search in Google Scholar

[11] STÄHLE, P., GAUKEL, V., SCHUCHMANN, H.P.: Influence of mixing chamber length and liquid viscosity on the effervescent atomization of maltodextrin solutions. In: ILASS – Europe, 2013, Chania, GreeceSearch in Google Scholar

[12] GOGA V., HUČKO B.: Phenomenological Material Model of Foam Solids. In Journal of Mechanical Engineering - Strojnícky časopis, Vol. 65, No. 1, 2015, pp.5-20, ISSN 0039-247210.1515/scjme-2016-0001Search in Google Scholar