Accès libre

Application of GPR and FWD in Assessing Pavement Bearing Capacity

À propos de cet article

Citez

[1]. J. WENZLICK, T. SCULLONO, K.R. MASER: “High Accuracy Pavement Thickness Measurement Using Ground Penetrating Radar”, Missouri Department of Transportation Research, Development and Technology Division, February 1999.Search in Google Scholar

[2]. M.OŽBOLT, T. RUKAVINA, J.DOMITROVIĆ: “Comparison of pavement layer thickness measured by GPR and conventional methods”, The Baltic Journal of Road and Bridge engineering, vol.7, no.1, 2012.10.3846/bjrbe.2012.04Search in Google Scholar

[3]. T. SATTENKETO: “Timo, Electrical properties of road materials and subgrade soils and the use of Ground Penetrating Radar in traffic infrastructure surveys”, Faculty of Science, Department of Geosciences, University of Oulu, Finland, 2006.Search in Google Scholar

[4]. S. FONTUL: “Structural Evaluation of Flexible Pavements Using Non-Destructive Tests”, PhD thesis, LNEC, Lisabon, Portugal, 2004.Search in Google Scholar

[5]. F.ZHOU, T. SCULLION: “Guidelines for evaluation of existing pavements for HMA overlay”, Report 0-5123-2, Texas Transportation Institute, Texas, November 2006.Search in Google Scholar

[6]. S. ALAVI, J.F. LECATES, M.P. TAVARES: “Falling Weight Deflectometer Usage, A Synthesis of Highway Practice”, NCHRP Synthesis 381, Sierra Transportation Engineers, Inc.Reno, Nevada, 2008.Search in Google Scholar

[7]. “Use of Falling Weight Deflectometers in Pavement Evaluation”, COST 336, European Commission, Directorate General Transport, April 2005.Search in Google Scholar