<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The article describes the flow rates of mineral oil and water flowing, as working media, through the commutation unit of a hydraulic satellite motor. It is demonstrated that geometrical dimensions of commutation unit clearances change as a function of the machine shaft rotation angle. Methods for measuring the rate of this flow and the pressure in the working chamber are presented. The results of pressure measurements in the working chamber during the transition from the filling cycle to the emptying cycle are included. The pressure in the motor’s working chamber changes linearly as a function of the shaft rotation angle, which has a significant effect on the leakage in the commutation unit clearances. The paper presents new mathematical formulas in the form: Q=f(Δp<sup>γ</sup>) to calculate the flow rate of water and mineral oil in the commutation unit clearances. The γ factor is described as a function of fluid viscosity and clearance length (the motor shaft rotation angle). The coefficients used in these formulas were determined based on the results of laboratory tests of a motor supplied with water and mineral oil.</p></abstract>

The article describes the flow rates of mineral oil and water flowing, as working media, through the commutation unit of a hydraulic satellite motor. It is demonstrated that geometrical dimensions of commutation unit clearances change as a function of the machine shaft rotation angle. Methods for measuring the rate of this flow and the pressure in the working chamber are presented. The results of pressure measurements in the working chamber during the transition from the filling cycle to the emptying cycle are included. The pressure in the motor’s working chamber changes linearly as a function of the shaft rotation angle, which has a significant effect on the leakage in the commutation unit clearances. The paper presents new mathematical formulas in the form: Q=f(Δpγ) to calculate the flow rate of water and mineral oil in the commutation unit clearances. The γ factor is described as a function of fluid viscosity and clearance length (the motor shaft rotation angle). The coefficients used in these formulas were determined based on the results of laboratory tests of a motor supplied with water and mineral oil.

Influence of Water and Mineral Oil on the Leaks in Satellite Motor Commutation Unit Clearances

Polish Maritime Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The article describes the flow rates of mineral oil and water flowing, as working media, through the commutation unit of a hydraulic satellite motor. It is...

Influence of Water and Mineral Oil on the Leaks in Satellite Motor Commutation Unit Clearances

Publié en ligne: 11 oct. 2017

Pages: 58 - 67

DOI: https://doi.org/10.1515/pomr-2017-0090

Mots clés
flow in clearances, commutation unit, satellite motor, degree of flow laminarity, water, oil

© 2017 Paweł Śliwiński, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Influence of Water and Mineral Oil on the Leaks in Satellite Motor Commutation Unit Clearances

Publié en ligne: 11 oct. 2017

Pages: 58 - 67

DOI: https://doi.org/10.1515/pomr-2017-0090

Mots clésflow in clearances, commutation unit, satellite motor, degree of flow laminarity, water, oil

© 2017 Paweł Śliwiński, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
flow in clearances, commutation unit, satellite motor, degree of flow laminarity, water, oil