<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The tumblehome hull adopts some novelty designs such as low-tumblehome freeboard and wave-piercing bow. The new form design makes the ship have many special hydrodynamic performances. Especially the green water of tumblehome hull is different from that of hulls with flare free board. Green water is a strong nonlinear phenomenon of ship-wave interaction, the variation of free surface of liquid is complicated, and there are still some difficulties to solve green water problems well with numerical simulation method. In this paper firstly the motion responses of the tumblehome hull was calculated based on 3D potential theory, and then the dam-break flow model was used to calculate green water height and pressure distribution. According to the result of numerical simulation, some typical working conditions are chosen for 3D CFD simulation using RANS method. The results of numerical simulation methods are compared with the experimental results measured in towing tank. The influence of different ship form parameters and wave parameters to the green water of tumblehome hull is analyzed, and some regularities of green water on tumblehome hull in regular waves are summarized.</p></abstract>

The tumblehome hull adopts some novelty designs such as low-tumblehome freeboard and wave-piercing bow. The new form design makes the ship have many special hydrodynamic performances. Especially the green water of tumblehome hull is different from that of hulls with flare free board. Green water is a strong nonlinear phenomenon of ship-wave interaction, the variation of free surface of liquid is complicated, and there are still some difficulties to solve green water problems well with numerical simulation method. In this paper firstly the motion responses of the tumblehome hull was calculated based on 3D potential theory, and then the dam-break flow model was used to calculate green water height and pressure distribution. According to the result of numerical simulation, some typical working conditions are chosen for 3D CFD simulation using RANS method. The results of numerical simulation methods are compared with the experimental results measured in towing tank. The influence of different ship form parameters and wave parameters to the green water of tumblehome hull is analyzed, and some regularities of green water on tumblehome hull in regular waves are summarized.

Study on Green Water of Tumblehome Hull Using Dam-Break Flow and Ranse Models

Polish Maritime Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Study on Green Water of Tumblehome Hull Using Dam-Break Flow and Ranse Models"}

The tumblehome hull adopts some novelty designs such as low-tumblehome freeboard and wave-piercing bow. The new form design makes the ship have many special...

Study on Green Water of Tumblehome Hull Using Dam-Break Flow and Ranse Models

Publié en ligne: 13 sept. 2017

Pages: 172 - 180

DOI: https://doi.org/10.1515/pomr-2017-0080

Mots clés
Tumblehome hull, Green water, Dam-break flow, RANSE

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Study on Green Water of Tumblehome Hull Using Dam-Break Flow and Ranse Models

Publié en ligne: 13 sept. 2017

Pages: 172 - 180

DOI: https://doi.org/10.1515/pomr-2017-0080

Mots clésTumblehome hull, Green water, Dam-break flow, RANSE

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
Tumblehome hull, Green water, Dam-break flow, RANSE